From patchwork Fri Dec 1 11:32:52 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ard Biesheuvel X-Patchwork-Id: 120311 Delivered-To: patch@linaro.org Received: by 10.140.22.227 with SMTP id 90csp1014805qgn; Fri, 1 Dec 2017 03:33:12 -0800 (PST) X-Google-Smtp-Source: AGs4zMZqhTeYFwhaO8vFmoLxUrW4xd0CNjKiKuUHE4p9iFGOtlCyyvZ2FCz+uVFBg/pE2fPyPELZ X-Received: by 10.159.198.4 with SMTP id f4mr5800075plo.331.1512127991998; Fri, 01 Dec 2017 03:33:11 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1512127991; cv=none; d=google.com; s=arc-20160816; b=BAtt7t3EPG0urr2F3bFKJf8Pzfy6WZtP4wUfcTZDkjPBoXQBvpXZNvJ/rAQ/GDq1/4 mnAhAw8v0meUpO0vLrmsWIQs4aIzcEiQ3lr09ikIZrslJ0F2Lcu1zHnV/VJQag6gApiO mJnUd6lknGzJg/Tu5Dw72Yuxp2fs5vI/vPlw8g5iJM6i5h49EuKuDYvL3o8NGw0onS7q 4p6cR4mWsYRU+Fu/49fZqtsHBdXpYALhQQ9Z1N1Osb/EGrwcOnJYEHrgetokK4vNVAFV XGr2lr/yxaq1UqEjzasAXzY/FuUgqD8ztsE1EZGxaXB+FxFQIUSBF6JmCGv5QUmchuc8 16bA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:mime-version:cc :list-subscribe:list-help:list-post:list-archive:list-unsubscribe :list-id:precedence:subject:references:in-reply-to:message-id:date :to:from:dkim-signature:delivered-to:arc-authentication-results; bh=xSG6fxir7ghrB/yhkfkY+mPLY6MPGYtynRcTtFf2+D0=; b=H/xguWgERFxZ2CWF0TEBifNQHoD9kR2WAl4tVfL92AhG4NAGsavo+L2JY2tiysLgtv rZM5D87k1q+fZhnBikuEKqGDHlZEyzTALSMPVsJ1oGXC4nWwHSRRYfjh+yeCfsKiQXCJ F9iSXHW/7euMG9J7X0sfm/hvuB0Ci/jz+/93iNqZLKCWsFtEZ2y/fv6UUnUq9jFlTdor uav6N6W7j7/2d2L7Zqn58g5N7KP2ZaAG/uDBfM3wCyLudd6djgWDYoEk5URQjohzo2ok lmhqgd5NTjkse9YPygc+apX9TqeaClP/q1+Fc6MF3pEch7CEcoAZZPuuPGxzB2c9fOYB 5VJw== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=R94od2qe; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from ml01.01.org (ml01.01.org. [198.145.21.10]) by mx.google.com with ESMTPS id i3si4799402pld.62.2017.12.01.03.33.11 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 01 Dec 2017 03:33:11 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) client-ip=198.145.21.10; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=R94od2qe; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 198.145.21.10 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 23EF920352A8C; Fri, 1 Dec 2017 03:28:45 -0800 (PST) X-Original-To: edk2-devel@lists.01.org Delivered-To: edk2-devel@lists.01.org Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c09::243; helo=mail-wm0-x243.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org Received: from mail-wm0-x243.google.com (mail-wm0-x243.google.com [IPv6:2a00:1450:400c:c09::243]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 70D6620352A8C for ; Fri, 1 Dec 2017 03:28:43 -0800 (PST) Received: by mail-wm0-x243.google.com with SMTP id t8so2949031wmc.3 for ; Fri, 01 Dec 2017 03:33:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=VzJPVu4lDVayls0DM83XqoWaUJ7cAtGntSajL+TSdW0=; b=R94od2qeqLtyUbQ+v5hlq9KS+A5WOlEC8ZL7Ix0RT5OxDsZYOPSfl99SdhzQ8sKz49 2tKqzVLerk+RrTmnCAOlEwCWlCZ6Syeol1Ka0RWRDplNpNxqq3vAOmzvUTMQXWrOAl4J Kp9EecAuTd63uWpA1uu9Jji1cT978MqZyF6Pg= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=VzJPVu4lDVayls0DM83XqoWaUJ7cAtGntSajL+TSdW0=; b=HfSMqyBgDNtI2RFDYYJ9AWrY0WLaIJm2Nmo/6cD/1A8o4i10Dm8E6YqMXke1rOGAdR