@@ -12,49 +12,8 @@
**/
-#include "ArmVExpressInternal.h"
#include <Library/ArmShellCmdLib.h>
-
-CONST EFI_GUID ArmHwA9x4Guid = { 0x2fd21cf6, 0xe6e8, 0x4ff2, { 0xa9, 0xca, 0x3b, 0x9f, 0x00, 0xe9, 0x28, 0x89 } };
-CONST EFI_GUID ArmHwA15x2A7x3Guid = { 0xd5e606eb, 0x83df, 0x4e90, { 0x81, 0xe8, 0xc3, 0xdb, 0x2f, 0x77, 0x17, 0x9a } };
-CONST EFI_GUID ArmHwA15Guid = { 0x6b8947c2, 0x4287, 0x4d91, { 0x8f, 0xe0, 0xa3, 0x81, 0xea, 0x5b, 0x56, 0x8f } };
-CONST EFI_GUID ArmHwA5Guid = { 0xa2cc7663, 0x4d7c, 0x448a, { 0xaa, 0xb5, 0x4c, 0x03, 0x4b, 0x6f, 0xda, 0xb7 } };
-CONST EFI_GUID NullGuid = { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 } };
-
-//
-// Description of the four hardware platforms :
-// just the platform id for the time being.
-// Platform ids are defined in ArmVExpressInternal.h for
-// all "ArmVExpress-like" platforms (AARCH64 or ARM architecture,
-// model or hardware platforms).
-//
-//Note: File extensions are stripped with the VExpress NOR Flash FileSystem
-CONST ARM_VEXPRESS_PLATFORM ArmVExpressPlatforms[] = {
- { ARM_HW_A9x4, &ArmHwA9x4Guid, L"ca9" },
- { ARM_HW_A15x2_A7x3, &ArmHwA15x2A7x3Guid, L"ca15a7" },
- { ARM_HW_A15, &ArmHwA15Guid, L"ca15a7" },
- { ARM_HW_A5, &ArmHwA5Guid, L"ca5s" },
- { ARM_FVP_VEXPRESS_UNKNOWN, &NullGuid, NULL }
-};
-
-/**
- Get information about the VExpress platform the firmware is running on.
-
- @param[out] Platform Address where the pointer to the platform information
- (type ARM_VEXPRESS_PLATFORM*) should be stored.
- The returned pointer does not point to an allocated
- memory area. Not used here.
-
- @retval EFI_NOT_FOUND The platform was not recognised.
-
-**/
-EFI_STATUS
-ArmVExpressGetPlatform (
- OUT CONST ARM_VEXPRESS_PLATFORM** Platform
- )
-{
- return EFI_NOT_FOUND;
-}
+#include <Library/DebugLib.h>
/**
* Generic UEFI Entrypoint for 'ArmHwDxe' driver
@@ -22,12 +22,9 @@ [Defines]
[Sources.common]
ArmHwDxe.c
- ArmVExpressCommon.c
[Packages]
- ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
[LibraryClasses]
Remove unused cruft from ArmHwDxe -- the only thing that remains is installation of the 'runaxf' shell command. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmHwDxe.c | 43 +------------------- ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmHwDxe.inf | 3 -- 2 files changed, 1 insertion(+), 45 deletions(-) -- 2.9.3 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel