new file mode 100644
@@ -0,0 +1,461 @@
+/** @file
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "FdtPlatform.h"
+
+#include <Library/PcdLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/BdsLib.h>
+
+#include <Protocol/DevicePath.h>
+
+//
+// Internal variables
+//
+
+STATIC CONST EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL mShellDynCmdProtocolSetFdt = {
+ L"setfdt", // Name of the command
+ ShellDynCmdSetFdtHandler, // Handler
+ ShellDynCmdSetFdtGetHelp // GetHelp
+};
+
+STATIC CONST EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL mShellDynCmdProtocolDumpFdt = {
+ L"dumpfdt", // Name of the command
+ ShellDynCmdDumpFdtHandler, // Handler
+ ShellDynCmdDumpFdtGetHelp // GetHelp
+};
+
+STATIC CONST EFI_GUID mFdtPlatformDxeHiiGuid = {
+ 0x8afa7610, 0x62b1, 0x46aa,
+ {0xb5, 0x34, 0xc3, 0xde, 0xff, 0x39, 0x77, 0x8c}
+ };
+
+EFI_HANDLE mFdtPlatformDxeHiiHandle;
+
+/**
+ Install the FDT specified by its device path in text form.
+
+ @param[in] TextDevicePath Device path of the FDT to install in text form
+
+ @retval EFI_SUCCESS The FDT was installed.
+ @retval EFI_NOT_FOUND Failed to locate a protocol or a file.
+ @retval EFI_INVALID_PARAMETER Invalid device path.
+ @retval EFI_UNSUPPORTED Device path not supported.
+ @retval EFI_OUT_OF_RESOURCES An allocation failed.
+**/
+STATIC
+EFI_STATUS
+InstallFdt (
+ IN CONST CHAR16* TextDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL *EfiDevicePathFromTextProtocol;
+ EFI_DEVICE_PATH *DevicePath;
+ EFI_PHYSICAL_ADDRESS FdtBlobBase;
+ UINTN FdtBlobSize;
+ UINTN NumPages;
+ EFI_PHYSICAL_ADDRESS FdtConfigurationTableBase;
+
+ Status = gBS->LocateProtocol (
+ &gEfiDevicePathFromTextProtocolGuid,
+ NULL,
+ (VOID **)&EfiDevicePathFromTextProtocol
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "InstallFdt() - Failed to locate EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL protocol\n"));
+ return Status;
+ }
+
+ DevicePath = (EFI_DEVICE_PATH*)EfiDevicePathFromTextProtocol->ConvertTextToDevicePath (TextDevicePath);
+ if (DevicePath == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Load the FDT given its device path.
+ // This operation may fail if the device path is not supported.
+ //
+ FdtBlobBase = 0;
+ NumPages = 0;
+ Status = BdsLoadImage (DevicePath, AllocateAnyPages, &FdtBlobBase, &FdtBlobSize);
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ //
+ // Ensure that the FDT header is valid and that the Size of the Device Tree
+ // is smaller than the size of the read file
+ //
+ if (fdt_check_header ((VOID*)(UINTN)FdtBlobBase) != 0 ||
+ (UINTN)fdt_totalsize ((VOID*)(UINTN)FdtBlobBase) > FdtBlobSize) {
+ DEBUG ((EFI_D_ERROR, "InstallFdt() - loaded FDT binary image seems corrupt\n"));
+ Status = EFI_LOAD_ERROR;
+ goto Error;
+ }
+
+ //
+ // Store the FDT as Runtime Service Data to prevent the Kernel from
+ // overwritting its data.
+ //
+ NumPages = EFI_SIZE_TO_PAGES (FdtBlobSize);
+ Status = gBS->AllocatePages (
+ AllocateAnyPages, EfiRuntimeServicesData,
+ NumPages, &FdtConfigurationTableBase
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+ CopyMem (
+ (VOID*)(UINTN)FdtConfigurationTableBase,
+ (VOID*)(UINTN)FdtBlobBase,
+ FdtBlobSize
+ );
+
+ //
+ // Install the FDT into the Configuration Table
+ //
+ Status = gBS->InstallConfigurationTable (
+ &gFdtTableGuid,
+ (VOID*)(UINTN)FdtConfigurationTableBase
+ );
+ if (EFI_ERROR (Status)) {
+ gBS->FreePages (FdtConfigurationTableBase, NumPages);
+ }
+
+Error:
+ if (FdtBlobBase != 0) {
+ gBS->FreePages (FdtBlobBase, NumPages);
+ }
+ FreePool (DevicePath);
+
+ return Status;
+}
+
+/**
+ Main entry point of the FDT platform driver.
+
+ @param[in] ImageHandle The firmware allocated handle for the present driver
+ UEFI image.
+ @param[in] *SystemTable A pointer to the EFI System table.
+
+ @retval EFI_SUCCESS The driver was initialized.
+ @retval EFI_OUT_OF_RESOURCES The "End of DXE" event could not be allocated or
+ there was not enough memory in pool to install
+ the Shell Dynamic Command protocol.
+ @retval EFI_LOAD_ERROR Unable to add the HII package.
+
+**/
+EFI_STATUS
+FdtPlatformEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ //
+ // Install the Device Tree from its expected location
+ //
+ Status = RunFdtInstallation (NULL);
+
+ if (FeaturePcdGet (PcdOverridePlatformFdt) || FeaturePcdGet (PcdDumpFdtShellCommand)) {
+ //
+ // Register the strings for the user interface in the HII Database.
+ // This shows the way to the multi-language support, even if
+ // only the English language is actually supported. The strings to register
+ // are stored in the "ShellSetFdtStrings[]" array. This array is
+ // built by the building process from the "*.uni" file associated to
+ // the present driver (cf. FdtPlatfromDxe.inf). Examine your Build
+ // folder under your package's DEBUG folder and you will find the array
+ // defined in a xxxStrDefs.h file.
+ //
+ mFdtPlatformDxeHiiHandle = HiiAddPackages (
+ &mFdtPlatformDxeHiiGuid,
+ ImageHandle,
+ FdtPlatformDxeStrings,
+ NULL
+ );
+ }
+
+ //
+ // If the development features are enabled, install the dynamic shell
+ // command "setfdt" to be able to define a device path for the FDT
+ // that has precedence over the device paths defined by
+ // "PcdFdtDevicePaths".
