From patchwork Tue Mar 22 12:48:17 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Haojian Zhuang X-Patchwork-Id: 64167 Delivered-To: patch@linaro.org Received: by 10.112.199.169 with SMTP id jl9csp2041148lbc; Tue, 22 Mar 2016 05:48:46 -0700 (PDT) X-Received: by 10.98.66.90 with SMTP id p87mr53292859pfa.78.1458650926241; Tue, 22 Mar 2016 05:48:46 -0700 (PDT) Return-Path: Received: from ml01.01.org (ml01.01.org. [198.145.21.10]) by mx.google.com with ESMTPS id h74si15942937pfd.163.2016.03.22.05.48.45 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 22 Mar 2016 05:48:46 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) client-ip=198.145.21.10; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dkim=neutral (body hash did not verify) header.i=@linaro.org Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 911F71A1FE7; Tue, 22 Mar 2016 05:49:09 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Delivered-To: edk2-devel@lists.01.org Received: from mail-pf0-x22e.google.com (mail-pf0-x22e.google.com [IPv6:2607:f8b0:400e:c00::22e]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 18D8E1A1FE7 for ; Tue, 22 Mar 2016 05:49:08 -0700 (PDT) Received: by mail-pf0-x22e.google.com with SMTP id u190so311594552pfb.3 for ; Tue, 22 Mar 2016 05:48:44 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=a4TNgUnfgNEDT9lzt1lijuy3KlYh69R3OokGnFOul/I=; b=dBbdZpSSZ7lwWqOUGRzmR95lYyFUIPEsg4Uqx3MNn2NoPQKpOAFlDT0NkjYDjx3/vo vGEiZY2UjljUa4/0PhvopL0oDTwVBO6zupgn/PGlOwwANDpor7npPQiB+6oG29WXg/ju EWLTNR6UCOcK2V2QO4mLQbbriGUjfntQ9W4ow= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=a4TNgUnfgNEDT9lzt1lijuy3KlYh69R3OokGnFOul/I=; b=I6bhVzx0lRxM6oPjnGPUC3LiY4cIL4nufoWq1pLCPVP+5f3ceJ301LzgUF6Rdurgz/ ePwzBiDo8i4yInbyG96qx6NBaA+MDOtKu0TlVMYPaBCgNPH0cI+6d9U1aEdP6zRHMnRn 4K/2N2Kw/hwK+P9HmNIe7eCpddT4mnU/hErb3hcZIN0CiZvVHP2qTMQEg4f+DkQYSJ7x kWvk1O3mXuVCA4RluLKe0SsIw2WiiIaUCueYFoaaMgbV4C2eNKzGFa8eShdl+Ce3n1N0 48E+2beKNT1kQwcIuN2Q4n3ybu0cpAYBwom6R1LltqkQIlr+LGtHErHkc4B4kViWIj1K q8IQ== X-Gm-Message-State: AD7BkJKL0EFqNAb7DX//NU8fKa76DneWH/vAWfHx5LzVYOItkpuPUVOwSDui99H3uzhgcuJx X-Received: by 10.98.16.210 with SMTP id 79mr53481350pfq.69.1458650921997; Tue, 22 Mar 2016 05:48:41 -0700 (PDT) Received: from localhost.localdomain ([104.237.91.127]) by smtp.gmail.com with ESMTPSA id 9sm48245982pft.44.2016.03.22.05.48.39 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 22 Mar 2016 05:48:41 -0700 (PDT) From: Haojian Zhuang To: ryan.harkin@linaro.org, edk2-devel@lists.01.org, leif.lindholm@linaro.org, ard.biesheuvel@linaro.org Date: Tue, 22 Mar 2016 20:48:17 +0800 Message-Id: <1458650901-7229-6-git-send-email-haojian.zhuang@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1458650901-7229-1-git-send-email-haojian.zhuang@linaro.org> References: <1458650901-7229-1-git-send-email-haojian.zhuang@linaro.org> Subject: [edk2] [PATCH v2 5/9] MmcDxe: declare ECSD structure X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Cc: Haojian Zhuang MIME-Version: 1.0 Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" Declare fields in ECSD structure. And drop the original 128 words arrary. Signed-off-by: Haojian Zhuang --- EmbeddedPkg/Universal/MmcDxe/Mmc.h | 157 ++++++++++++++++++++++- EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 4 +- 2 files changed, 158 insertions(+), 3 deletions(-) -- 1.9.