From patchwork Thu Sep 2 09:56:04 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506124 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9F218C4320A for ; Thu, 2 Sep 2021 09:56:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 831C66108B for ; Thu, 2 Sep 2021 09:56:24 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S245647AbhIBJ5T (ORCPT ); Thu, 2 Sep 2021 05:57:19 -0400 Received: from mail.kernel.org ([198.145.29.99]:39110 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S245185AbhIBJ5R (ORCPT ); Thu, 2 Sep 2021 05:57:17 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id E1A9360724; Thu, 2 Sep 2021 09:56:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576578; bh=JWOUTN1X7Cc7Ebp1upwtH/j9jK3kl0+01ZNz1pi+41Q=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=DEsDe0I0+M3nQh/OPPwjTBOgBjmDk448rQXBAIwAwdvl0gsCdevRCb0GdTTyC1HZ/ mu+rZYmTSEYO+yZ3JplfhFbWiPJhV8cP+etPbDzvgQTPsm97s4QbyudXVERXUvErYN Wt9wVHx3d1cT6Gz0qDvd0UAzdXHoFBq2Wa8xJYIJqsi/zaavSwEHb3PZQpMCPHNe2x q6kZUKWuVmPrq49hvF4gN9fFouEL/AQUneV7oAhhiJhDduoKXwAy5yAuWNJHmhSULw nSKaWb+jIATFRWXSS6fCFUAloJqsmQZNrAn9F1cl06P5HiuWo/gZj4rQdD9yo3FHct oA+cU9yLsEHcw== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 1/6] ARM: dts: omap: Fixup GPMC child nodes Date: Thu, 2 Sep 2021 12:56:04 +0300 Message-Id: <20210902095609.16583-2-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Fixes up the GPMC child nodes to prevent dtbs_check errors after device tree binding conversion to yaml. - Use reg address as node name - gpmc,cycle2cycle-samecsen and gpmc,cycle2cycle-diffcsen are boolean properties. Signed-off-by: Roger Quadros --- .../boot/dts/logicpd-som-lv-baseboard.dtsi | 2 +- .../boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +- .../boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 62 +++++++++---------- arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 59 +++++++++--------- arch/arm/boot/dts/omap-zoom-common.dtsi | 16 ++--- arch/arm/boot/dts/omap2430-sdp.dts | 6 +- arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 6 +- .../arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +- arch/arm/boot/dts/omap3-evm-37xx.dts | 1 + arch/arm/boot/dts/omap3-evm-common.dtsi | 9 --- .../boot/dts/omap3-evm-processor-common.dtsi | 5 +- arch/arm/boot/dts/omap3-evm.dts | 1 + arch/arm/boot/dts/omap3-igep0020-common.dtsi | 5 +- arch/arm/boot/dts/omap3-ldp.dts | 5 +- arch/arm/boot/dts/omap3-n900.dts | 2 +- .../dts/omap3-overo-chestnut43-common.dtsi | 6 +- .../arm/boot/dts/omap3-overo-tobi-common.dtsi | 6 +- .../boot/dts/omap3-overo-tobiduo-common.dtsi | 8 +-- arch/arm/boot/dts/omap3-sb-t35.dtsi | 4 +- arch/arm/boot/dts/omap4-duovero-parlor.dts | 6 +- 21 files changed, 105 insertions(+), 112 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 7d0468a23781..f2364cb114c5 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -65,7 +65,7 @@ 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */ 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */ - ethernet@gpmc { + gpmc_ethernet: ethernet@1,0 { pinctrl-names = "default"; pinctrl-0 = <&lan9221_pins>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 5532db04046c..6357915d207b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -4,8 +4,8 @@ #include "omap36xx.dtsi" #include "logicpd-torpedo-som.dtsi" -#include "omap-gpmc-smsc9221.dtsi" #include "logicpd-torpedo-baseboard.dtsi" +#include "omap-gpmc-smsc9221.dtsi" / { model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 533a47bc4a53..05049a34b6f1 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -95,7 +95,7 @@ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ - ethernet@gpmc { + gpmc_ethernet: ethernet@1,0 { pinctrl-names = "default"; pinctrl-0 = <&lan9221_pins>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ded7e8fec9eb..2a462cb65a7d 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -20,36 +20,34 @@ }; }; -&gpmc { - ethernet@gpmc { - compatible = "smsc,lan9221", "smsc,lan9115"; - bank-width = <2>; - gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; - gpmc,cs-on-ns = <5>; - gpmc,cs-rd-off-ns = <150>; - gpmc,cs-wr-off-ns = <150>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <15>; - gpmc,adv-wr-off-ns = <40>; - gpmc,oe-on-ns = <45>; - gpmc,oe-off-ns = <140>; - gpmc,we-on-ns = <45>; - gpmc,we-off-ns = <140>; - gpmc,rd-cycle-ns = <155>; - gpmc,wr-cycle-ns = <155>; - gpmc,access-ns = <120>; - gpmc,page-burst-access-ns = <20>; - gpmc,bus-turnaround-ns = <75>; - gpmc,cycle2cycle-delay-ns = <75>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wr-access-ns = <0>; - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; - }; +&gpmc_ethernet { + compatible = "smsc,lan9221", "smsc,lan9115"; + bank-width = <2>; + gpmc,device-width = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <150>; + gpmc,cs-wr-off-ns = <150>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <140>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <140>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <120>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <75>; + gpmc,cycle2cycle-delay-ns = <75>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index 7f6aefd13451..c1e78f929d2b 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -24,36 +24,33 @@ }; }; -&gpmc { - ethernet@gpmc { - compatible = "smsc,lan9221","smsc,lan9115"; - bank-width = <2>; +&gpmc_ethernet { + compatible = "smsc,lan9221","smsc,lan9115"; + bank-width = <2>; + gpmc,mux-add-data = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <42>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <42>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <36>; + gpmc,rd-cycle-ns = <60>; + gpmc,wr-cycle-ns = <54>; + gpmc,access-ns = <36>; + gpmc,page-burst-access-ns = <0>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wr-data-mux-bus-ns = <18>; + gpmc,wr-access-ns = <42>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <42>; - gpmc,cs-wr-off-ns = <36>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <12>; - gpmc,adv-wr-off-ns = <12>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <42>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <36>; - gpmc,rd-cycle-ns = <60>; - gpmc,wr-cycle-ns = <54>; - gpmc,access-ns = <36>; - gpmc,page-burst-access-ns = <0>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,wr-data-mux-bus-ns = <18>; - gpmc,wr-access-ns = <42>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; - }; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index d4ad9e58b199..47192c617cd1 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -3,8 +3,6 @@ * Common features on the Zoom debug board */ -#include "omap-gpmc-smsc911x.dtsi" - &gpmc { ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ <7 0 0x2c000000 0x01000000>; @@ -27,8 +25,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <155>; gpmc,cs-wr-off-ns = <155>; @@ -50,7 +48,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + uart@3,100 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +59,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + uart@3,200 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +70,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + uart@3,300 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; @@ -84,9 +82,11 @@ current-speed = <115200>; }; - ethernet@gpmc { + gpmc_ethernet: ethernet@7,0 { reg = <7 0 0xff>; interrupt-parent = <&gpio5>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ }; }; + +#include "omap-gpmc-smsc911x.dtsi" diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 7d27e907533f..f74906e4721b 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -34,7 +34,7 @@ &gpmc { ranges = <5 0 0x08000000 0x01000000>; - ethernet@gpmc { + ethernet@5,300 { compatible = "smsc,lan91c94"; interrupt-parent = <&gpio5>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */ @@ -43,8 +43,8 @@ gpmc,sync-clk-ps = <0>; gpmc,mux-add-data = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <187>; gpmc,cs-wr-off-ns = <187>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 5e8943539fcc..2059463de9d6 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -47,13 +47,11 @@ }; }; -#include "omap-gpmc-smsc911x.dtsi" - &gpmc { ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ - smsc1: ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { compatible = "smsc,lan9221", "smsc,lan9115"; pinctrl-names = "default"; pinctrl-0 = <&smsc1_pins>; @@ -63,6 +61,8 @@ }; }; +#include "omap-gpmc-smsc911x.dtsi" + &i2c1 { twl: twl@48 { reg = <0x48>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 2c19d6e255bd..5e55198e4576 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -267,8 +267,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <0>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <180>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index c9332195d096..077b1a19f171 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -7,6 +7,7 @@ #include "omap36xx.dtsi" #include "omap3-evm-common.dtsi" #include "omap3-evm-processor-common.dtsi" +#include "omap-gpmc-smsc911x.dtsi" / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 17c89df6ce6b..2f7bdb248a51 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -4,7 +4,6 @@ */ #include -#include "omap-gpmc-smsc911x.dtsi" / { cpus { @@ -182,14 +181,6 @@ power = <50>; }; -&gpmc { - ethernet@gpmc { - interrupt-parent = <&gpio6>; - interrupts = <16 8>; - reg = <5 0 0xff>; - }; -}; - &vaux2 { regulator-name = "usb_1v8"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi index e6ba30a21166..3adb967b96c4 100644 --- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -217,8 +217,11 @@ ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */ - ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { pinctrl-names = "default"; pinctrl-0 = <&smsc911x_pins>; + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + reg = <5 0 0xff>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 5cc0cf7cd16c..805856d47cda 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -7,6 +7,7 @@ #include "omap34xx.dtsi" #include "omap3-evm-common.dtsi" #include "omap3-evm-processor-common.dtsi" +#include "omap-gpmc-smsc911x.dtsi" / { model = "TI OMAP35XX EVM (TMDSEVM3530)"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 73d8f471b9ec..104df84ea720 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -7,7 +7,6 @@ */ #include "omap3-igep.dtsi" -#include "omap-gpmc-smsc9221.dtsi" / { @@ -217,7 +216,7 @@ ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */ - ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { pinctrl-names = "default"; pinctrl-0 = <&smsc9221_pins>; reg = <5 0 0xff>; @@ -226,6 +225,8 @@ }; }; +#include "omap-gpmc-smsc9221.dtsi" + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9c6a92724590..a299f04217fd 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -6,7 +6,6 @@ #include #include "omap34xx.dtsi" -#include "omap-gpmc-smsc911x.dtsi" / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; @@ -148,13 +147,15 @@ }; }; - ethernet@gpmc { + gpmc_ethernet: ethernet@1,0 { interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_LOW>; reg = <1 0 0xff>; }; }; +#include "omap-gpmc-smsc911x.dtsi" + &i2c1 { clock-frequency = <2600000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 32335d4ce478..35602d7876aa 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -936,7 +936,7 @@ }; /* Ethernet is on some early development boards and qemu */ - ethernet@gpmc { + ethernet@1,0 { compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 2d2c61d7aa86..34b805851dd2 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -49,16 +49,16 @@ }; }; -#include "omap-gpmc-smsc9221.dtsi" - &gpmc { - ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ }; }; +#include "omap-gpmc-smsc9221.dtsi" + &lis33de { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9bf4b88a4b50..895803654e3c 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -21,16 +21,16 @@ }; }; -#include "omap-gpmc-smsc9221.dtsi" - &gpmc { - ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ }; }; +#include "omap-gpmc-smsc9221.dtsi" + &lis33de { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index e5da3bc6f105..c212d72dcfe9 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -9,10 +9,8 @@ #include "omap3-overo-common-peripherals.dtsi" -#include "omap-gpmc-smsc9221.dtsi" - &gpmc { - smsc1: ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ @@ -22,7 +20,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; @@ -54,6 +52,8 @@ }; }; +#include "omap-gpmc-smsc9221.dtsi" + &lis33de { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index fb9842fa922c..5ec0893415e0 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -108,8 +108,8 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <150>; gpmc,cs-wr-off-ns = <150>; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index b294c22177cb..dfc50764c405 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -131,12 +131,10 @@ status = "disabled"; }; -#include "omap-gpmc-smsc911x.dtsi" - &gpmc { ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { + gpmc_ethernet: ethernet@5,0 { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ @@ -170,6 +168,8 @@ }; }; +#include "omap-gpmc-smsc911x.dtsi" + &dss { status = "okay"; }; From patchwork Thu Sep 2 09:56:05 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506123 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 26AACC432BE for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0BE1B60295 for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343546AbhIBJ5W (ORCPT ); Thu, 2 Sep 2021 05:57:22 -0400 Received: from mail.kernel.org ([198.145.29.99]:39146 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S245531AbhIBJ5T (ORCPT ); Thu, 2 Sep 2021 05:57:19 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 78B2F61041; Thu, 2 Sep 2021 09:56:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576580; bh=b1AWLEN5psnrretJ8whMPnEaNkPAqn9QrCuQz7yJRkw=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Ex7H2lJQ8EhQM/jIZbCawC2dxCcvxSqaDA+w5Pk1c+a8HuJopETf9UszjAlBmm0sj N9XRARVlYYII5gA0yAAcZ+uZ4UQleuQ+2heXEscsHWuc9g21WggrT9n2GHLpQlhUVB LRdAsgZ2WKmG7r1bLqVxHt84A8WWgFML1yR2iYG6ts1I8mSnzbEqzXGBjIy1io4ujL 8MPYKbaqHjOhtd+SYggibuMXkZ7ihsHaKAqZ+jkUobQzH24WbwUq4X/IqIU0cbmucV MCwhcKckUFvIQ2o3WqLdSfl/cjVdGJbXY5bkvLEuEqTWp8XZ6Wbcnp+RnRZcz0BWK2 1FaRlsF/Skl3g== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 2/6] dt-bindings: memory-controllers: ti, gpmc: Convert to yaml Date: Thu, 2 Sep 2021 12:56:05 +0300 Message-Id: <20210902095609.16583-3-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Convert omap-gpmc.txt to ti,gpmc.yaml. Signed-off-by: Roger Quadros --- .../bindings/memory-controllers/omap-gpmc.txt | 157 -------- .../bindings/memory-controllers/ti,gpmc.yaml | 364 ++++++++++++++++++ .../devicetree/bindings/mtd/gpmc-nand.txt | 2 +- .../devicetree/bindings/mtd/gpmc-nor.txt | 4 +- .../devicetree/bindings/mtd/gpmc-onenand.txt | 2 +- .../devicetree/bindings/net/gpmc-eth.txt | 4 +- 6 files changed, 370 insertions(+), 163 deletions(-) delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt deleted file mode 100644 index c1359f4d48d7..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +++ /dev/null @@ -1,157 +0,0 @@ -Device tree bindings for OMAP general purpose memory controllers (GPMC) - -The actual devices are instantiated from the child nodes of a GPMC node. - -Required properties: - - - compatible: Should be set to one of the following: - - ti,omap2420-gpmc (omap2420) - ti,omap2430-gpmc (omap2430) - ti,omap3430-gpmc (omap3430 & omap3630) - ti,omap4430-gpmc (omap4430 & omap4460 & omap543x) - ti,am3352-gpmc (am335x devices) - - - reg: A resource specifier for the register space - (see the example below) - - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is - completed. - - #address-cells: Must be set to 2 to allow memory address translation - - #size-cells: Must be set to 1 to allow CS address passing - - gpmc,num-cs: The maximum number of chip-select lines that controller - can support. - - gpmc,num-waitpins: The maximum number of wait pins that controller can - support. - - ranges: Must be set up to reflect the memory layout with four - integer values for each chip-select line in use: - - 0 - - Currently, calculated values derived from the contents - of the per-CS register GPMC_CONFIG7 (as set up by the - bootloader) are used for the physical address decoding. - As this will change in the future, filling correct - values here is a requirement. - - interrupt-controller: The GPMC driver implements and interrupt controller for - the NAND events "fifoevent" and "termcount" plus the - rising/falling edges on the GPMC_WAIT pins. - The interrupt number mapping is as follows - 0 - NAND_fifoevent - 1 - NAND_termcount - 2 - GPMC_WAIT0 pin edge - 3 - GPMC_WAIT1 pin edge, and so on. - - interrupt-cells: Must be set to 2 - - gpio-controller: The GPMC driver implements a GPIO controller for the - GPMC WAIT pins that can be used as general purpose inputs. - 0 maps to GPMC_WAIT0 pin. - - gpio-cells: Must be set to 2 - -Required properties when using NAND prefetch dma: - - dmas GPMC NAND prefetch dma channel - - dma-names Must be set to "rxtx" - -Timing properties for child nodes. All are optional and default to 0. - - - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: - - gpmc,cs-on-ns: Assertion time - - gpmc,cs-rd-off-ns: Read deassertion time - - gpmc,cs-wr-off-ns: Write deassertion time - - ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: - - gpmc,adv-on-ns: Assertion time - - gpmc,adv-rd-off-ns: Read deassertion time - - gpmc,adv-wr-off-ns: Write deassertion time - - gpmc,adv-aad-mux-on-ns: Assertion time for AAD - - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD - - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD - - WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,we-on-ns Assertion time - - gpmc,we-off-ns: Deassertion time - - OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,oe-on-ns: Assertion time - - gpmc,oe-off-ns: Deassertion time - - gpmc,oe-aad-mux-on-ns: Assertion time for AAD - - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD - - Access time and cycle time timings (in nanoseconds) corresponding to - GPMC_CONFIG5: - - gpmc,page-burst-access-ns: Multiple access word delay - - gpmc,access-ns: Start-cycle to first data valid delay - - gpmc,rd-cycle-ns: Total read cycle time - - gpmc,wr-cycle-ns: Total write cycle time - - gpmc,bus-turnaround-ns: Turn-around time between successive accesses - - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses - - gpmc,clk-activation-ns: GPMC clock activation time - - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid - data - -Boolean timing parameters. If property is present parameter enabled and -disabled if omitted: - - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock - - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock - - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive - accesses to a different CS - - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive - accesses to the same CS - - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock - - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock - - gpmc,time-para-granularity: Multiply all access times by 2 - -The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access-ns: In synchronous write mode, for single or - burst accesses, defines the number of - GPMC_FCLK cycles from start access time - to the GPMC_CLK rising edge used by the - memory device for the first data capture. - - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies - the time when the first data is driven on - the address-data bus. - -GPMC chip-select settings properties for child nodes. All are optional. - -- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. -- gpmc,burst-wrap Enables wrap bursting -- gpmc,burst-read Enables read page/burst mode -- gpmc,burst-write Enables write page/burst mode -- gpmc,device-width Total width of device(s) connected to a GPMC - chip-select in bytes. The GPMC supports 8-bit - and 16-bit devices and so this property must be - 1 or 2. -- gpmc,mux-add-data Address and data multiplexing configuration. - Valid values are 1 for address-address-data - multiplexing mode and 2 for address-data - multiplexing mode. -- gpmc,sync-read Enables synchronous read. Defaults to asynchronous - is this is not set. -- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous - is this is not set. -- gpmc,wait-pin Wait-pin used by client. Must be less than - "gpmc,num-waitpins". -- gpmc,wait-on-read Enables wait monitoring on reads. -- gpmc,wait-on-write Enables wait monitoring on writes. - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - - /* child nodes go here */ - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml new file mode 100644 index 000000000000..b7d43370a95d --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -0,0 +1,364 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC Memory Controller device-tree bindings + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + The GPMC is a unified memory controller dedicated for interfacing + with external memory devices like + - Asynchronous SRAM-like memories and ASICs + - Asynchronous, synchronous, and page mode burst NOR flash + - NAND flash + - Pseudo-SRAM devices + +properties: + compatible: + items: + - enum: + - ti,omap2420-gpmc + - ti,omap2430-gpmc + - ti,omap3430-gpmc + - ti,omap4430-gpmc + - ti,am3352-gpmc + + reg: + items: + - description: + Configuration registers for the controller. + + interrupts: true + + clocks: + maxItems: 1 + description: | + Functional clock. Used for bus timing calculations and + GPMC configuration. + + clock-names: + items: + - const: fck + + dmas: + items: + - description: DMA channel for GPMC NAND prefetch + + dma-names: + items: + - const: rxtx + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + gpmc,num-cs: + description: maximum number of supported chip-select lines. + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,num-waitpins: + description: maximum number of supported wait pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + ranges: + minItems: 1 + description: | + Must be set up to reflect the memory layout with four + integer values for each chip-select line in use, + 0 + + items: + - description: NAND bank 0 + - description: NOR/SRAM bank 0 + - description: NOR/SRAM bank 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: + description: | + The GPMC driver implements and interrupt controller for + the NAND events "fifoevent" and "termcount" plus the + rising/falling edges on the GPMC_WAIT pins. + The interrupt number mapping is as follows + 0 - NAND_fifoevent + 1 - NAND_termcount + 2 - GPMC_WAIT0 pin edge + 3 - GPMC_WAIT1 pin edge, and so on. + + '#gpio-cells': + const: 2 + + gpio-controller: + description: | + The GPMC driver implements a GPIO controller for the + GPMC WAIT pins that can be used as general purpose inputs. + 0 maps to GPMC_WAIT0 pin. + + ti,hwmods: + description: + Name of the HWMOD associated with GPMC. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + ti,no-idle-on-init: + description: + Prevent idling the module at init. This is for legacy omap2/3 + platforms only. + type: boolean + deprecated: true + +patternProperties: +# "@[0-3],[a-f0-9]+$": + "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$": + type: object + description: | + The child device node represents the device connected to the GPMC + bus. The device can be a NAND controller, SRAM device, NOR device + or an ASIC. + + properties: + compatible: + description: + Compatible of attached device. + + reg: + items: + - description: Register access space for the device + +# GPMC Timing properties for child nodes. All are optional and default to 0. + + gpmc,sync-clk-ps: + description: Minimum clock period for synchronous mode, in picoseconds + $ref: /schemas/types.yaml#/definitions/uint32 + +# Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: + gpmc,cs-on-ns: + description: Assertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,cs-rd-off-ns: + description: Read deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,cs-wr-off-ns: + description: Write deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + +# ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: + gpmc,adv-on-ns: + description: Assertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,adv-rd-off-ns: + description: Read deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,adv-wr-off-ns: + description: Write deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,adv-aad-mux-on-ns: + description: Assertion time for AAD + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,adv-aad-mux-rd-off-ns: + description: Read deassertion time for AAD + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,adv-aad-mux-wr-off-ns: + description: Write deassertion time for AAD + $ref: /schemas/types.yaml#/definitions/uint32 + +# WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + gpmc,we-on-ns: + description: Assertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,we-off-ns: + description: Deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + +# OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + gpmc,oe-on-ns: + description: Assertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,oe-off-ns: + description: Deassertion time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,oe-aad-mux-on-ns: + description: Assertion time for AAD + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,oe-aad-mux-off-ns: + description: Deassertion time for AAD + $ref: /schemas/types.yaml#/definitions/uint32 + +# Access time and cycle time timings (in nanoseconds) corresponding to +# GPMC_CONFIG5: + gpmc,page-burst-access-ns: + description: Multiple access word delay + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,access-ns: + description: Start-cycle to first data valid delay + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,rd-cycle-ns: + description: Total read cycle time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,wr-cycle-ns: + description: Total write cycle time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,bus-turnaround-ns: + description: Turn-around time between successive accesses + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,cycle2cycle-delay-ns: + description: Delay between chip-select pulses + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,clk-activation-ns: + description: GPMC clock activation time + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,wait-monitoring-ns: + description: Start of wait monitoring with regard to valid data + $ref: /schemas/types.yaml#/definitions/uint32 + +# Boolean timing parameters. If property is present, parameter is enabled +# otherwise disabled. + gpmc,adv-extra-delay: + description: ADV signal is delayed by half GPMC clock + type: boolean + gpmc,cs-extra-delay: + description: CS signal is delayed by half GPMC clock + type: boolean + gpmc,cycle2cycle-diffcsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to a different CS + type: boolean + gpmc,cycle2cycle-samecsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to the same CS + type: boolean + gpmc,oe-extra-delay: + description: OE signal is delayed by half GPMC clock + type: boolean + gpmc,we-extra-delay: + description: WE signal is delayed by half GPMC clock + type: boolean + gpmc,time-para-granularity: + description: Multiply all access times by 2 + type: boolean + +# The following two properties are applicable only to OMAP3+ and AM335x: + gpmc,wr-access-ns: + description: | + In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,wr-data-mux-bus-ns: + description: | + In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + $ref: /schemas/types.yaml#/definitions/uint32 + +# GPMC chip-select settings properties for child nodes. All are optional. + + gpmc,burst-length: + description: Page/burst length. Must be 4, 8 or 16. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [4, 8, 16] + gpmc,burst-wrap: + description: Enables wrap bursting + type: boolean + gpmc,burst-read: + description: Enables read page/burst mode + type: boolean + gpmc,burst-write: + description: Enables write page/burst mode + type: boolean + gpmc,device-width: + description: | + Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + gpmc,mux-add-data: + description: | + Address and data multiplexing configuration. + Valid values are: + 0 for Non multiplexed mode + 1 for address-address-data multiplexing mode and + 2 for address-data multiplexing mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + gpmc,sync-read: + description: | + Enables synchronous read. Defaults to asynchronous + is this is not set. + type: boolean + gpmc,sync-write: + description: | + Enables synchronous writes. Defaults to asynchronous + is this is not set. + type: boolean + gpmc,wait-pin: + description: | + Wait-pin used by client. Must be less than "gpmc,num-waitpins". + $ref: /schemas/types.yaml#/definitions/uint32 + gpmc,wait-on-read: + description: Enables wait monitoring on reads. + type: boolean + gpmc,wait-on-write: + description: Enables wait monitoring on writes. + type: boolean + + required: + - reg + +required: + - compatible + - reg + - gpmc,num-cs + - gpmc,num-waitpins + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 44919d48d241..e439949d49e6 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "nand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml For NAND specific properties such as ECC modes or bus width, please refer to Documentation/devicetree/bindings/mtd/nand-controller.yaml diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index c8567b40fe13..c9bea106ea65 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -5,7 +5,7 @@ child nodes of the GPMC controller with a name of "nor". All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Required properties: - bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and @@ -28,7 +28,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Optional properties for partition table parsing: - #address-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index e9f01a963a0a..0da78cc4ccca 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "onenand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Required properties: diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index 32821066a85b..5e2f610455fa 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name. All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation @@ -43,7 +43,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Example: From patchwork Thu Sep 2 09:56:06 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506867 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 34019C4320A for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1C12060724 for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343632AbhIBJ5X (ORCPT ); Thu, 2 Sep 2021 05:57:23 -0400 Received: from mail.kernel.org ([198.145.29.99]:39200 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S245753AbhIBJ5V (ORCPT ); Thu, 2 Sep 2021 05:57:21 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 3441A60295; Thu, 2 Sep 2021 09:56:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576583; bh=0Boj15RrTV5CBpqaHeprluY+cJRS6ZFYEVal1ZnEoLc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=m5g4SCwrBZ+ivuWamoyMd1Ac1jjYMN+3tY7iiHeFBRNDAHLxf8GJJVSCzg0k0uLU8 bmTpCJQeXTdO6TuYiS0reFKaxkBUkD1MatsLbUAjFkiu51TIoT1nf7aeh8B4gdk0Vc 3Um8obsiRDqSOK4OqfMsOy7FoUULpVUlaL1Yb5W2GPyp3c2zjBdc1Wx2FrtFCrNUu0 wG7iO++n+tmue3fN4Tuc5/iiajDUNjWZ9ee3zyXaMKsKTv4/gGhIQ1j3G1W0cSJVpM efx/1m4RZLqgQ4Aeods0LFY4UBtCgHCJmrVhE8uJFxJS2oqmMRv7XtIUrcFpQX59+4 2upNGR3GWWMZQ== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 3/6] dt-bindings: mtd: ti,gpmc-nand: Convert to yaml Date: Thu, 2 Sep 2021 12:56:06 +0300 Message-Id: <20210902095609.16583-4-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Convert gpmc-nand.txt to ti,gpmc-nand.yaml. Signed-off-by: Roger Quadros --- .../devicetree/bindings/mtd/gpmc-nand.txt | 147 ------------------ .../devicetree/bindings/mtd/ti,gpmc-nand.yaml | 109 +++++++++++++ 2 files changed, 109 insertions(+), 147 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/gpmc-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt deleted file mode 100644 index e439949d49e6..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ /dev/null @@ -1,147 +0,0 @@ -Device tree bindings for GPMC connected NANDs - -GPMC connected NAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "nand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -For NAND specific properties such as ECC modes or bus width, please refer to -Documentation/devicetree/bindings/mtd/nand-controller.yaml - - -Required properties: - - - compatible: "ti,omap2-nand" - - reg: range id (CS number), base offset and length of the - NAND I/O space - - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount. - -Optional properties: - - - nand-bus-width: Set this numeric value to 16 if the hardware - is wired that way. If not specified, a bus - width of 8 is assumed. - - - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" 1-bit Hamming ecc code via software - "hw" use "ham1" instead - "hw-romcode" use "ham1" instead - "ham1" 1-bit Hamming ecc code - "bch4" 4-bit BCH ecc code - "bch8" 8-bit BCH ecc code - "bch16" 16-bit BCH ECC code - Refer below "How to select correct ECC scheme for your device ?" - - - ti,nand-xfer-type: A string setting the data transfer type. One of: - - "prefetch-polled" Prefetch polled mode (default) - "polled" Polled mode, without prefetch - "prefetch-dma" Prefetch enabled DMA mode - "prefetch-irq" Prefetch enabled irq mode - - - elm_id: use "ti,elm-id" instead - - ti,elm-id: Specifies phandle of the ELM devicetree node. - ELM is an on-chip hardware engine on TI SoC which is used for - locating ECC errors for BCHx algorithms. SoC devices which have - ELM hardware engines should specify this device node in .dtsi - Using ELM for ECC error correction frees some CPU cycles. - - rb-gpios: GPIO specifier for the ready/busy# pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x36c>; - interrupts = <100>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */ - elm_id = <&elm>; - interrupt-controller; - #interrupt-cells = <2>; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>; - nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; - -How to select correct ECC scheme for your device ? --------------------------------------------------- -Higher ECC scheme usually means better protection against bit-flips and -increased system lifetime. However, selection of ECC scheme is dependent -on various other factors also like; - -(1) support of built in hardware engines. - Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot - support ecc-schemes with hardware error-correction (BCHx_HW). However - such SoC can use ecc-schemes with software library for error-correction - (BCHx_HW_DETECTION_SW). The error correction capability with software - library remains equivalent to their hardware counter-part, but there is - slight CPU penalty when too many bit-flips are detected during reads. - -(2) Device parameters like OOBSIZE. - Other factor which governs the selection of ecc-scheme is oob-size. - Higher ECC schemes require more OOB/Spare area to store ECC syndrome, - so the device should have enough free bytes available its OOB/Spare - area to accommodate ECC for entire page. In general following expression - helps in determining if given device can accommodate ECC syndrome: - "2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE" - where - OOBSIZE number of bytes in OOB/spare area - PAGESIZE number of bytes in main-area of device page - ECC_BYTES number of ECC bytes generated to protect - 512 bytes of data, which is: - '3' for HAM1_xx ecc schemes - '7' for BCH4_xx ecc schemes - '14' for BCH8_xx ecc schemes - '26' for BCH16_xx ecc schemes - - Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which is greater than capacity of NAND device (OOBSIZE=64) - Hence, BCH16 cannot be supported on given device. But it can - probably use lower ecc-schemes like BCH8. - - Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accommodated in the OOB/Spare area of this device - (OOBSIZE=128). So this device can use BCH16 ecc-scheme. diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml new file mode 100644 index 000000000000..31a0c673b0e5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC NAND Flash controller. + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + GPMC NAND controller/Flash is represented as a child of the + GPMC controller node. + + All GPMC timing relevant properties and generic GPMC child properties + are explained in + Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml + + For NAND specific properties such as ECC modes, bus width, RB GPIO, etc, + please refer to + Documentation/devicetree/bindings/mtd/nand-controller.yaml + +properties: + compatible: + const: ti,omap2-nand + + reg: + items: + - description: + Chip Select number, register offset and size of + NAND register window. + + interrupts: + items: + - description: Interrupt for fifoevent + - description: Interrupt for termcount + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ti,nand-ecc-opt: + description: Desired ECC algorithm + $ref: /schemas/types.yaml#/definitions/string + enum: [sw, ham1, bch4, bch8, bch16] + + ti,nand-xfer-type: + description: Data transfer method between controller and chip. + $ref: /schemas/types.yaml#/definitions/string + enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq] + + ti,elm-id: + description: + phandle to the ELM (Error Location Module). + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + #include + #include + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + clocks = <&l3s_gclk>; + clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = ; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + #address-cells = <1>; + #size-cells = <1>; + + /* NAND generic properties */ + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + + /* GPMC properties*/ + gpmc,device-width = <1>; + }; + }; From patchwork Thu Sep 2 09:56:07 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506866 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 96834C4320E for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6ED91610FA for ; Thu, 2 Sep 2021 09:56:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343812AbhIBJ50 (ORCPT ); Thu, 2 Sep 2021 05:57:26 -0400 Received: from mail.kernel.org ([198.145.29.99]:39332 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1343723AbhIBJ5Y (ORCPT ); Thu, 2 Sep 2021 05:57:24 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id BBAB761090; Thu, 2 Sep 2021 09:56:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576585; bh=Q0LIPQvXy4Qbvq7k78WLCwV4gbJDUmFfKPPMh096G/4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=CK9C4I9ZIGwNwMB4jnFQLPVN8zyBIV+WpHqagpZXSCN63QIfd9SEHvhXVUPgGhEsm xlI5r+qxTdPPPnT4laSu7WdQnqyrmy2jzLbbeBySnW6x++jGtQNpyTzdxGmin2aHFK /gddYu2Lz5vumAn59TTDnIQmXPivNeqSPcnt5mIPylriC0qdbCtNBaIr00soljz+nH CQIoj1lOs+HY11pnNYJ0gNgGDkwiml+DrCFyNrzNqyotHLoRrtXW7ycIz0gucfymR0 LCkM5LlBZ1MlVvmri8fJyGxss6sX3B9T4N/NS/Z6rhRvRNweOSg85exIapcrerTHLf /zpejmsfhpxBg== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 4/6] dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml Date: Thu, 2 Sep 2021 12:56:07 +0300 Message-Id: <20210902095609.16583-5-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Convert gpmc-onenand.txt to ti,gpmc-onenand.yaml. Signed-off-by: Roger Quadros --- .../devicetree/bindings/mtd/gpmc-onenand.txt | 48 ------------- .../bindings/mtd/ti,gpmc-onenand.yaml | 71 +++++++++++++++++++ 2 files changed, 71 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/gpmc-onenand.txt create mode 100644 Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt deleted file mode 100644 index 0da78cc4ccca..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ /dev/null @@ -1,48 +0,0 @@ -Device tree bindings for GPMC connected OneNANDs - -GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "onenand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -Required properties: - - - compatible: "ti,omap2-onenand" - - reg: The CS line the peripheral is connected to - - gpmc,device-width: Width of the ONENAND device connected to the GPMC - in bytes. Must be 1 or 2. - -Optional properties: - - - int-gpios: GPIO specifier for the INT pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an OMAP3430 board: - - gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - onenand@0 { - compatible = "ti,omap2-onenand"; - reg = <0 0 0>; /* CS0, offset 0 */ - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml new file mode 100644 index 000000000000..5b0d2b549919 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OneNAND over Texas Instruments GPMC bus. + +maintainers: + - Tony Lindgren + - Roger Quadros + +description: + + GPMC connected OneNAND (found on OMAP boards) are represented + as child nodes of the GPMC controller. + + All timing relevant properties as well as generic gpmc child properties are + explained in + Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml + +properties: + compatible: + const: ti,omap2-onenand + + reg: + items: + - description: | + Chip Select number, register offset and size of + OneNAND register window. + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + int-gpios: + description: GPIO specifier for the INT pin. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: true + +examples: + - | + gpmc: memory-controller@6e000000 { + compatible = "ti,omap3430-gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ + + onenand@0,0 { + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + #address-cells = <1>; + #size-cells = <1>; + }; + }; From patchwork Thu Sep 2 09:56:08 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506122 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 12C70C4320A for ; Thu, 2 Sep 2021 09:56:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id F0D6B60724 for ; Thu, 2 Sep 2021 09:56:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343648AbhIBJ5c (ORCPT ); Thu, 2 Sep 2021 05:57:32 -0400 Received: from mail.kernel.org ([198.145.29.99]:39386 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1343791AbhIBJ50 (ORCPT ); Thu, 2 Sep 2021 05:57:26 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 4F9D96108B; Thu, 2 Sep 2021 09:56:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576588; bh=K/6VfoFPQ9qMZMEaNkK+OZgH2Dx1omVf4MYgeH69nuk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=SanjNYPui/e5sQjaDNQzDu2moZAouXPYzkzq6SnNO2uqx7KyLLBxhw3iIdqcsUMKg LIs+cpV0+ce8tOw9xHa6PWP6ywiq2B37QZW/cT0OJ7K64UVvaNNo6Pu5m5yxQT02Zo 4Locu/q3KELTQaO95hrFNchpj/I4kvBCH/1vzKhFr+OIC9UFX/BZkI61HGDkUZA1H9 /LB4DgHsRyH71jnEKQGw5PnT/sbixWJgHn5xJfV5MbARwqJ3NU94wFy20yZutbuMnY C3qVU3wQ8upLObtWgghz4pUcxDi7uPVrSsA1CiGBQSxN175YWZpkkdUxp9TrYMwsYA wNg7wH+aaMLnQ== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 5/6] dt-bindings: mtd: Remove gpmc-nor.txt Date: Thu, 2 Sep 2021 12:56:08 +0300 Message-Id: <20210902095609.16583-6-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org There is no GPMC NOR compatible or device driver. GPMC is just a bus interface over which standard (CFI/JEDC) NOR Flash chips can be attached. For NOR chip bindings, please refer to Documentation/devicetree/bindings/mtd/mtd-physmap.yaml For GPMC bus timing configuration, please refer to Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Signed-off-by: Roger Quadros --- .../devicetree/bindings/mtd/gpmc-nor.txt | 98 ------------------- 1 file changed, 98 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/gpmc-nor.txt diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt deleted file mode 100644 index c9bea106ea65..