From patchwork Fri Nov 10 14:21:00 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ard Biesheuvel X-Patchwork-Id: 118541 Delivered-To: patch@linaro.org Received: by 10.80.225.132 with SMTP id k4csp2258047edl; Fri, 10 Nov 2017 06:22:22 -0800 (PST) X-Google-Smtp-Source: AGs4zMaMXcvxF9RG1UOPTbCgWJRC29F30wHSAZScL+Zp3XN0+OCBSMrTn7urqr/sXeYrLxqk1mlG X-Received: by 10.99.127.4 with SMTP id a4mr497445pgd.418.1510323742346; Fri, 10 Nov 2017 06:22:22 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1510323742; cv=none; d=google.com; s=arc-20160816; b=QCypjy56Se0vip60iFfkqSp5Fkgk7FysEZSysOkg9Bbapf/+UD1UV1a2v9ucs9M0H3 Bt7BuEA03WYQbKxQyTkugLLYg8k/A1KPBKAMsNIqmFIyW/MIsay5TSWnycgkWI478Pz2 2mg+1HWfd8cODXYnXZ3nB9kApZP9nUW0dFnR+WocIaKkwZmCzSO7Iltx1o8VOEsGlpLN FnRcb4n7LN/16a6Gp7QEe0BDLz4cBfaJUhqwRpSzF+koCUpYbhxlIHZTkTZbDlESujyP WeVF/q0fVK+wI201JFdMzngINmHp3xKB7+f8riF7RDcp66KoKVx/XbE34o8AE72hzZGO d34w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:mime-version:cc :list-subscribe:list-help:list-post:list-archive:list-unsubscribe :list-id:precedence:subject:references:in-reply-to:message-id:date :to:from:dkim-signature:delivered-to:arc-authentication-results; bh=kxGhvQNJzhUQYLiQ6wasDM+JvJlp6YqBOifQrgtn7SU=; b=OSc3UIDicR8YqKvEDRz1S3nZEk5K87H8iI60Wwi7nv8VwJZ+EGa9+8hWCeJytbwOnc v+ZDWggCXhckLnVwx0/rnuOAJBQJFYH5xyGfJdJlva4wtQqXIcq4SBEbLQki5ih83pCp l7cXRnWMqXjjEqs4g8txYyQQR4AJxILYjwvATtZ9TAH4ptvRwddVDPqzcLa4jV8ki7JR rCS9/O9enha/wQOB4ah35ttwiQIWynxWp7AfWNsSIYgtNTyGS/ZYsTODpF4XNR34H7Ky m6y3YH2WVnwpiuqAV4BHu6mdL9piVMxRVfKKSIUAmKoC/aRItExp/5b5vxR3mzkcRJdx zzXQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=jW0uwY2X; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from ml01.01.org (ml01.01.org. [198.145.21.10]) by mx.google.com with ESMTPS id 26si9620286pfl.261.2017.11.10.06.22.22 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 10 Nov 2017 06:22:22 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) client-ip=198.145.21.10; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=jW0uwY2X; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 911D1203555F4; Fri, 10 Nov 2017 06:18:10 -0800 (PST) X-Original-To: edk2-devel@lists.01.org Delivered-To: edk2-devel@lists.01.org Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c0c::22c; helo=mail-wr0-x22c.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org Received: from mail-wr0-x22c.google.com (mail-wr0-x22c.google.com [IPv6:2a00:1450:400c:c0c::22c]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 30BB321B00DC5 for ; Fri, 10 Nov 2017 06:18:08 -0800 (PST) Received: by mail-wr0-x22c.google.com with SMTP id y9so8756704wrb.2 for ; Fri, 10 Nov 2017 06:22:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=GzjhBVUd4XTvoe2tdr05v+yUMA4jhEqTOMH1QCdrjxw=; b=jW0uwY2XZAfzydaDc1kgwM9xJguo0jznn3W5ilMz7YWBxcEfRL3loNxmWlLIoFlcU8 T55jp/CFqLtCOW7xTIE/q7oTt3zRlAx/itbGP0b4BOWO03ot2IiGLGMLx2u4GcIG7xR9 toHQwxzAxqM+BvuZRASupItwuYXmVDYRRlCe8= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=GzjhBVUd4XTvoe2tdr05v+yUMA4jhEqTOMH1QCdrjxw=; b=O/Qs75b1xIZD0S4MHbmHskVlq7QndlZDZfw+znzuY/pWQdVMYXZy7RUhJ5ht5L4425 1wsp9fa+WxTZkefeyO5a/x8pV0oYNEMbfmpeO/qsJYGPc0axGB26Xdyyz3atKeKpV/ln kQU3VyBoIgSTkx7vjXcRnnhUf/dCK3CWE/8LZlbu7yaK770bdZ8Tf/2u+R3uqm/HQ6S8 XlYvPMi7m/ZojfcXA4qejMDjtogLfF6G8+ZPDxde3qXVO/DJZVV8HnN4g/rosOs7yvKW mi3FB7mJNkXIQATo76iyNgjdyJTy5wXf94J6dLhxN0BUPccI9RiKq57q2ljX25H9lb8H bgPg== X-Gm-Message-State: AJaThX7oo2yVUiFVsgsPVilOrg2/mF9b7SN4EIDQxRQoRrEuk5DQZp20 wPDWhnYlX9JsaqUeNpId9xwuDh8ywMk= X-Received: by 10.223.184.125 with SMTP id u58mr476637wrf.33.1510323727521; Fri, 10 Nov 2017 06:22:07 -0800 (PST) Received: from localhost.localdomain ([160.167.170.128]) by smtp.gmail.com with ESMTPSA id e131sm1036477wmg.15.2017.11.10.06.22.04 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 10 Nov 2017 06:22:06 -0800 (PST) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org, daniel.thompson@linaro.org Date: Fri, 10 Nov 2017 14:21:00 +0000 Message-Id: <20171110142127.12018-8-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171110142127.12018-1-ard.biesheuvel@linaro.org> References: <20171110142127.12018-1-ard.biesheuvel@linaro.org> Subject: [edk2] [PATCH edk2-platforms v4 07/34] Silicon/SynQuacer: implement PciSegmentLib to support dual RCs X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: masahisa.kojima@linaro.org, masami.hiramatsu@linaro.org, Ard Biesheuvel MIME-Version: 1.0 Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" Having two distinct root complexes is not supported by the standard set of PciLib/PciExpressLib/PciSegmentLib, so let's reimplement one of the latter specifically for this platform (and forget about the others). This also allows us to implement the Synopsys Designware PCIe specific workaround for PCI config space accesses to devices 1 and up on bus 0. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegmentLib.c | 1398 ++++++++++++++++++++ Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerPciSegmentLib.inf | 35 + 2 files changed, 1433 insertions(+) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegmentLib.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegmentLib.c new file mode 100644 index 000000000000..62f3b2015d2b --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegmentLib.c @@ -0,0 +1,1398 @@ +/** @file + PCI Segment Library for SynQuacer SoC with multiple RCs + + Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.
+ Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ + This program and the accompanying materials are + licensed and made available under the terms and conditions of + the BSD License which accompanies this distribution. The full + text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include + +#include +#include +#include +#include + +#include + +typedef enum { + PciCfgWidthUint8 = 0, + PciCfgWidthUint16, + PciCfgWidthUint32, + PciCfgWidthMax +} PCI_CFG_WIDTH; + +/** + Assert the validity of a PCI Segment address. + A valid PCI Segment address should not contain 1's in bits 28..31 and 48..63 + + @param A The address to validate. + @param M Additional bits to assert to be zero. + +**/ +#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \ + ASSERT (((A) & (0xffff0000f0000000ULL | (M))) == 0) + +STATIC +UINT64 +PciSegmentLibGetConfigBase ( + IN UINT64 Address + ) +{ + switch ((UINT16)(Address >> 32)) { + case 0: + return SYNQUACER_PCI_SEG0_CONFIG_BASE; + case 1: + return SYNQUACER_PCI_SEG1_CONFIG_BASE; + default: + ASSERT (FALSE); + } + + return 0; +} + +/** + Internal worker function to read a PCI configuration register. + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param Width The width of data to read + + @return The value read from the PCI configuration register. + +**/ +STATIC +UINT32 +PciSegmentLibReadWorker ( + IN UINT64 Address, + IN PCI_CFG_WIDTH Width + ) +{ + UINT64 Base; + + Base = PciSegmentLibGetConfigBase (Address); + + // ignore devices > 0 on bus 0 + if ((Address & 0xff00000) == 0 && (Address & 0xf8000) != 0) { + return 0xffffffff; + } + + switch (Width) { + case PciCfgWidthUint8: + return MmioRead8 (Base + (UINT32)Address); + case PciCfgWidthUint16: + return MmioRead16 (Base + (UINT32)Address); + case PciCfgWidthUint32: + return MmioRead32 (Base + (UINT32)Address); + default: + ASSERT (FALSE); + } + + return 0; +} + +/** + Internal worker function to writes a PCI configuration register. + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param Width The width of data to write + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +STATIC +UINT32 +PciSegmentLibWriteWorker ( + IN UINT64 Address, + IN PCI_CFG_WIDTH Width, + IN UINT32 Data + ) +{ + UINT64 Base; + + Base = PciSegmentLibGetConfigBase (Address); + + // ignore devices > 0 on bus 0 + if ((Address & 0xff00000) == 0 && (Address & 0xf8000) != 0) { + return Data; + } + + switch (Width) { + case PciCfgWidthUint8: + MmioWrite8 (Base + (UINT32)Address, Data); + break; + case PciCfgWidthUint16: + MmioWrite16 (Base + (UINT32)Address, Data); + break; + case PciCfgWidthUint32: + MmioWrite32 (Base + (UINT32)Address, Data); + break; + default: + ASSERT (FALSE); + } + + return Data; +} + +/** + Register a PCI device so PCI configuration registers may be accessed after + SetVirtualAddressMap(). + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + + @retval RETURN_SUCCESS The PCI device was registered for runtime access. + @retval RETURN_UNSUPPORTED An attempt was made to call this function + after ExitBootServices(). + @retval RETURN_UNSUPPORTED The resources required to access the PCI device + at runtime could not be mapped. + @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to + complete the registration. + +**/ +RETURN_STATUS +EFIAPI +PciSegmentRegisterForRuntimeAccess ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + return RETURN_UNSUPPORTED; +} + +/** + Reads an 8-bit PCI configuration register. + + Reads and returns the 8-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, + and Register. + + @return The 8-bit PCI configuration register specified by Address. + +**/ +UINT8 +EFIAPI +PciSegmentRead8 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8); +} + +/** + Writes an 8-bit PCI configuration register. + + Writes the 8-bit PCI configuration register specified by Address with the value specified by Value. + Value is returned. This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentWrite8 ( + IN UINT64 Address, + IN UINT8 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Value); +} + +/** + Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by OrData, + and writes the result to the 8-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentOr8 ( + IN UINT64 Address, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) | OrData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + and writes the result to the 8-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAnd8 ( + IN UINT64 Address, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) & AndData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, + followed a bitwise OR with another 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and the value specified by OrData, + and writes the result to the 8-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAndThenOr8 ( + IN UINT64 Address, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) ((PciSegmentRead8 (Address) & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in an 8-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldRead8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 8-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldWrite8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 8-bit register. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAnd8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAndThenOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a 16-bit PCI configuration register. + + Reads and returns the 16-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + + @return The 16-bit PCI configuration register specified by Address. + +**/ +UINT16 +EFIAPI +PciSegmentRead16 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16); +} + +/** + Writes a 16-bit PCI configuration register. + + Writes the 16-bit PCI configuration register specified by Address with the value specified by Value. + Value is returned. This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT16 +EFIAPI +PciSegmentWrite16 ( + IN UINT64 Address, + IN UINT16 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Value); +} + +/** + Performs a bitwise OR of a 16-bit PCI configuration register with + a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentOr16 ( + IN UINT64 Address, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) | OrData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + and writes the result to the 16-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAnd16 ( + IN UINT64 Address, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) & AndData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, + followed a bitwise OR with another 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and the value specified by OrData, + and writes the result to the 16-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAndThenOr16 ( + IN UINT64 Address, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address) & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 16-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldRead16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 16-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldWrite16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by OrData, + and writes the result to the 16-bit PCI configuration register specified by Address. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, + and writes the result back to the bit field in the 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by OrData, + and writes the result to the 16-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param StartBit The ordinal of the least significant bit in the bit field. + The ordinal of the least significant bit in a byte is bit 0. + @param EndBit The ordinal of the most significant bit in the bit field. + The ordinal of the most significant bit in a byte is bit 7. + @param AndData The value to AND with the read value from the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAnd16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAndThenOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a 32-bit PCI configuration register. + + Reads and returns the 32-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, + and Register. + + @return The 32-bit PCI configuration register specified by Address. + +**/ +UINT32 +EFIAPI +PciSegmentRead32 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciSegmentLibReadWorker (Address, PciCfgWidthUint32); +} + +/** + Writes a 32-bit PCI configuration register. + + Writes the 32-bit PCI configuration register specified by Address with the value specified by Value. + Value is returned. This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, + Function, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT32 +EFIAPI +PciSegmentWrite32 ( + IN UINT64 Address, + IN UINT32 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value); +} + +/** + Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by OrData, + and writes the result to the 32-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentOr32 ( + IN UINT64 Address, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + and writes the result to the 32-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, + and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAnd32 ( + IN UINT64 Address, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, + followed a bitwise OR with another 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and the value specified by OrData, + and writes the result to the 32-bit PCI configuration register specified by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, Function, + and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAndThenOr32 ( + IN UINT64 Address, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData) | OrData); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 32-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldRead32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 32-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldWrite32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 32-bit register. + + + Reads the 32-bit PCI configuration register specified by Address, performs a bitwise + AND between the read result and the value specified by AndData, and writes the result + to the 32-bit PCI configuration register specified by Address. The value written to + the PCI configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in AndData are stripped. + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAnd32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAndThenOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a range of PCI configuration registers into a caller supplied buffer. + + Reads the range of PCI configuration registers specified by StartAddress and + Size into the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be read. Size is + returned. When possible 32-bit PCI configuration read cycles are used to read + from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit + and 16-bit PCI configuration read cycles may be used at the beginning and the + end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Segment, Bus, + Device, Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer receiving the data read. + + @return Size + +**/ +UINTN +EFIAPI +PciSegmentReadBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + OUT VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000); + + if (Size == 0) { + return Size; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & BIT0) != 0) { + // + // Read a byte if StartAddress is byte aligned + // + *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8*)Buffer + 1; + } + + if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) { + // + // Read a word if StartAddress is word aligned + // + WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Read as many double words as possible + // + WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress)); + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32*)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Read the last remaining word if exist + // + WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Read the last remaining byte if exist + // + *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress); + } + + return ReturnValue; +} + + +/** + Copies the data in a caller supplied buffer to a specified range of PCI + configuration space. + + Writes the range of PCI configuration registers specified by StartAddress and + Size from the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be written. Size is + returned. When possible 32-bit PCI configuration write cycles are used to + write from StartAdress to StartAddress + Size. Due to alignment restrictions, + 8-bit and 16-bit PCI configuration write cycles may be used at the beginning + and the end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Segment, Bus, + Device, Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer containing the data to write. + + @return The parameter of Size. + +**/ +UINTN +EFIAPI +PciSegmentWriteBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + IN VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000); + + if (Size == 0) { + return 0; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & BIT0) != 0) { + // + // Write a byte if StartAddress is byte aligned + // + PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8*)Buffer + 1; + } + + if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) { + // + // Write a word if StartAddress is word aligned + // + PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Write as many double words as possible + // + PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer)); + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32*)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Write the last remaining word if exist + // + PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Write the last remaining byte if exist + // + PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer); + } + + return ReturnValue; +} diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerPciSegmentLib.inf b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerPciSegmentLib.inf new file mode 100644 index 000000000000..27bfb4eb6f12 --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerPciSegmentLib.inf @@ -0,0 +1,35 @@ +## @file +# PCI Segment Library for SynQuacer SoC with multiple RCs +# +# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.
+# Copyright (c) 2017, Linaro Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php. +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +## + +[Defines] + INF_VERSION = 0x00010019 + BASE_NAME = SynQuacerPciSegmentLib + FILE_GUID = 1299f005-a30b-47d3-9003-24a91f100840 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = PciSegmentLib + +[Sources] + PciSegmentLib.c + +[Packages] + MdePkg/MdePkg.dec + Silicon/Socionext/SynQuacer/SynQuacer.dec + +[LibraryClasses] + BaseLib + DebugLib + IoLib