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h index b1c5153..0ccbc80 100644 --- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h +++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h @@ -133,13 +133,168 @@ typedef struct { UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126] } CSD; +typedef struct { + UINT8 RESERVED_1[16]; // Reserved [15:0] + UINT8 SECURE_REMOVAL_TYPE; // Secure Removal Type [16:16] + UINT8 PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17] + UINT8 MAX_PRE_LOADING_DATA_SIZE[4]; // MAX pre loading data size [21:18] + UINT8 PRE_LOADING_DATA_SIZE[4]; // Pre loading data size [25:22] + UINT8 FFU_STATUS; // FFU Status [26:26] + UINT8 RESERVED_2[2]; // Reserved [28:27] + UINT8 MODE_OPERATION_CODES; // Mode operation codes [29:29] + UINT8 MODE_CONFIG; // Mode config [30:30] + UINT8 RESERVED_3; // Reserved [31:31] + UINT8 FLUSH_CACHE; // Flushing of the cache [32:32] + UINT8 CACHE_CTRL; // Control to turn the cache ON/OFF [33:33] + UINT8 POWER_OFF_NOTIFICATION; // Power Off Notification [34:34] + UINT8 PACKED_FAILURE_INDEX; // Packed command failure index [35:35] + UINT8 PACKED_COMMAND_STATUS; // Packed command status [36:36] + UINT8 CONTEXT_CONF[15]; // Context configuration [51:37] + UINT8 EXT_PARTITIONS_ATTRIBUTE[2]; // Extended partitions attribute [53:52] + UINT8 EXCEPTION_EVENTS_STATUS[2]; // Exception events status [55:54] + UINT8 EXCEPTION_EVENTS_CTRL[2]; // Exception events control [57:56] + UINT8 DYNCAP_NEEDED; // Number of addressed group to be released [58:58] + UINT8 CLASS_6_CTRL; // Class 6 commands control [59:59] + UINT8 INI_TIMEOUT_EMU; // 1st initialization after disabling sector size emulation [60:60] + UINT8 DATA_SECTOR_SIZE; // Sector size [61:61] + UINT8 USE_NATIVE_SECTOR; // Sector size emulation [62:62] + UINT8 NATIVE_SECTOR_SIZE; // Native sector size [63:63] + UINT8 VENDOR_SPECIFIC_FIELD[64]; // Vendor specific fields [127:64] + UINT8 RESERVED_4[2]; // Reserved [129:128] + UINT8 PROGRAM_CID_CSD_DDR_SUPPORT; // Program CID/CSD in DDR mode support [130:130] + UINT8 PERIODIC_WAKEUP; // Periodic wake-up [131:131] + UINT8 TCASE_SUPPORT; // Package case temperature is controlled [132:132] + UINT8 PRODUCTION_STATE_AWARENESS; // Production state awareness [133:133] + UINT8 SEC_BAD_BLK_MGMNT; // Bad block management mode [134:134] + UINT8 RESERVED_5; // Reserved [135:135] + UINT8 ENH_START_ADDR[4]; // Enhanced user data start address [139:136] + UINT8 ENH_SIZE_MULT[3]; // Enhanced user data area size [142:140] + UINT8 GP_SIZE_MULT[12]; // General purpose partition size [154:143] + UINT8 PARTITION_SETTING_COMPLETED; // Partitioning setting [155:155] + UINT8 PARTITIONS_ATTRIBUTE; // Partitions attribute [156:156] + UINT8 MAX_ENH_SIZE_MULT[3]; // Max enhanced area size [159:157] + UINT8 PARTITIONING_SUPPORT; // Partitioning [160:160] + UINT8 HPI_MGMT; // HPI management [161:161] + UINT8 RST_N_FUNCTION; // H/W reset function [162:162] + UINT8 BKOPS_EN; // Enable background operations handshake [163:163] + UINT8 BKOPS_START; // Manually start background operations [164:164] + UINT8 SANITIZE_START; // Start sanitize operation [165:165] + UINT8 WR_REL_PARAM; // Write reliability parameter register [166:166] + UINT8 WR_REL_SET; // Write reliability setting register [167:167] + UINT8 RPMB_SIZE_MULT; // RPMB size [168:168] + UINT8 FW_CONFIG; // FW configuration [169:169] + UINT8 RESERVED_6; // Reserved [170:170] + UINT8 USER_WP; // User area write protection register [171:171] + UINT8 RESERVED_7; // Reserved [172:172] + UINT8 BOOT_WP; // Boot area write protection register [173:173] + UINT8 BOOT_WP_STATUS; // Boot write protection register [174:174] + UINT8 ERASE_GROUP_DEF; // High-density erase group definition [175:175] + UINT8 RESERVED_8; // Reserved [176:176] + UINT8 BOOT_BUS_CONDITIONS; // Boot