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ /dev/null @@ -1,98 +0,0 @@ -Device tree bindings for NOR flash connect to TI GPMC - -NOR flash connected to the TI GPMC (found on OMAP boards) are represented as -child nodes of the GPMC controller with a name of "nor". - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -Required properties: -- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and - 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt -- reg: Chip-select, base address (relative to chip-select) - and size of NOR flash. Note that base address will be - typically 0 as this is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -Optional properties for partition table parsing: -- #address-cells: should be set to 1 -- #size-cells: should be set to 1 - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc", "simple-bus"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x10000000 0x08000000>; - - nor@0,0 { - compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0 0x08000000>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - partition@0 { - label = "bootloader-nor"; - reg = <0 0x40000>; - }; - partition@40000 { - label = "params-nor"; - reg = <0x40000 0x40000>; - }; - partition@80000 { - label = "kernel-nor"; - reg = <0x80000 0x200000>; - }; - partition@280000 { - label = "filesystem-nor"; - reg = <0x240000 0x7d80000>; - }; - }; -}; From patchwork Thu Sep 2 09:56:09 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roger Quadros X-Patchwork-Id: 506865 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 60642C432BE for ; Thu, 2 Sep 2021 09:56:38 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3EE2B61053 for ; Thu, 2 Sep 2021 09:56:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343773AbhIBJ5d (ORCPT ); Thu, 2 Sep 2021 05:57:33 -0400 Received: from mail.kernel.org ([198.145.29.99]:39444 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1343838AbhIBJ53 (ORCPT ); Thu, 2 Sep 2021 05:57:29 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id DA56161053; Thu, 2 Sep 2021 09:56:28 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1630576591; bh=rfkEFGB6wXC4Vhat677/3SdiQMJ5CiswCpBDyoWEuyA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=pMOe5VLsIs//H0NdGEBwTSVx5L+DccA0i2CxCN/PTtcS37dQDQW2gfK+N+2sAGO5Z WdDG+8Sqm6l+No0NmtkW4/o6FCzJD0F3wf7Zrc0FbFkzWEeUuS+1nP8lZY5bJ4/BiL aKJHGTDvKPSAHBE8KuIZwhFyJGYtKy7XGsV9Tdxj65gBzXgqrbImIVxjl87dmPhGfk 6a8CoaQd1JYu+5XS9MZTrk/X7I68nK3P82AqRFhBjWn7hA3x5KbMZ7OZ7/QKCdVEE6 JjHGzqAVJclCG3ebAJRixW75Tmb8ztrpmSC+GZWmog+g7JO3p5Z0LhnAGPyTcs540a cK31RGdI2BdCw== From: Roger Quadros To: tony@atomide.com Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com, miquel.raynal@bootlin.com, nm@ti.com, lokeshvutla@ti.com, devicetree@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros Subject: [PATCH v2 6/6] dt-bindings: net: Remove gpmc-eth.txt Date: Thu, 2 Sep 2021 12:56:09 +0300 Message-Id: <20210902095609.16583-7-rogerq@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210902095609.16583-1-rogerq@kernel.org> References: <20210902095609.16583-1-rogerq@kernel.org> Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org There is no GPMC Ethernet compatible or device driver. GPMC is just a bus interface over which devices like Ethernet controller can be to. For SMSC 911x Ethernet chip bindings, please refer to Documentation/devicetree/bindings/net/smsc,lan9115.yaml For GPMC bus timing configuration, please refer to Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml Signed-off-by: Roger Quadros --- .../devicetree/bindings/net/gpmc-eth.txt | 97 ------------------- 1 file changed, 97 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/gpmc-eth.txt diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt deleted file mode 100644 index 5e2f610455fa..000000000000 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ /dev/null @@ -1,97 +0,0 @@ -Device tree bindings for Ethernet chip connected to TI GPMC - -Besides being used to interface with external memory devices, the -General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices -such as ethernet controllers to processors using the TI GPMC as a data bus. - -Ethernet controllers connected to TI GPMC are represented as child nodes of -the GPMC controller with an "ethernet" name. - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -For the properties relevant to the ethernet controller connected to the GPMC -refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml - -Child nodes need to specify the GPMC bus address width using the "bank-width" -property but is possible that an ethernet controller also has a property to -specify the I/O registers address width. Even when the GPMC has a maximum 16-bit -address width, it supports devices with 32-bit word registers. -For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an -OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". - -Required properties: -- bank-width: Address width of the device in bytes. GPMC supports 8-bit - and 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns: Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- reg: Chip-select, base address (relative to chip-select) - and size of the memory mapped for the device. - Note that base address will be typically 0 as this - is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <5 0 0x2c000000 0x1000000>; - - ethernet@5,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - interrupt-parent = <&gpio6>; - interrupts = <16>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; - }; -};