new file mode 100644
@@ -0,0 +1,126 @@
+/** @file PL111Lcd.c
+
+ Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/LcdHwLib.h>
+#include <Library/LcdPlatformLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+#include "PL111Lcd.h"
+
+/**********************************************************************
+ *
+ * This file contains all the bits of the PL111 that are
+ * platform independent.
+ *
+ **********************************************************************/
+
+EFI_STATUS
+LcdIdentify (
+ VOID
+ )
+{
+ DEBUG ((EFI_D_WARN, "Probing ID registers at 0x%lx for a PL111\n",
+ PL111_REG_CLCD_PERIPH_ID_0));
+
+ // Check if this is a PL111
+ if (MmioRead8 (PL111_REG_CLCD_PERIPH_ID_0) == PL111_CLCD_PERIPH_ID_0 &&
+ MmioRead8 (PL111_REG_CLCD_PERIPH_ID_1) == PL111_CLCD_PERIPH_ID_1 &&
+ (MmioRead8 (PL111_REG_CLCD_PERIPH_ID_2) & 0xf) == PL111_CLCD_PERIPH_ID_2 &&
+ MmioRead8 (PL111_REG_CLCD_PERIPH_ID_3) == PL111_CLCD_PERIPH_ID_3 &&
+ MmioRead8 (PL111_REG_CLCD_P_CELL_ID_0) == PL111_CLCD_P_CELL_ID_0 &&
+ MmioRead8 (PL111_REG_CLCD_P_CELL_ID_1) == PL111_CLCD_P_CELL_ID_1 &&
+ MmioRead8 (PL111_REG_CLCD_P_CELL_ID_2) == PL111_CLCD_P_CELL_ID_2 &&
+ MmioRead8 (PL111_REG_CLCD_P_CELL_ID_3) == PL111_CLCD_P_CELL_ID_3) {
+ return EFI_SUCCESS;
+ }
+ return EFI_NOT_FOUND;
+}
+
+EFI_STATUS
+LcdInitialize (
+ IN EFI_PHYSICAL_ADDRESS VramBaseAddress
+ )
+{
+ // Define start of the VRAM. This never changes for any graphics mode
+ MmioWrite32(PL111_REG_LCD_UP_BASE, (UINT32) VramBaseAddress);
+ MmioWrite32(PL111_REG_LCD_LP_BASE, 0); // We are not using a double buffer
+
+ // Disable all interrupts from the PL111
+ MmioWrite32(PL111_REG_LCD_IMSC, 0);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+LcdSetMode (
+ IN UINT32 ModeNumber
+ )
+{
+ EFI_STATUS Status;
+ UINT32 HRes;
+ UINT32 HSync;
+ UINT32 HBackPorch;
+ UINT32 HFrontPorch;
+ UINT32 VRes;
+ UINT32 VSync;
+ UINT32 VBackPorch;
+ UINT32 VFrontPorch;
+ UINT32 LcdControl;
+ LCD_BPP LcdBpp;
+
+ // Set the video mode timings and other relevant information
+ Status = LcdPlatformGetTimings (ModeNumber,
+ &HRes,&HSync,&HBackPorch,&HFrontPorch,
+ &VRes,&VSync,&VBackPorch,&VFrontPorch);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR( Status )) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ Status = LcdPlatformGetBpp (ModeNumber,&LcdBpp);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR( Status )) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Disable the CLCD_LcdEn bit
+ LcdControl = MmioRead32( PL111_REG_LCD_CONTROL);
+ MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl & ~1);
+
+ // Set Timings
+ MmioWrite32 (PL111_REG_LCD_TIMING_0, HOR_AXIS_PANEL(HBackPorch, HFrontPorch, HSync, HRes));
+ MmioWrite32 (PL111_REG_LCD_TIMING_1, VER_AXIS_PANEL(VBackPorch, VFrontPorch, VSync, VRes));
+ MmioWrite32 (PL111_REG_LCD_TIMING_2, CLK_SIG_POLARITY(HRes));
+ MmioWrite32 (PL111_REG_LCD_TIMING_3, 0);
+
+ // PL111_REG_LCD_CONTROL
+ LcdControl = PL111_CTRL_LCD_EN | PL111_CTRL_LCD_BPP(LcdBpp) | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR;
+ MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl);
+
+ // Turn on power to the LCD Panel
+ LcdControl |= PL111_CTRL_LCD_PWR;
+ MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl);
+
+ return EFI_SUCCESS;
+}
+
+VOID
+LcdShutdown (
+ VOID
+ )
+{
+ // Disable the controller
+ MmioAnd32 (PL111_REG_LCD_CONTROL, ~PL111_CTRL_LCD_EN);
+}
new file mode 100644
@@ -0,0 +1,149 @@
+/** @file PL111Lcd.h
+
+ Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ **/
+
+#ifndef _PL111LCD_H__
+#define _PL111LCD_H__
+
+/**********************************************************************
+ *
+ * This header file contains all the bits of the PL111 that are
+ * platform independent.
+ *
+ **********************************************************************/
+
+// Controller Register Offsets
+#define PL111_REG_LCD_TIMING_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x000)
+#define PL111_REG_LCD_TIMING_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x004)
+#define PL111_REG_LCD_TIMING_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x008)
+#define PL111_REG_LCD_TIMING_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x00C)
+#define PL111_REG_LCD_UP_BASE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x010)
+#define PL111_REG_LCD_LP_BASE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x014)
+#define PL111_REG_LCD_CONTROL ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x018)
+#define PL111_REG_LCD_IMSC ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x01C)
+#define PL111_REG_LCD_RIS ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x020)
+#define PL111_REG_LCD_MIS ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x024)
+#define PL111_REG_LCD_ICR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x028)
+#define PL111_REG_LCD_UP_CURR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x02C)
+#define PL111_REG_LCD_LP_CURR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x030)
+#define PL111_REG_LCD_PALETTE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x200)
+
+// Identification Register Offsets
+#define PL111_REG_CLCD_PERIPH_ID_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE0)
+#define PL111_REG_CLCD_PERIPH_ID_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE4)
+#define PL111_REG_CLCD_PERIPH_ID_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE8)
+#define PL111_REG_CLCD_PERIPH_ID_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFEC)
+#define PL111_REG_CLCD_P_CELL_ID_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF0)
+#define PL111_REG_CLCD_P_CELL_ID_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF4)
+#define PL111_REG_CLCD_P_CELL_ID_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF8)
+#define PL111_REG_CLCD_P_CELL_ID_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFFC)
+
+#define PL111_CLCD_PERIPH_ID_0 0x11
+#define PL111_CLCD_PERIPH_ID_1 0x11
+#define PL111_CLCD_PERIPH_ID_2 0x04
+#define PL111_CLCD_PERIPH_ID_3 0x00
+#define PL111_CLCD_P_CELL_ID_0 0x0D
+#define PL111_CLCD_P_CELL_ID_1 0xF0
+#define PL111_CLCD_P_CELL_ID_2 0x05
+#define PL111_CLCD_P_CELL_ID_3 0xB1
+
+/**********************************************************************/
+
+// Register components (register bits)
+
+// This should make life easier to program specific settings in the different registers
+// by simplifying the setting up of the individual bits of each register
+// and then assembling the final register value.
+
+/**********************************************************************/
+
+// Register: PL111_REG_LCD_TIMING_0
+#define HOR_AXIS_PANEL(hbp,hfp,hsw,hor_res) (UINT32)(((UINT32)(hbp) << 24) | ((UINT32)(hfp) << 16) | ((UINT32)(hsw) << 8) | (((UINT32)((hor_res)/16)-1) << 2))
+
+// Register: PL111_REG_LCD_TIMING_1
+#define VER_AXIS_PANEL(vbp,vfp,vsw,ver_res) (UINT32)(((UINT32)(vbp) << 24) | ((UINT32)(vfp) << 16) | ((UINT32)(vsw) << 10) | ((ver_res)-1))
+
+// Register: PL111_REG_LCD_TIMING_2
+#define PL111_BIT_SHIFT_PCD_HI 27
+#define PL111_BIT_SHIFT_BCD 26
+#define PL111_BIT_SHIFT_CPL 16
+#define PL111_BIT_SHIFT_IOE 14
+#define PL111_BIT_SHIFT_IPC 13
+#define PL111_BIT_SHIFT_IHS 12
+#define PL111_BIT_SHIFT_IVS 11
+#define PL111_BIT_SHIFT_ACB 6
+#define PL111_BIT_SHIFT_CLKSEL 5
+#define PL111_BIT_SHIFT_PCD_LO 0
+
+#define PL111_BCD (1 << 26)
+#define PL111_IPC (1 << 13)
+#define PL111_IHS (1 << 12)
+#define PL111_IVS (1 << 11)
+
+#define CLK_SIG_POLARITY(hor_res) (UINT32)(PL111_BCD | PL111_IPC | PL111_IHS | PL111_IVS | (((hor_res)-1) << 16))
+
+// Register: PL111_REG_LCD_TIMING_3
+#define PL111_BIT_SHIFT_LEE 16
+#define PL111_BIT_SHIFT_LED 0
+
+#define PL111_CTRL_WATERMARK (1 << 16)
+#define PL111_CTRL_LCD_V_COMP (1 << 12)
+#define PL111_CTRL_LCD_PWR (1 << 11)
+#define PL111_CTRL_BEPO (1 << 10)
+#define PL111_CTRL_BEBO (1 << 9)
+#define PL111_CTRL_BGR (1 << 8)
+#define PL111_CTRL_LCD_DUAL (1 << 7)
+#define PL111_CTRL_LCD_MONO_8 (1 << 6)
+#define PL111_CTRL_LCD_TFT (1 << 5)
+#define PL111_CTRL_LCD_BW (1 << 4)
+#define PL111_CTRL_LCD_1BPP (0 << 1)
+#define PL111_CTRL_LCD_2BPP (1 << 1)
+#define PL111_CTRL_LCD_4BPP (2 << 1)
+#define PL111_CTRL_LCD_8BPP (3 << 1)
+#define PL111_CTRL_LCD_16BPP (4 << 1)
+#define PL111_CTRL_LCD_24BPP (5 << 1)
+#define PL111_CTRL_LCD_16BPP_565 (6 << 1)
+#define PL111_CTRL_LCD_12BPP_444 (7 << 1)
+#define PL111_CTRL_LCD_BPP(Bpp) ((Bpp) << 1)
+#define PL111_CTRL_LCD_EN 1
+
+/**********************************************************************/
+
+// Register: PL111_REG_LCD_TIMING_0
+#define PL111_LCD_TIMING_0_HBP(hbp) (((hbp) & 0xFF) << 24)
+#define PL111_LCD_TIMING_0_HFP(hfp) (((hfp) & 0xFF) << 16)
+#define PL111_LCD_TIMING_0_HSW(hsw) (((hsw) & 0xFF) << 8)
+#define PL111_LCD_TIMING_0_PPL(ppl) (((hsw) & 0x3F) << 2)
+
+// Register: PL111_REG_LCD_TIMING_1
+#define PL111_LCD_TIMING_1_VBP(vbp) (((vbp) & 0xFF) << 24)
+#define PL111_LCD_TIMING_1_VFP(vfp) (((vfp) & 0xFF) << 16)
+#define PL111_LCD_TIMING_1_VSW(vsw) (((vsw) & 0x3F) << 10)
+#define PL111_LCD_TIMING_1_LPP(lpp) ((lpp) & 0xFC)
+
+// Register: PL111_REG_LCD_TIMING_2
+#define PL111_BIT_MASK_PCD_HI 0xF8000000
+#define PL111_BIT_MASK_BCD 0x04000000
+#define PL111_BIT_MASK_CPL 0x03FF0000
+#define PL111_BIT_MASK_IOE 0x00004000
+#define PL111_BIT_MASK_IPC 0x00002000
+#define PL111_BIT_MASK_IHS 0x00001000
+#define PL111_BIT_MASK_IVS 0x00000800
+#define PL111_BIT_MASK_ACB 0x000007C0
+#define PL111_BIT_MASK_CLKSEL 0x00000020
+#define PL111_BIT_MASK_PCD_LO 0x0000001F
+
+// Register: PL111_REG_LCD_TIMING_3
+#define PL111_BIT_MASK_LEE 0x00010000
+#define PL111_BIT_MASK_LED 0x0000007F
+
+#endif /* _PL111LCD_H__ */
new file mode 100644
@@ -0,0 +1,40 @@
+#/** @file PL111Lcd.inf
+#
+# Component description file for PL111Lcd module
+#
+# Copyright (c) 2011-2017, ARM Ltd. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PL111Lcd
+ FILE_GUID = 407B4008-BF5B-11DF-9547-CF16E0D72085
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = LcdHwLib
+
+[Sources.common]
+ PL111Lcd.c
+
+[Packages]
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmPkg/ArmPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiLib
+ BaseLib
+ DebugLib
+ IoLib
+
+[FixedPcd]
+ gArmPlatformTokenSpaceGuid.PcdPL111LcdBase