bus conditions [177:177] + UINT8 BOOT_CONFIG_PROT; // Boot config protection [178:178] + UINT8 PARTITION_CONFIG; // Partition config [179:179] + UINT8 RESERVED_9; // Reserved [180:180] + UINT8 ERASED_MEM_CONT; // Erased memory content [181:181] + UINT8 RESERVED_10; // Reserved [182:182] + UINT8 BUS_WIDTH; // Bus width mode [183:183] + UINT8 RESERVED_11; // Reserved [184:184] + UINT8 HS_TIMING; // High-speed interface timing [185:185] + UINT8 RESERVED_12; // Reserved [186:186] + UINT8 POWER_CLASS; // Power class [187:187] + UINT8 RESERVED_13; // Reserved [188:188] + UINT8 CMD_SET_REV; // Command set revision [189:189] + UINT8 RESERVED_14; // Reserved [190:190] + UINT8 CMD_SET; // Command set [191:191] + UINT8 EXT_CSD_REV; // Extended CSD revision [192:192] + UINT8 RESERVED_15; // Reserved [193:193] + UINT8 CSD_STRUCTURE; // CSD Structure [194:194] + UINT8 RESERVED_16; // Reserved [195:195] + UINT8 DEVICE_TYPE; // Device type [196:196] + UINT8 DRIVER_STRENGTH; // I/O Driver strength [197:197] + UINT8 OUT_OF_INTERRUPT_TIME; // Out-of-interrupt busy timing [198:198] + UINT8 PARTITION_SWITCH_TIME; // Partition switching timing [199:199] + UINT8 PWR_CL_52_195; // Power class for 52MHz at 1.95V 1 R [200:200] + UINT8 PWR_CL_26_195; // Power class for 26MHz at 1.95V 1 R [201:201] + UINT8 PWR_CL_52_360; // Power class for 52MHz at 3.6V 1 R [202:202] + UINT8 PWR_CL_26_360; // Power class for 26MHz at 3.6V 1 R [203:203] + UINT8 RESERVED_17; // Reserved [204:204] + UINT8 MIN_PERF_R_4_26; // Minimum read performance for 4bit at 26MHz [205:205] + UINT8 MIN_PERF_W_4_26; // Minimum write performance for 4bit at 26MHz [206:206] + UINT8 MIN_PERF_R_8_26_4_52; // Minimum read performance for 8bit at 26MHz, for 4bit at 52MHz [207:207] + UINT8 MIN_PERF_W_8_26_4_52; // Minimum write performance for 8bit at 26MHz, for 4bit at 52MHz [208:208] + UINT8 MIN_PERF_R_8_52; // Minimum read performance for 8bit at 52MHz [209:209] + UINT8 MIN_PERF_W_8_52; // Minimum write performance for 8bit at 52MHz [210:210] + UINT8 RESERVED_18; // Reserved [211:211] + UINT32 SEC_COUNT; // Sector count [215:212] + UINT8 SLEEP_NOTIFICATION_TIME; // Sleep notification timout [216:216] + UINT8 S_A_TIMEOUT; // Sleep/awake timeout [217:217] + UINT8 PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218] + UINT8 S_C_VCCQ; // Sleep current (VCCQ) [219:219] + UINT8 S_C_VCC; // Sleep current (VCC) [220:220] + UINT8 HC_WP_GRP_SIZE; // High-capacity write protect group size [221:221] + UINT8 REL_WR_SEC_C; // Reliable write sector count [222:222] + UINT8 ERASE_TIMEOUT_MULT; // High-capacity erase timeout [223:223] + UINT8 HC_ERASE_GRP_SIZE; // High-capacity erase unit size [224:224] + UINT8 ACC_SIZE; // Access size [225:225] + UINT8 BOOT_SIZE_MULTI; // Boot partition size [226:226] + UINT8 RESERVED_19; // Reserved [227:227] + UINT8 BOOT_INFO; // Boot information [228:228] + UINT8 SEC_TRIM_MULT; // Secure TRIM Multiplier [229:229] + UINT8 SEC_ERASE_MULT; // Secure Erase Multiplier [230:230] + UINT8 SEC_FEATURE_SUPPORT; // Secure Feature Support [231:231] + UINT8 TRIM_MULT; // TRIM Multiplier [232:232] + UINT8 RESERVED_20; // Reserved [233:233] + UINT8 MIN_PREF_DDR_R_8_52; // Minimum read performance for 8bit at 52MHz in DDR mode [234:234] + UINT8 MIN_PREF_DDR_W_8_52; // Minimum write performance for 8bit at 52MHz in DDR mode [235:235] + UINT8 PWR_CL_200_130; // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:236] + UINT8 PWR_CL_200_195; // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237:237] + UINT8 PWR_CL_DDR_52_195; // Power class for 52MHz, DDR at 1.95V [238:238] + UINT8 PWR_CL_DDR_52_360; // Power class for 52Mhz, DDR at 3.6V [239:239] + UINT8 RESERVED_21; // Reserved [240:240] + UINT8 INI_TIMEOUT_AP; // 1st initialization time after partitioning [241:241] + UINT8 CORRECTLY_PRG_SECTORS_NUM[4]; // Number of correctly programmed sectors [245:242] + UINT8 BKOPS_STATUS; // Background operations status [246:246] + UINT8 POWER_OFF_LONG_TIME; // Power off notification (long) timeout [247:247] + UINT8 GENERIC_CMD6_TIME; // Generic CMD6 timeout [248:248] + UINT8 CACHE_SIZE[4]; // Cache size [252:249] + UINT8 PWR_CL_DDR_200_360; // Power class for 200MHz, DDR at VCC=3.6V [253:253] + UINT8 FIRMWARE_VERSION[8]; // Firmware version [261:254] + UINT8 DEVICE_VERSION[2]; // Device version [263:262] + UINT8 OPTIMAL_TRIM_UNIT_SIZE; // Optimal trim unit size [264:264] + UINT8 OPTIMAL_WRITE_SIZE; // Optimal write size [265:265] + UINT8 OPTIMAL_READ_SIZE; // Optimal read size [266:266] + UINT8 PRE_EOL_INFO; // Pre EOL information [267:267] + UINT8 DEVICE_LIFE_TIME_EST_TYP_A; // Device life time estimation type A [268:268] + UINT8 DEVICE_LIFE_TIME_EST_TYP_B; // Device life time estimation type B [269:269] + UINT8 VENDOR_PROPRIETARY_HEALTH_REPORT[32]; // Vendor proprietary health report [301:270] + UINT8 NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed [305:302] + UINT8 RESERVED_22[181]; // Reserved [486:306] + UINT8 FFU_ARG[4]; // FFU argument [490:487] + UINT8 OPERATION_CODE_TIMEOUT; // Operation codes timeout [491:491] + UINT8 FFU_FEATURES; // FFU features [492:492] + UINT8 SUPPORTED_MODES; // Supported modes [493:493] + UINT8 EXT_SUPPORT; // Extended partitions attribute support [494:494] + UINT8 LARGE_UNIT_SIZE_M1; // Large unit size [495:495] + UINT8 CONTEXT_CAPABILITIES; // Context management capabilities [496:496] + UINT8 TAG_RES_SIZE; // Tag resource size [497:497] + UINT8 TAG_UNIT_SIZE; // Tag unit size [498:498] + UINT8 DATA_TAG_SUPPORT; // Data tag support [499:499] + UINT8 MAX_PACKED_WRITES; // Max packed write commands [500:500] + UINT8 MAX_PACKED_READS; // Max packed read commands [501:501] + UINT8 BKOPS_SUPPORT; // Background operations support [502:502] + UINT8 HPI_FEATURES; // HPI features [503:503] + UINT8 S_CMD_SET; // Supported command sets [504:504] + UINT8 EXT_SECURITY_ERR; // Extended security commands error [505:505] + UINT8 RESERVED_23[6]; // Reserved [511:506] +} ECSD; + typedef struct { UINT16 RCA; CARD_TYPE CardType; OCR OCRData; CID CIDData; CSD CSDData; - UINT32 ECSD[128]; // MMC V4 extended card specific + ECSD ECSDData; // MMC V4 extended card specific } CARD_INFO; typedef struct _MMC_HOST_INSTANCE { diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c index 3531fb4..5be3d86 100644 --- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c +++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c @@ -90,7 +90,7 @@ EmmcIdentificationMode ( DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status)); } - Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSD)); + Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData)); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status)); return Status; @@ -103,7 +103,7 @@ EmmcIdentificationMode ( Media->LogicalBlocksPerPhysicalBlock = 1; Media->IoAlign = 4; // Compute last block using bits [215:212] of the ECSD - Media->LastBlock = MmcHostInstance->CardInfo.ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for + Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SEC_COUNT - 1; // eMMC isn't supposed to report this for // Cards <2GB in size, but the model does. // Setup card type