VZ+iPjJvYFLdN7EWyBknLKxYt20mIjPxanip0U7/ezX/zuasNTHz27sPpsWX88P2omLv EBZfUL79fZaE1YXrPbcBS1cDQ0O0vWnnTSU6PjdreX6PNtRwM4ngh7FmAsKRvXnaWA5P UbI+RwyTG8UBn08UqW4gIKBQNuiJGDd/Qy0evV0YsTKUaxQ9gzuVyRjlZ+89q/yl3TWK e3fPqwPixXWhaBJ698RkMz4nz3x3CJ5wMxjwoTzuJSIkzTc3uWEhdlQ7C7cB8BQUwnB7 lOvQ== X-Gm-Message-State: AJaThX5sug3RBj7ZzFUQTv34Sl5VUtmytGubW+h43Y6kZu1pRT46dloU 1g/J+2WCmZ4dHFhk/bIAhpP9dp//evM= X-Received: by 10.28.156.23 with SMTP id f23mr1108140wme.128.1512127987965; Fri, 01 Dec 2017 03:33:07 -0800 (PST) Received: from localhost.localdomain ([105.150.171.234]) by smtp.gmail.com with ESMTPSA id k11sm918430wmi.18.2017.12.01.03.33.05 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 01 Dec 2017 03:33:07 -0800 (PST) From: Ard Biesheuvel To: edk2-devel@lists.01.org Date: Fri, 1 Dec 2017 11:32:52 +0000 Message-Id: <20171201113255.23581-3-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171201113255.23581-1-ard.biesheuvel@linaro.org> References: <20171201113255.23581-1-ard.biesheuvel@linaro.org> Subject: [edk2] [PATCH 2/5] ArmPlatformPkg: implement LcdHwLib for PL111 X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: leif.lindholm@linaro.org, Ard Biesheuvel MIME-Version: 1.0 Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" Convert the PL111 specific code of LcdGraphicsOutputDxe into a LcdHwlib implementation that we will wire up later into LcdGraphicsOutputDxe. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Girish Pathak Signed-off-by: Evan Lloyd Signed-off-by: Ard Biesheuvel --- ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.c | 126 +++++++++++++++++ ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.h | 149 ++++++++++++++++++++ ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf | 40 ++++++ 3 files changed, 315 insertions(+) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel diff --git a/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.c b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.c new file mode 100644 index 000000000000..9b4a02045ab7 --- /dev/null +++ b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.c @@ -0,0 +1,126 @@ +/** @file PL111Lcd.c + + Copyright (c) 2011-2012, ARM Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ +#include +#include +#include +#include +#include + +#include "PL111Lcd.h" + +/********************************************************************** + * + * This file contains all the bits of the PL111 that are + * platform independent. + * + **********************************************************************/ + +EFI_STATUS +LcdIdentify ( + VOID + ) +{ + DEBUG ((EFI_D_WARN, "Probing ID registers at 0x%lx for a PL111\n", + PL111_REG_CLCD_PERIPH_ID_0)); + + // Check if this is a PL111 + if (MmioRead8 (PL111_REG_CLCD_PERIPH_ID_0) == PL111_CLCD_PERIPH_ID_0 && + MmioRead8 (PL111_REG_CLCD_PERIPH_ID_1) == PL111_CLCD_PERIPH_ID_1 && + (MmioRead8 (PL111_REG_CLCD_PERIPH_ID_2) & 0xf) == PL111_CLCD_PERIPH_ID_2 && + MmioRead8 (PL111_REG_CLCD_PERIPH_ID_3) == PL111_CLCD_PERIPH_ID_3 && + MmioRead8 (PL111_REG_CLCD_P_CELL_ID_0) == PL111_CLCD_P_CELL_ID_0 && + MmioRead8 (PL111_REG_CLCD_P_CELL_ID_1) == PL111_CLCD_P_CELL_ID_1 && + MmioRead8 (PL111_REG_CLCD_P_CELL_ID_2) == PL111_CLCD_P_CELL_ID_2 && + MmioRead8 (PL111_REG_CLCD_P_CELL_ID_3) == PL111_CLCD_P_CELL_ID_3) { + return EFI_SUCCESS; + } + return EFI_NOT_FOUND; +} + +EFI_STATUS +LcdInitialize ( + IN EFI_PHYSICAL_ADDRESS VramBaseAddress + ) +{ + // Define start of the VRAM. This never changes for any graphics mode + MmioWrite32(PL111_REG_LCD_UP_BASE, (UINT32) VramBaseAddress); + MmioWrite32(PL111_REG_LCD_LP_BASE, 0); // We are not using a double buffer + + // Disable all interrupts from the PL111 + MmioWrite32(PL111_REG_LCD_IMSC, 0); + + return EFI_SUCCESS; +} + +EFI_STATUS +LcdSetMode ( + IN UINT32 ModeNumber + ) +{ + EFI_STATUS Status; + UINT32 HRes; + UINT32 HSync; + UINT32 HBackPorch; + UINT32 HFrontPorch; + UINT32 VRes; + UINT32 VSync; + UINT32 VBackPorch; + UINT32 VFrontPorch; + UINT32 LcdControl; + LCD_BPP LcdBpp; + + // Set the video mode timings and other relevant information + Status = LcdPlatformGetTimings (ModeNumber, + &HRes,&HSync,&HBackPorch,&HFrontPorch, + &VRes,&VSync,&VBackPorch,&VFrontPorch); + ASSERT_EFI_ERROR (Status); + if (EFI_ERROR( Status )) { + return EFI_DEVICE_ERROR; + } + + Status = LcdPlatformGetBpp (ModeNumber,&LcdBpp); + ASSERT_EFI_ERROR (Status); + if (EFI_ERROR( Status )) { + return EFI_DEVICE_ERROR; + } + + // Disable the CLCD_LcdEn bit + LcdControl = MmioRead32( PL111_REG_LCD_CONTROL); + MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl & ~1); + + // Set Timings + MmioWrite32 (PL111_REG_LCD_TIMING_0, HOR_AXIS_PANEL(HBackPorch, HFrontPorch, HSync, HRes)); + MmioWrite32 (PL111_REG_LCD_TIMING_1, VER_AXIS_PANEL(VBackPorch, VFrontPorch, VSync, VRes)); + MmioWrite32 (PL111_REG_LCD_TIMING_2, CLK_SIG_POLARITY(HRes)); + MmioWrite32 (PL111_REG_LCD_TIMING_3, 0); + + // PL111_REG_LCD_CONTROL + LcdControl = PL111_CTRL_LCD_EN | PL111_CTRL_LCD_BPP(LcdBpp) | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR; + MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl); + + // Turn on power to the LCD Panel + LcdControl |= PL111_CTRL_LCD_PWR; + MmioWrite32(PL111_REG_LCD_CONTROL, LcdControl); + + return EFI_SUCCESS; +} + +VOID +LcdShutdown ( + VOID + ) +{ + // Disable the controller + MmioAnd32 (PL111_REG_LCD_CONTROL, ~PL111_CTRL_LCD_EN); +} diff --git a/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.h b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.h new file mode 100644 index 000000000000..18e28af805f6 --- /dev/null +++ b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.h @@ -0,0 +1,149 @@ +/** @file PL111Lcd.h + + Copyright (c) 2011, ARM Ltd. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + **/ + +#ifndef _PL111LCD_H__ +#define _PL111LCD_H__ + +/********************************************************************** + * + * This header file contains all the bits of the PL111 that are + * platform independent. + * + **********************************************************************/ + +// Controller Register Offsets +#define PL111_REG_LCD_TIMING_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x000) +#define PL111_REG_LCD_TIMING_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x004) +#define PL111_REG_LCD_TIMING_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x008) +#define PL111_REG_LCD_TIMING_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x00C) +#define PL111_REG_LCD_UP_BASE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x010) +#define PL111_REG_LCD_LP_BASE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x014) +#define PL111_REG_LCD_CONTROL ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x018) +#define PL111_REG_LCD_IMSC ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x01C) +#define PL111_REG_LCD_RIS ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x020) +#define PL111_REG_LCD_MIS ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x024) +#define PL111_REG_LCD_ICR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x028) +#define PL111_REG_LCD_UP_CURR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x02C) +#define PL111_REG_LCD_LP_CURR ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x030) +#define PL111_REG_LCD_PALETTE ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0x200) + +// Identification Register Offsets +#define PL111_REG_CLCD_PERIPH_ID_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE0) +#define PL111_REG_CLCD_PERIPH_ID_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE4) +#define PL111_REG_CLCD_PERIPH_ID_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFE8) +#define PL111_REG_CLCD_PERIPH_ID_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFEC) +#define PL111_REG_CLCD_P_CELL_ID_0 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF0) +#define PL111_REG_CLCD_P_CELL_ID_1 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF4) +#define PL111_REG_CLCD_P_CELL_ID_2 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFF8) +#define PL111_REG_CLCD_P_CELL_ID_3 ((UINTN)PcdGet32 (PcdPL111LcdBase) + 0xFFC) + +#define PL111_CLCD_PERIPH_ID_0 0x11 +#define PL111_CLCD_PERIPH_ID_1 0x11 +#define PL111_CLCD_PERIPH_ID_2 0x04 +#define PL111_CLCD_PERIPH_ID_3 0x00 +#define PL111_CLCD_P_CELL_ID_0 0x0D +#define PL111_CLCD_P_CELL_ID_1 0xF0 +#define PL111_CLCD_P_CELL_ID_2 0x05 +#define PL111_CLCD_P_CELL_ID_3 0xB1 + +/**********************************************************************/ + +// Register components (register bits) + +// This should make life easier to program specific settings in the different registers +// by simplifying the setting up of the individual bits of each register +// and then assembling the final register value. + +/**********************************************************************/ + +// Register: PL111_REG_LCD_TIMING_0 +#define HOR_AXIS_PANEL(hbp,hfp,hsw,hor_res) (UINT32)(((UINT32)(hbp) << 24) | ((UINT32)(hfp) << 16) | ((UINT32)(hsw) << 8) | (((UINT32)((hor_res)/16)-1) << 2)) + +// Register: PL111_REG_LCD_TIMING_1 +#define VER_AXIS_PANEL(vbp,vfp,vsw,ver_res) (UINT32)(((UINT32)(vbp) << 24) | ((UINT32)(vfp) << 16) | ((UINT32)(vsw) << 10) | ((ver_res)-1)) + +// Register: PL111_REG_LCD_TIMING_2 +#define PL111_BIT_SHIFT_PCD_HI 27 +#define PL111_BIT_SHIFT_BCD 26 +#define PL111_BIT_SHIFT_CPL 16 +#define PL111_BIT_SHIFT_IOE 14 +#define PL111_BIT_SHIFT_IPC 13 +#define PL111_BIT_SHIFT_IHS 12 +#define PL111_BIT_SHIFT_IVS 11 +#define PL111_BIT_SHIFT_ACB 6 +#define PL111_BIT_SHIFT_CLKSEL 5 +#define PL111_BIT_SHIFT_PCD_LO 0 + +#define PL111_BCD (1 << 26) +#define PL111_IPC (1 << 13) +#define PL111_IHS (1 << 12) +#define PL111_IVS (1 << 11) + +#define CLK_SIG_POLARITY(hor_res) (UINT32)(PL111_BCD | PL111_IPC | PL111_IHS | PL111_IVS | (((hor_res)-1) << 16)) + +// Register: PL111_REG_LCD_TIMING_3 +#define PL111_BIT_SHIFT_LEE 16 +#define PL111_BIT_SHIFT_LED 0 + +#define PL111_CTRL_WATERMARK (1 << 16) +#define PL111_CTRL_LCD_V_COMP (1 << 12) +#define PL111_CTRL_LCD_PWR (1 << 11) +#define PL111_CTRL_BEPO (1 << 10) +#define PL111_CTRL_BEBO (1 << 9) +#define PL111_CTRL_BGR (1 << 8) +#define PL111_CTRL_LCD_DUAL (1 << 7) +#define PL111_CTRL_LCD_MONO_8 (1 << 6) +#define PL111_CTRL_LCD_TFT (1 << 5) +#define PL111_CTRL_LCD_BW (1 << 4) +#define PL111_CTRL_LCD_1BPP (0 << 1) +#define PL111_CTRL_LCD_2BPP (1 << 1) +#define PL111_CTRL_LCD_4BPP (2 << 1) +#define PL111_CTRL_LCD_8BPP (3 << 1) +#define PL111_CTRL_LCD_16BPP (4 << 1) +#define PL111_CTRL_LCD_24BPP (5 << 1) +#define PL111_CTRL_LCD_16BPP_565 (6 << 1) +#define PL111_CTRL_LCD_12BPP_444 (7 << 1) +#define PL111_CTRL_LCD_BPP(Bpp) ((Bpp) << 1) +#define PL111_CTRL_LCD_EN 1 + +/**********************************************************************/ + +// Register: PL111_REG_LCD_TIMING_0 +#define PL111_LCD_TIMING_0_HBP(hbp) (((hbp) & 0xFF) << 24) +#define PL111_LCD_TIMING_0_HFP(hfp) (((hfp) & 0xFF) << 16) +#define PL111_LCD_TIMING_0_HSW(hsw) (((hsw) & 0xFF) << 8) +#define PL111_LCD_TIMING_0_PPL(ppl) (((hsw) & 0x3F) << 2) + +// Register: PL111_REG_LCD_TIMING_1 +#define PL111_LCD_TIMING_1_VBP(vbp) (((vbp) & 0xFF) << 24) +#define PL111_LCD_TIMING_1_VFP(vfp) (((vfp) & 0xFF) << 16) +#define PL111_LCD_TIMING_1_VSW(vsw) (((vsw) & 0x3F) << 10) +#define PL111_LCD_TIMING_1_LPP(lpp) ((lpp) & 0xFC) + +// Register: PL111_REG_LCD_TIMING_2 +#define PL111_BIT_MASK_PCD_HI 0xF8000000 +#define PL111_BIT_MASK_BCD 0x04000000 +#define PL111_BIT_MASK_CPL 0x03FF0000 +#define PL111_BIT_MASK_IOE 0x00004000 +#define PL111_BIT_MASK_IPC 0x00002000 +#define PL111_BIT_MASK_IHS 0x00001000 +#define PL111_BIT_MASK_IVS 0x00000800 +#define PL111_BIT_MASK_ACB 0x000007C0 +#define PL111_BIT_MASK_CLKSEL 0x00000020 +#define PL111_BIT_MASK_PCD_LO 0x0000001F + +// Register: PL111_REG_LCD_TIMING_3 +#define PL111_BIT_MASK_LEE 0x00010000 +#define PL111_BIT_MASK_LED 0x0000007F + +#endif /* _PL111LCD_H__ */ diff --git a/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf new file mode 100644 index 000000000000..40db77eb079e --- /dev/null +++ b/ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf @@ -0,0 +1,40 @@ +#/** @file PL111Lcd.inf +# +# Component description file for PL111Lcd module +# +# Copyright (c) 2011-2017, ARM Ltd. All rights reserved.
+# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#**/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = PL111Lcd + FILE_GUID = 407B4008-BF5B-11DF-9547-CF16E0D72085 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = LcdHwLib + +[Sources.common] + PL111Lcd.c + +[Packages] + ArmPlatformPkg/ArmPlatformPkg.dec + ArmPkg/ArmPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + UefiLib + BaseLib + DebugLib + IoLib + +[FixedPcd] + gArmPlatformTokenSpaceGuid.PcdPL111LcdBase