+ //
+
+ if (FeaturePcdGet (PcdOverridePlatformFdt)) {
+ if (mFdtPlatformDxeHiiHandle != NULL) {
+ // We install dynamic EFI command on separate handles as we cannot register
+ // more than one protocol of the same protocol interface on the same handle.
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEfiShellDynamicCommandProtocolGuid,
+ &mShellDynCmdProtocolSetFdt,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ HiiRemovePackages (mFdtPlatformDxeHiiHandle);
+ }
+ } else {
+ Status = EFI_LOAD_ERROR;
+ }
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ EFI_D_WARN,
+ "Unable to install \"setfdt\" EFI Shell command - %r \n",
+ Status
+ ));
+ }
+ }
+
+ if (FeaturePcdGet (PcdDumpFdtShellCommand)) {
+ if (mFdtPlatformDxeHiiHandle != NULL) {
+ // We install dynamic EFI command on separate handles as we cannot register
+ // more than one protocol of the same protocol interface on the same handle.
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEfiShellDynamicCommandProtocolGuid,
+ &mShellDynCmdProtocolDumpFdt,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ HiiRemovePackages (mFdtPlatformDxeHiiHandle);
+ }
+ } else {
+ Status = EFI_LOAD_ERROR;
+ }
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ EFI_D_WARN,
+ "Unable to install \"dumpfdt\" EFI Shell command - %r \n",
+ Status
+ ));
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Run the FDT installation process.
+
+ Loop in priority order over the device paths from which the FDT has
+ been asked to be retrieved for. For each device path, try to install
+ the FDT. Stop as soon as an installation succeeds.
+
+ @param[in] SuccessfullDevicePath If not NULL, address where to store the
+ pointer to the text device path from
+ which the FDT was successfully retrieved.
+ Not used if the FDT installation failed.
+ The returned address is the address of
+ an allocated buffer that has to be
+ freed by the caller.
+
+ @retval EFI_SUCCESS The FDT was installed.
+ @retval EFI_NOT_FOUND Failed to locate a protocol or a file.
+ @retval EFI_INVALID_PARAMETER Invalid device path.
+ @retval EFI_UNSUPPORTED Device path not supported.
+ @retval EFI_OUT_OF_RESOURCES An allocation failed.
+
+**/
+EFI_STATUS
+RunFdtInstallation (
+ OUT CHAR16 **SuccessfullDevicePath
+ )
+{
+ EFI_STATUS Status;
+ UINTN DataSize;
+ CHAR16 *TextDevicePath;
+ CHAR16 *TextDevicePathStart;
+ CHAR16 *TextDevicePathSeparator;
+ UINTN TextDevicePathLen;
+
+ TextDevicePath = NULL;
+ //
+ // For development purpose, if enabled through the "PcdOverridePlatformFdt"
+ // feature PCD, try first to install the FDT specified by the device path in
+ // text form stored in the "Fdt" UEFI variable.
+ //
+ if (FeaturePcdGet (PcdOverridePlatformFdt)) {
+ DataSize = 0;
+ Status = gRT->GetVariable (
+ L"Fdt",
+ &gFdtVariableGuid,
+ NULL,
+ &DataSize,
+ NULL
+ );
+
+ //
+ // Keep going only if the "Fdt" variable is defined.
+ //
+
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ TextDevicePath = AllocatePool (DataSize);
+ if (TextDevicePath == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error;
+ }
+
+ Status = gRT->GetVariable (
+ L"Fdt",
+ &gFdtVariableGuid,
+ NULL,
+ &DataSize,
+ TextDevicePath
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool (TextDevicePath);
+ goto Error;
+ }
+
+ Status = InstallFdt (TextDevicePath);
+ if (!EFI_ERROR (Status)) {
+ DEBUG ((
+ EFI_D_WARN,
+ "Installation of the FDT using the device path <%s> completed.\n",
+ TextDevicePath
+ ));
+ goto Done;
+ }
+ DEBUG ((
+ EFI_D_ERROR,
+ "Installation of the FDT specified by the \"Fdt\" UEFI variable failed - %r\n",
+ Status
+ ));
+ FreePool (TextDevicePath);
+ }
+ }
+
+ //
+ // Loop over the device path list provided by "PcdFdtDevicePaths". The device
+ // paths are in text form and separated by a semi-colon.
+ //
+
+ Status = EFI_NOT_FOUND;
+ for (TextDevicePathStart = (CHAR16*)PcdGetPtr (PcdFdtDevicePaths);
+ *TextDevicePathStart != L'\0' ; ) {
+ TextDevicePathSeparator = StrStr (TextDevicePathStart, L";");
+
+ //
+ // Last device path of the list
+ //
+ if (TextDevicePathSeparator == NULL) {
+ TextDevicePathLen = StrLen (TextDevicePathStart);
+ } else {
+ TextDevicePathLen = (UINTN)(TextDevicePathSeparator - TextDevicePathStart);
+ }
+
+ TextDevicePath = AllocateCopyPool (
+ (TextDevicePathLen + 1) * sizeof (CHAR16),
+ TextDevicePathStart
+ );
+ if (TextDevicePath == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error;
+ }
+ TextDevicePath[TextDevicePathLen] = L'\0';
+
+ Status = InstallFdt (TextDevicePath);
+ if (!EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_WARN, "Installation of the FDT using the device path <%s> completed.\n",
+ TextDevicePath
+ ));
+ goto Done;
+ }
+
+ DEBUG ((EFI_D_WARN, "Installation of the FDT using the device path <%s> failed - %r.\n",
+ TextDevicePath, Status
+ ));
+ FreePool (TextDevicePath);
+
+ if (TextDevicePathSeparator == NULL) {
+ goto Error;
+ }
+ TextDevicePathStart = TextDevicePathSeparator + 1;
+ }
+
+Error:
+Done:
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Failed to install the FDT - %r.\n", Status));
+ return Status;
+ }
+
+ if (SuccessfullDevicePath != NULL) {
+ *SuccessfullDevicePath = TextDevicePath;
+ } else {
+ FreePool (TextDevicePath);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Transcode one of the EFI return code used by the model into an EFI Shell return code.
+
+ @param[in] Status EFI return code.
+
+ @return Transcoded EFI Shell return code.
+
+**/
+SHELL_STATUS
+EfiCodeToShellCode (
+ IN EFI_STATUS Status
+ )
+{
+ SHELL_STATUS ShellStatus;
+
+ switch (Status) {
+ case EFI_SUCCESS :
+ ShellStatus = SHELL_SUCCESS;
+ break;
+
+ case EFI_INVALID_PARAMETER :
+ ShellStatus = SHELL_INVALID_PARAMETER;
+ break;
+
+ case EFI_UNSUPPORTED :
+ ShellStatus = SHELL_UNSUPPORTED;
+ break;
+
+ case EFI_DEVICE_ERROR :
+ ShellStatus = SHELL_DEVICE_ERROR;
+ break;
+
+ case EFI_WRITE_PROTECTED :
+ case EFI_SECURITY_VIOLATION :
+ ShellStatus = SHELL_ACCESS_DENIED;
+ break;
+
+ case EFI_OUT_OF_RESOURCES :
+ ShellStatus = SHELL_OUT_OF_RESOURCES;
+ break;
+
+ case EFI_NOT_FOUND :
+ ShellStatus = SHELL_NOT_FOUND;
+ break;
+
+ default :
+ ShellStatus = SHELL_ABORTED;
+ }
+
+ return ShellStatus;
+}
new file mode 100644
@@ -0,0 +1,174 @@
+/** @file
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __FDT_PLATFORM_DXE_H__
+#define __FDT_PLATFORM_DXE_H__
+
+#include <Uefi.h>
+
+#include <Protocol/DevicePathToText.h>
+#include <Protocol/DevicePathFromText.h>
+#include <Protocol/Shell.h>
+#include <Protocol/ShellDynamicCommand.h>
+
+#include <Library/DebugLib.h>
+#include <Library/HiiLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/ShellLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+#include <Guid/Fdt.h>
+
+#include <libfdt.h>
+
+extern EFI_HANDLE mFdtPlatformDxeHiiHandle;
+
+/**
+ Transcode one of the EFI return code used by the model into an EFI Shell return code.
+
+ @param[in] Status EFI return code.
+
+ @return Transcoded EFI Shell return code.
+
+**/
+SHELL_STATUS
+EfiCodeToShellCode (
+ IN EFI_STATUS Status
+ );
+
+/**
+ Run the FDT installation process.
+
+ Loop in priority order over the device paths from which the FDT has
+ been asked to be retrieved for. For each device path, try to install
+ the FDT. Stop as soon as an installation succeeds.
+
+ @param[in] SuccessfullDevicePath If not NULL, address where to store the
+ pointer to the text device path from
+ which the FDT was successfully retrieved.
+ Not used if the FDT installation failed.
+ The returned address is the address of
+ an allocated buffer that has to be
+ freed by the caller.
+
+ @retval EFI_SUCCESS The FDT was installed.
+ @retval EFI_NOT_FOUND Failed to locate a protocol or a file.
+ @retval EFI_INVALID_PARAMETER Invalid device path.
+ @retval EFI_UNSUPPORTED Device path not supported.
+ @retval EFI_OUT_OF_RESOURCES An allocation failed.
+
+**/
+EFI_STATUS
+RunFdtInstallation (
+ OUT CHAR16 **SuccessfullDevicePath
+ );
+
+/**
+ This is the shell command "setfdt" handler function. This function handles
+ the command when it is invoked in the shell.
+
+ @param[in] This The instance of the
+ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] SystemTable The pointer to the UEFI system table.
+ @param[in] ShellParameters The parameters associated with the command.
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing this command.
+
+ @return SHELL_SUCCESS The operation was successful.
+ @return SHELL_ABORTED Operation aborted due to internal error.
+ @return SHELL_INVALID_PARAMETER The parameters of the command are not valid.
+ @return SHELL_INVALID_PARAMETER The EFI Shell file path is not valid.
+ @return SHELL_NOT_FOUND Failed to locate a protocol or a file.
+ @return SHELL_UNSUPPORTED Device path not supported.
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+ @return SHELL_DEVICE_ERROR The "Fdt" variable could not be saved due to a hardware failure.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable is read-only.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable cannot be deleted.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable could not be written due to security violation.
+
+**/
+SHELL_STATUS
+EFIAPI
+ShellDynCmdSetFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ );
+
+/**
+ This is the shell command "setfdt" help handler function. This
+ function returns the formatted help for the "setfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdSetFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ );
+
+/**
+ This is the shell command "dumpfdt" handler function. This function handles
+ the command when it is invoked in the shell.
+
+ @param[in] This The instance of the
+ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] SystemTable The pointer to the UEFI system table.
+ @param[in] ShellParameters The parameters associated with the command.
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing this command.
+
+ @return SHELL_SUCCESS The operation was successful.
+ @return SHELL_ABORTED Operation aborted due to internal error.
+ @return SHELL_NOT_FOUND Failed to locate the Device Tree into the EFI Configuration Table
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+
+**/
+SHELL_STATUS
+EFIAPI
+ShellDynCmdDumpFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ );
+
+/**
+ This is the shell command "dumpfdt" help handler function. This
+ function returns the formatted help for the "dumpfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdDumpFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ );
+
+#endif /* __FDT_PLATFORM_DXE_H__ */
new file mode 100644
@@ -0,0 +1,31 @@
+#/** @file
+#
+# Copyright (c) 2011-2017, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001A
+ PACKAGE_NAME = FdtPlatformDxe
+ PACKAGE_GUID = ed22c1e5-71cb-48d6-a9d8-c20f8d6b909f
+ PACKAGE_VERSION = 0.1
+
+[Guids]
+ gFdtPlatformDxeTokenSpaceGuid = { 0xbfcaa0af, 0xedd4, 0x4ce7, { 0xbd, 0xb3, 0x39, 0x15, 0x07, 0x28, 0x65, 0x77 } }
+
+[PcdsFeatureFlag.common]
+ # Enable the development specific features
+ gFdtPlatformDxeTokenSpaceGuid.PcdOverridePlatformFdt|TRUE|BOOLEAN|0x00000001
+ # Add 'dumpfdt' EFI Shell command
+ gFdtPlatformDxeTokenSpaceGuid.PcdDumpFdtShellCommand|TRUE|BOOLEAN|0x00000002
+
+[PcdsFixedAtBuild.common, PcdsDynamic.common]
+ gFdtPlatformDxeTokenSpaceGuid.PcdFdtDevicePaths|L""|VOID*|0x00000055
new file mode 100644
@@ -0,0 +1,65 @@
+#/** @file
+#
+# Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010006
+ BASE_NAME = FdtPlatformDxe
+ MODULE_UNI_FILE = FdtPlatformDxe.uni
+ FILE_GUID = 4bd726b2-d1c8-4e98-ba08-2bc2ab251daf
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 0.1
+ ENTRY_POINT = FdtPlatformEntryPoint
+
+[Sources.common]
+ FdtPlatform.c
+ FdtPlatformDxe.uni
+ ShellDumpFdt.c
+ ShellSetFdt.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatformDxe.dec
+ ShellPkg/ShellPkg.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ BdsLib
+ DebugLib
+ DxeServicesTableLib
+ FdtLib
+ HiiLib
+ ShellLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiRuntimeServicesTableLib
+
+[Protocols]
+ gEfiDevicePathFromTextProtocolGuid
+ gEfiDevicePathToTextProtocolGuid
+ gEfiShellDynamicCommandProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+ gFdtTableGuid
+ gFdtVariableGuid
+
+[FeaturePcd]
+ gFdtPlatformDxeTokenSpaceGuid.PcdDumpFdtShellCommand
+ gFdtPlatformDxeTokenSpaceGuid.PcdOverridePlatformFdt
+
+[Pcd]
+ gFdtPlatformDxeTokenSpaceGuid.PcdFdtDevicePaths
new file mode 100644
@@ -0,0 +1,109 @@
+// *++
+//
+// Copyright (c) 2014, ARM Ltd. All rights reserved.<BR>
+//
+// This program and the accompanying materials are licensed and made available
+// under the terms and conditions of the BSD License which accompanies this
+// distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+//
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+//
+// Module Name:
+//
+// FdtPlatformDxe
+//
+// Abstract:
+//
+// String definitions for the EFI Shell 'setfdt' command
+//
+// Revision History:
+//
+// --*/
+
+/=#
+
+#langdef en-US "English"
+
+#string STR_SETFDT_INSTALLING #language en-US "Installing the FDT ...\r\n"
+#string STR_SETFDT_INSTALL_SUCCEEDED #language en-US "Installation of\r\n'%s'\r\ncompleted.\r\n"
+
+#string STR_SETFDT_UPDATING #language en-US "Updating the FDT device path ...\r\n"
+#string STR_SETFDT_UPDATE_SUCCEEDED #language en-US "Update of the FDT device path '%s' completed.\r\n"
+#string STR_SETFDT_UPDATE_DELETED #language en-US "The UEFI variable "Fdt" was deleted.\r\n"
+
+#string STR_SETFDT_INVALID_DEVICE_PATH #language en-US "Invalid device path.\r\n"
+#string STR_SETFDT_INVALID_PATH #language en-US "The EFI Shell or device file path '%s' is invalid.\r\n"
+#string STR_SETFDT_ERROR #language en-US "Error - %r.\r\n"
+#string STR_SETFDT_DEVICE_PATH_LIST #language en-US "FDT device paths :\r\n"
+#string STR_SETFDT_DEVICE_PATH #language en-US "'%s'\r\n"
+
+#string STR_GET_HELP_SETFDT #language en-US ""
+".TH setfdt 0 "Define and/or install a new Flat Device Tree (FDT) for the platform."\r\n"
+".SH NAME\r\n"
+"Define and/or re-install a Flat Device Tree (FDT)\r\n"
+".SH SYNOPSIS\r\n"
+"setfdt [-i] [fdt_path]\r\n"
+".SH OPTIONS\r\n"
+"-i run the FDT installation process\r\n"
+"file_path EFI Shell file path or device path to a FDT\r\n"
+"\r\n"
+".SH DESCRIPTION\r\n"
+"NOTES:\r\n"
+"1. If a valid EFI Shell file path is passed to the command, then the\r\n"
+" command translates the EFI Shell file path into a device path in the\r\n"
+" text form and saves it in the non volatile UEFI variable "Fdt". If\r\n"
+" the path to the FDT is a device path in the text form, it is saved as\r\n"
+" it is in the non volatile UEFI variable "Fdt". The next time the FDT\r\n"
+" installation process is run, it will first try to install the FDT from\r\n"
+" the device path specified by the UEFI variable "Fdt".\r\n"
+" \r\n
+"2. If the option -i is passed to the command, then the FDT installation\r\n"
+" process is run. If a path to the FDT is passed to the command as well,\r\n"
+" the update of the "Fdt" UEFI variable is done first before to launch\r\n"
+" the FDT installation process.\r\n"
+" \r\n
+".SH RETURNVALUES\r\n"
+"SHELL_SUCCESS Operation(s) completed.\r\n"
+"SHELL_ABORTED Operation aborted.\r\n"
+"SHELL_INVALID_PARAMETER Invalid argument(s).\r\n"
+"SHELL_NOT_FOUND Failed to locate a protocol or a file.\r\n"
+"SHELL_UNSUPPORTED Device path not supported.\r\n"
+"SHELL_OUT_OF_RESOURCES A memory allocation failed.\r\n"
+"SHELL_DEVICE ERROR Hardware failure.\r\n"
+"SHELL_ACCESS_DENIED Access to the Fdt UEFI variable for modification denied.\r\n"
+".SH EXAMPLES\r\n"
+"EXAMPLES:\r\n"
+"1. Relaunch the FDT installation process :\r\n"
+" Shell> setfdt -i\r\n"
+" \r\n"
+"2. Set the EFI Shell file path 'fs0:\>fdt.dtb' to be the default path\r\n"
+" to the FDT :\r\n"
+" Shell> setfdt fs0:fdt.dtb\r\n"
+" \r\n"
+"3. Set a TFTP device path to be the default path to the FDT :\r\n"
+" Shell> setfdt MAC(0002f700570b,0x1)/IPv4(192.168.1.1)/fdt.dtb\r\n"
+" where . 00:02:f7:00:57:0b is the MAC address of the network\r\n"
+" interface card to be used. The 'ifconfig -l' EFI Shell\r\n"
+" command allows to get the MAC address of the network\r\n"
+" interface cards.\r\n"
+" . 192.168.1.1 is the address of the TFTP server.\r\n"
+" . fdt.dtb is the file path to the FDT file on the server.\r\n"
+"4. Display the FDT device paths from the highest to the lowest\r\n"
+" priority :\r\n"
+" Shell> setfdt\r\n"
+"5. Delete the "Fdt" UEFI variable :\r\n"
+" Shell> setfdt ""\r\n"
+"\r\n"
+
+#string STR_GET_HELP_DUMPFDT #language en-US ""
+".TH dumpfdt 0 "Dump installed Flat Device Tree (FDT) of the platform."\r\n"
+".SH NAME\r\n"
+"Dump current Flat Device Tree (FDT)\r\n"
+".SH SYNOPSIS\r\n"
+"dumpfdt\r\n"
+"\r\n"
+".SH DESCRIPTION\r\n"
+"\r\n"
new file mode 100644
@@ -0,0 +1,72 @@
+/** @file
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+The purpose of the FdtPlatformDxe UEFI driver is to install the Flat Device
+Tree (FDT) of the platform the UEFI frimware is running on into the UEFI
+Configuration Table. The FDT is identified within the UEFI Configuration
+Table by the "gFdtTableGuid" GUID defined in "EmbeddedPkg.dec".
+
+Once installed, an UEFI application or OS boot loader can get from the UEFI
+Configuration Table the FDT of the platform from the "gFdtTableGuid" GUID.
+
+The installation is done after each boot at the end of the DXE phase,
+just before the BDS phase. It is done at the end of the DXE phase to be sure
+that all drivers have been dispatched. That way, all UEFI protocols that may
+be needed to retrieve the FDT can be made available. It is done before the BDS
+phase to be able to provide the FDT during that phase.
+
+The present driver tries to retrieve the FDT from the device paths defined in the
+"gFdtPlatformDxeTokenSpaceGuid.PcdFdtDevicePaths" PCD. The "PcdFdtDevicePaths"
+PCD contains a list a device paths. The device paths are in the text form and
+separated by semi-colons. The present driver tries the device paths in the order
+it finds them in the "PcdFdtDevicePaths" PCD as long as he did not install
+succesfully a FDT.
+
+The "PcdFdtDevicePaths" PCD is a dynamic PCD that can be modified during the
+DXE phase. This allows for exemple to select the right FDT when a binary is
+intended to run on several platforms and/or variants of a platform.
+
+If the driver manages to download a FDT from one of the device paths mentioned
+above then it installs it in the UEFI Configuration table and the run over the
+device paths is stopped.
+
+For development purposes only, if the feature PCD "gFdtPlatformDxeTokenSpaceGuid.
+PcdOverridePlatformFdt" is equal to TRUE, then before to try to install the
+FDT from the device paths listed in the "PcdFdtDevicePaths" PCD, the present
+driver tries to install it using the device path defined by the UEFI variable
+"Fdt". If the variable does not exist or the installation using the device path
+defined by the UEFI variable fails then the installation proceeds as described
+above.
+
+Furthermore and again for development purposes only, if the feature PCD
+"PcdOverridePlatformFdt" is equal to TRUE, the current driver provides the EFI
+Shell command "setfdt" to define the location of the FDT by the mean of an EFI
+Shell file path (like "fs2:\boot\fdt.dtb") or a device path.
+
+If the path passed in to the command is a valid EFI Shell file path, the
+command translates it into the corresponding device path and stores that
+device path in the "Fdt" UEFI variable asking for the variable to be non
+volatile.
+
+If the path passed in to the command is not recognised as a valid EFI
+Shell device path, the command handles it as device path and stored
+in the "Fdt" UEFI variable as it is.
+
+Finally, the "-i" option of the "setfdt" command allows to trigger the FDT
+installation process. The installation process is completed when the command
+returns. The command can be invoked with the "-i" option only and in that
+case the "Fdt" UEFI variable is not updated and the command just runs the
+FDT installation process. If the command is invoked with the "-i" option and
+an EFI Shell file path then first the "Fdt" UEFI variable is updated accordingly
+and then the FDT installation process is run.
new file mode 100644
@@ -0,0 +1,279 @@
+/** @file
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "FdtPlatform.h"
+
+#define ALIGN(x, a) (((x) + ((a) - 1)) & ~((a) - 1))
+#define PALIGN(p, a) ((void *)(ALIGN ((unsigned long)(p), (a))))
+#define GET_CELL(p) (p += 4, *((const uint32_t *)(p-4)))
+
+STATIC
+UINTN
+IsPrintableString (
+ IN CONST VOID* data,
+ IN UINTN len
+ )
+{
+ CONST CHAR8 *s = data;
+ CONST CHAR8 *ss;
+
+ // Zero length is not
+ if (len == 0) {
+ return 0;
+ }
+
+ // Must terminate with zero
+ if (s[len - 1] != '\0') {
+ return 0;
+ }
+
+ ss = s;
+ while (*s/* && isprint (*s)*/) {
+ s++;
+ }
+
+ // Not zero, or not done yet
+ if (*s != '\0' || (s + 1 - ss) < len) {
+ return 0;
+ }
+
+ return 1;
+}
+
+STATIC
+VOID
+PrintData (
+ IN CONST CHAR8* data,
+ IN UINTN len
+ )
+{
+ UINTN i;
+ CONST CHAR8 *p = data;
+
+ // No data, don't print
+ if (len == 0)
+ return;
+
+ if (IsPrintableString (data, len)) {
+ Print (L" = \"%a\"", (const char *)data);
+ } else if ((len % 4) == 0) {
+ Print (L" = <");
+ for (i = 0; i < len; i += 4) {
+ Print (L"0x%08x%a", fdt32_to_cpu (GET_CELL (p)), i < (len - 4) ? " " : "");
+ }
+ Print (L">");
+ } else {
+ Print (L" = [");
+ for (i = 0; i < len; i++)
+ Print (L"%02x%a", *p++, i < len - 1 ? " " : "");
+ Print (L"]");
+ }
+}
+
+STATIC
+VOID
+DumpFdt (
+ IN VOID* FdtBlob
+ )
+{
+ struct fdt_header *bph;
+ UINT32 off_dt;
+ UINT32 off_str;
+ CONST CHAR8* p_struct;
+ CONST CHAR8* p_strings;
+ CONST CHAR8* p;
+ CONST CHAR8* s;
+ CONST CHAR8* t;
+ UINT32 tag;
+ UINTN sz;
+ UINTN depth;
+ UINTN shift;
+ UINT32 version;
+
+ {
+ // Can 'memreserve' be printed by below code?
+ INTN num = fdt_num_mem_rsv (FdtBlob);
+ INTN i, err;
+ UINT64 addr = 0, size = 0;
+
+ for (i = 0; i < num; i++) {
+ err = fdt_get_mem_rsv (FdtBlob, i, &addr, &size);
+ if (err) {
+ DEBUG ((EFI_D_ERROR, "Error (%d) : Cannot get memreserve section (%d)\n", err, i));
+ }
+ else {
+ Print (L"/memreserve/ \t0x%lx \t0x%lx;\n", addr, size);
+ }
+ }
+ }
+
+ depth = 0;
+ shift = 4;
+
+ bph = FdtBlob;
+ off_dt = fdt32_to_cpu (bph->off_dt_struct);
+ off_str = fdt32_to_cpu (bph->off_dt_strings);
+ p_struct = (CONST CHAR8*)FdtBlob + off_dt;
+ p_strings = (CONST CHAR8*)FdtBlob + off_str;
+ version = fdt32_to_cpu (bph->version);
+
+ p = p_struct;
+ while ((tag = fdt32_to_cpu (GET_CELL (p))) != FDT_END) {
+ if (tag == FDT_BEGIN_NODE) {
+ s = p;
+ p = PALIGN (p + AsciiStrLen (s) + 1, 4);
+
+ if (*s == '\0')
+ s = "/";
+
+ Print (L"%*s%a {\n", depth * shift, L" ", s);
+
+ depth++;
+ continue;
+ }
+
+ if (tag == FDT_END_NODE) {
+ depth--;
+
+ Print (L"%*s};\n", depth * shift, L" ");
+ continue;
+ }
+
+ if (tag == FDT_NOP) {
+ Print (L"%*s// [NOP]\n", depth * shift, L" ");
+ continue;
+ }
+
+ if (tag != FDT_PROP) {
+ Print (L"%*s ** Unknown tag 0x%08x\n", depth * shift, L" ", tag);
+ break;
+ }
+ sz = fdt32_to_cpu (GET_CELL (p));
+ s = p_strings + fdt32_to_cpu (GET_CELL (p));
+ if (version < 16 && sz >= 8)
+ p = PALIGN (p, 8);
+ t = p;
+
+ p = PALIGN (p + sz, 4);
+
+ Print (L"%*s%a", depth * shift, L" ", s);
+ PrintData (t, sz);
+ Print (L";\n");
+ }
+}
+
+/**
+ This is the shell command "dumpfdt" handler function. This function handles
+ the command when it is invoked in the shell.
+
+ @param[in] This The instance of the
+ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] SystemTable The pointer to the UEFI system table.
+ @param[in] ShellParameters The parameters associated with the command.
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing this command.
+
+ @return SHELL_SUCCESS The operation was successful.
+ @return SHELL_ABORTED Operation aborted due to internal error.
+ @return SHELL_NOT_FOUND Failed to locate the Device Tree into the EFI Configuration Table
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+
+**/
+SHELL_STATUS
+EFIAPI
+ShellDynCmdDumpFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ )
+{
+ SHELL_STATUS ShellStatus;
+ EFI_STATUS Status;
+ VOID *FdtBlob;
+
+ ShellStatus = SHELL_SUCCESS;
+
+ //
+ // Install the Shell and Shell Parameters Protocols on the driver
+ // image. This is necessary for the initialisation of the Shell
+ // Library to succeed in the next step.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ return SHELL_ABORTED;
+ }
+
+ //
+ // Initialise the Shell Library as we are going to use it.
+ // Assert that the return code is EFI_SUCCESS as it should.
+ // To anticipate any change is the codes returned by
+ // ShellInitialize(), leave in case of error.
+ //
+ Status = ShellInitialize ();
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ return SHELL_ABORTED;
+ }
+
+ Status = EfiGetSystemConfigurationTable (&gFdtTableGuid, &FdtBlob);
+ if (EFI_ERROR (Status)) {
+ Print (L"ERROR: Did not find the Fdt Blob.\n");
+ return EfiCodeToShellCode (Status);
+ }
+
+ DumpFdt (FdtBlob);
+
+ gBS->UninstallMultipleProtocolInterfaces (
+ gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+
+ return ShellStatus;
+}
+
+/**
+ This is the shell command "dumpfdt" help handler function. This
+ function returns the formatted help for the "dumpfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdDumpFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ )
+{
+ //
+ // This allocates memory. The caller has to free the allocated memory.
+ //
+ return HiiGetString (
+ mFdtPlatformDxeHiiHandle,
+ STRING_TOKEN (STR_GET_HELP_DUMPFDT),
+ Language
+ );
+}
new file mode 100644
@@ -0,0 +1,468 @@
+/** @file
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "FdtPlatform.h"
+
+STATIC CONST SHELL_PARAM_ITEM ParamList[] = {
+ {L"-i", TypeFlag },
+ {NULL , TypeMax }
+};
+
+/**
+ Display FDT device paths.
+
+ Display in text form the device paths used to install the FDT from the
+ highest to the lowest priority.
+
+**/
+STATIC
+VOID
+DisplayFdtDevicePaths (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINTN DataSize;
+ CHAR16 *TextDevicePath;
+ CHAR16 *TextDevicePaths;
+ CHAR16 *TextDevicePathSeparator;
+
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_DEVICE_PATH_LIST),
+ mFdtPlatformDxeHiiHandle
+ );
+
+ if (FeaturePcdGet (PcdOverridePlatformFdt)) {
+ DataSize = 0;
+ Status = gRT->GetVariable (
+ L"Fdt",
+ &gFdtVariableGuid,
+ NULL,
+ &DataSize,
+ NULL
+ );
+
+ //
+ // Keep going only if the "Fdt" variable is defined.
+ //
+
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ TextDevicePath = AllocatePool (DataSize);
+ if (TextDevicePath == NULL) {
+ return;
+ }
+
+ Status = gRT->GetVariable (
+ L"Fdt",
+ &gFdtVariableGuid,
+ NULL,
+ &DataSize,
+ TextDevicePath
+ );
+ if (!EFI_ERROR (Status)) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_DEVICE_PATH),
+ mFdtPlatformDxeHiiHandle,
+ TextDevicePath
+ );
+ }
+
+ FreePool (TextDevicePath);
+ }
+ }
+
+ //
+ // Loop over the device path list provided by "PcdFdtDevicePaths". The device
+ // paths are in text form and separated by a semi-colon.
+ //
+
+ TextDevicePaths = AllocateCopyPool (
+ StrSize ((CHAR16*)PcdGetPtr (PcdFdtDevicePaths)),
+ (CHAR16*)PcdGetPtr (PcdFdtDevicePaths)
+ );
+ if (TextDevicePaths == NULL) {
+ return;
+ }
+
+ for (TextDevicePath = TextDevicePaths;
+ *TextDevicePath != L'\0' ; ) {
+ TextDevicePathSeparator = StrStr (TextDevicePath, L";");
+
+ if (TextDevicePathSeparator != NULL) {
+ *TextDevicePathSeparator = L'\0';
+ }
+
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_DEVICE_PATH),
+ mFdtPlatformDxeHiiHandle,
+ TextDevicePath
+ );
+
+ if (TextDevicePathSeparator == NULL) {
+ break;
+ }
+ TextDevicePath = TextDevicePathSeparator + 1;
+ }
+
+ FreePool (TextDevicePaths);
+}
+
+/**
+ Update the text device path stored in the "Fdt" UEFI variable given
+ an EFI Shell file path or a text device path.
+
+ This function is a subroutine of the ShellDynCmdSetFdtHandler() function
+ to make its code easier to read.
+
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing the "setfdt" command.
+ @param[in] FilePath EFI Shell path or the device path to the FDT file.
+
+ @return SHELL_SUCCESS The text device path was succesfully updated.
+ @return SHELL_INVALID_PARAMETER The Shell file path is not valid.
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+ @return SHELL_DEVICE_ERROR The "Fdt" variable could not be saved due to a hardware failure.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable is read-only.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable cannot be deleted.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable could not be written due to security violation.
+ @return SHELL_NOT_FOUND Device path to text protocol not found.
+ @return SHELL_ABORTED Operation aborted.
+
+**/
+STATIC
+SHELL_STATUS
+UpdateFdtTextDevicePath (
+ IN EFI_SHELL_PROTOCOL *Shell,
+ IN CONST CHAR16 *FilePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH *DevicePath;
+ EFI_DEVICE_PATH_TO_TEXT_PROTOCOL *EfiDevicePathToTextProtocol;
+ CHAR16 *TextDevicePath;
+ CHAR16 *FdtVariableValue;
+ EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL *EfiDevicePathFromTextProtocol;
+ SHELL_STATUS ShellStatus;
+
+ ASSERT (FilePath != NULL);
+ DevicePath = NULL;
+ TextDevicePath = NULL;
+ FdtVariableValue = NULL;
+
+ if (*FilePath != L'\0') {
+ DevicePath = Shell->GetDevicePathFromFilePath (FilePath);
+ if (DevicePath != NULL) {
+ Status = gBS->LocateProtocol (
+ &gEfiDevicePathToTextProtocolGuid,
+ NULL,
+ (VOID **)&EfiDevicePathToTextProtocol
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ TextDevicePath = EfiDevicePathToTextProtocol->ConvertDevicePathToText (
+ DevicePath,
+ FALSE,
+ FALSE
+ );
+ if (TextDevicePath == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error;
+ }
+ FdtVariableValue = TextDevicePath;
+ } else {
+ //
+ // Try to convert back the EFI Device Path String into a EFI device Path
+ // to ensure the format is valid
+ //
+ Status = gBS->LocateProtocol (
+ &gEfiDevicePathFromTextProtocolGuid,
+ NULL,
+ (VOID **)&EfiDevicePathFromTextProtocol
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ DevicePath = EfiDevicePathFromTextProtocol->ConvertTextToDevicePath (
+ FilePath
+ );
+ if (DevicePath == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Error;
+ }
+ FdtVariableValue = (CHAR16*)FilePath;
+ }
+ }
+
+ Status = gRT->SetVariable (
+ (CHAR16*)L"Fdt",
+ &gFdtVariableGuid,
+ EFI_VARIABLE_RUNTIME_ACCESS |
+ EFI_VARIABLE_NON_VOLATILE |
+ EFI_VARIABLE_BOOTSERVICE_ACCESS ,
+ (FdtVariableValue != NULL) ?
+ StrSize (FdtVariableValue) : 0,
+ FdtVariableValue
+ );
+
+Error:
+ ShellStatus = EfiCodeToShellCode (Status);
+ if (!EFI_ERROR (Status)) {
+ if (FdtVariableValue != NULL) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_UPDATE_SUCCEEDED),
+ mFdtPlatformDxeHiiHandle,
+ FdtVariableValue
+ );
+ } else {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_UPDATE_DELETED),
+ mFdtPlatformDxeHiiHandle
+ );
+ }
+ } else {
+ if (Status == EFI_INVALID_PARAMETER) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_INVALID_PATH),
+ mFdtPlatformDxeHiiHandle,
+ FilePath
+ );
+ } else {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_ERROR),
+ mFdtPlatformDxeHiiHandle,
+ Status
+ );
+ }
+ }
+
+ if (DevicePath != NULL) {
+ FreePool (DevicePath);
+ }
+ if (TextDevicePath != NULL) {
+ FreePool (TextDevicePath);
+ }
+
+ return ShellStatus;
+}
+
+/**
+ This is the shell command "setfdt" handler function. This function handles
+ the command when it is invoked in the shell.
+
+ @param[in] This The instance of the
+ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] SystemTable The pointer to the UEFI system table.
+ @param[in] ShellParameters The parameters associated with the command.
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing this command.
+
+ @return SHELL_SUCCESS The operation was successful.
+ @return SHELL_ABORTED Operation aborted due to internal error.
+ @return SHELL_INVALID_PARAMETER The parameters of the command are not valid.
+ @return SHELL_INVALID_PARAMETER The EFI Shell file path is not valid.
+ @return SHELL_NOT_FOUND Failed to locate a protocol or a file.
+ @return SHELL_UNSUPPORTED Device path not supported.
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+ @return SHELL_DEVICE_ERROR The "Fdt" variable could not be saved due to a hardware failure.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable is read-only.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable cannot be deleted.
+ @return SHELL_ACCESS_DENIED The "Fdt" variable could not be written due to security violation.
+
+**/
+SHELL_STATUS
+EFIAPI
+ShellDynCmdSetFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ )
+{
+ SHELL_STATUS ShellStatus;
+ EFI_STATUS Status;
+ LIST_ENTRY *ParamPackage;
+ BOOLEAN FilePath;
+ CONST CHAR16 *ValueStr;
+ CHAR16 *TextDevicePath;
+
+ ShellStatus = SHELL_SUCCESS;
+ ParamPackage = NULL;
+ FilePath = FALSE;
+
+ //
+ // Install the Shell and Shell Parameters Protocols on the driver
+ // image. This is necessary for the initialisation of the Shell
+ // Library to succeed in the next step.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ return SHELL_ABORTED;
+ }
+
+ //
+ // Initialise the Shell Library as we are going to use it.
+ // Assert that the return code is EFI_SUCCESS as it should.
+ // To anticipate any change is the codes returned by
+ // ShellInitialize(), leave in case of error.
+ //
+ Status = ShellInitialize ();
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ return SHELL_ABORTED;
+ }
+
+ Status = ShellCommandLineParse (ParamList, &ParamPackage, NULL, TRUE);
+ if (!EFI_ERROR (Status)) {
+ switch (ShellCommandLineGetCount (ParamPackage)) {
+ case 1:
+ //
+ // Case "setfdt" or "setfdt -i"
+ //
+ if (!ShellCommandLineGetFlag (ParamPackage, L"-i")) {
+ DisplayFdtDevicePaths ();
+ }
+ break;
+
+ case 2:
+ //
+ // Case "setfdt file_path" or
+ // "setfdt -i file_path" or
+ // "setfdt file_path -i"
+ //
+ FilePath = TRUE;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+ }
+ if (EFI_ERROR (Status)) {
+ ShellStatus = EfiCodeToShellCode (Status);
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_ERROR),
+ mFdtPlatformDxeHiiHandle,
+ Status
+ );
+ goto Error;
+ }
+
+ //
+ // Update the preferred device path for the FDT if asked for.
+ //
+ if (FilePath) {
+ ValueStr = ShellCommandLineGetRawValue (ParamPackage, 1);
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_UPDATING),
+ mFdtPlatformDxeHiiHandle
+ );
+ ShellStatus = UpdateFdtTextDevicePath (Shell, ValueStr);
+ if (ShellStatus != SHELL_SUCCESS) {
+ goto Error;
+ }
+ }
+
+ //
+ // Run the FDT installation process if asked for.
+ //
+ if (ShellCommandLineGetFlag (ParamPackage, L"-i")) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_INSTALLING),
+ mFdtPlatformDxeHiiHandle
+ );
+ Status = RunFdtInstallation (&TextDevicePath);
+ ShellStatus = EfiCodeToShellCode (Status);
+ if (!EFI_ERROR (Status)) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_INSTALL_SUCCEEDED),
+ mFdtPlatformDxeHiiHandle,
+ TextDevicePath
+ );
+ FreePool (TextDevicePath);
+ } else {
+ if (Status == EFI_INVALID_PARAMETER) {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_INVALID_DEVICE_PATH),
+ mFdtPlatformDxeHiiHandle
+ );
+ } else {
+ ShellPrintHiiEx (
+ -1, -1, NULL,
+ STRING_TOKEN (STR_SETFDT_ERROR),
+ mFdtPlatformDxeHiiHandle,
+ Status
+ );
+ }
+ DisplayFdtDevicePaths ();
+ }
+ }
+
+Error:
+ gBS->UninstallMultipleProtocolInterfaces (
+ gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+ ShellCommandLineFreeVarList (ParamPackage);
+
+ return ShellStatus;
+}
+
+/**
+ This is the shell command "setfdt" help handler function. This
+ function returns the formatted help for the "setfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdSetFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ )
+{
+ //
+ // This allocates memory. The caller has to free the allocated memory.
+ //
+ return HiiGetString (
+ mFdtPlatformDxeHiiHandle,
+ STRING_TOKEN (STR_GET_HELP_SETFDT),
+ Language
+ );
+}
Import FdtPlatformDxe from EmbeddedPkg into Platform/ARM, given that it is not used anywhere else, nor should it be. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatform.c | 461 +++++++++++++++++++ Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatform.h | 174 ++++++++ Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatformDxe.dec | 31 ++ Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf | 65 +++ Platform/ARM/Drivers/FdtPlatformDxe/FdtPlatformDxe.uni | 109 +++++ Platform/ARM/Drivers/FdtPlatformDxe/README.txt | 72 +++ Platform/ARM/Drivers/FdtPlatformDxe/ShellDumpFdt.c | 279 ++++++++++++ Platform/ARM/Drivers/FdtPlatformDxe/ShellSetFdt.c | 468 ++++++++++++++++++++ 8 files changed, 1659 insertions(+) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel