From patchwork Tue Mar 15 23:35:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 551518 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9DED7C433F5 for ; Tue, 15 Mar 2022 23:37:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S242751AbiCOXis (ORCPT ); Tue, 15 Mar 2022 19:38:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41098 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238451AbiCOXir (ORCPT ); Tue, 15 Mar 2022 19:38:47 -0400 Received: from mail-lf1-x12a.google.com (mail-lf1-x12a.google.com [IPv6:2a00:1450:4864:20::12a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A000A5620B for ; Tue, 15 Mar 2022 16:37:34 -0700 (PDT) Received: by mail-lf1-x12a.google.com with SMTP id bt26so1089464lfb.3 for ; Tue, 15 Mar 2022 16:37:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=7ZIpRMUfxfN2P2Jphf5BBz91uNjdePO2QpnTEW+cZn8=; b=h7K4ipBrkcUPp40+kb4TMB4L0kfO1QGxpsLYlNBl9xg8kpitCZzCJpJwOuIMtcgWmR bBGwFVVpeqNHkhp1UODqUeTaZSmLmhP5jfwv0SJSgBhexgn3wUvIoropaw0ozbp8pBpe oRBEzAZYN/nC/FVdCv1UHO9kcj9yfdO8J48uvyTX3MG7XHjLE+uDfvQJGVzxN/lclEgk FfIRSleeNqcShYjj1aPJk3CTjs2x0qYiDOoBT1w2yscSJ7dfh/KM0c6P+eIs5MZgCnfu PcCCcUbgqCTLAiuNjoDw7EV5EXginVIGMRRrrAX/nxwUmJDj3SYk7jpYp/bgM37yiGWF nwcQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=7ZIpRMUfxfN2P2Jphf5BBz91uNjdePO2QpnTEW+cZn8=; b=Y8n0I0cALW6c+YxdwQ7aP+sKAviusQNzL5d/ZQKVVkByxcYx8pzu1y65RCNQCQhgye TpCf/1rg00OqZfR5cUzoxX99XVz3fpB47cte4vuVsEwXQm0V0tcReMwgn7iPh0F/yF+P aw35K+vT+TsKqjsKyt6xLkDazjwV0UEH6unIzhhCASRx0FHiyGyhcAiutxfVe5v8n7R8 VQKAvdnSjPQ2Gi39PPSfR63sVUUlnLNGc2EUDbAyVB8TcWL2E1/iCO/0FffKlZhUhZdR teV05KtKwqFsOB284U3DNW2wsNMND0mbLdFsqhsf1IKy4dVg/SQzBq9oYveH3QxMy1Qk 45YA== X-Gm-Message-State: AOAM530vBTGWHbnkiw8dPabukAUKNrQ6GKe6obskxRN4MB8U+uLqkpv9 juwLo/uAlj98XNecIj19N23alg== X-Google-Smtp-Source: ABdhPJzGaBMUCoamCqlgIUEPBhuiznEKx2/oynitinUTRrLY2L/zfR2xcTl2BhntaGU0Vo11+77CcQ== X-Received: by 2002:a05:6512:3ca6:b0:448:626f:b3a7 with SMTP id h38-20020a0565123ca600b00448626fb3a7mr15831589lfv.261.1647387453042; Tue, 15 Mar 2022 16:37:33 -0700 (PDT) Received: from localhost.localdomain (c-fdcc225c.014-348-6c756e10.bbcust.telenor.se. [92.34.204.253]) by smtp.gmail.com with ESMTPSA id w10-20020ac2442a000000b0044835a52a08sm29543lfl.163.2022.03.15.16.37.32 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 15 Mar 2022 16:37:32 -0700 (PDT) From: Linus Walleij To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Linus Walleij , phone-devel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH 1/3] dt-bindings: Add Immersion Corporation prefix Date: Wed, 16 Mar 2022 00:35:26 +0100 Message-Id: <20220315233528.1204930-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.35.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Immersion Corporation makes haptic feedback circuits such as the ISA1200. Cc: phone-devel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij Acked-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 294093d45a23..182771cc913d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -549,6 +549,8 @@ patternProperties: description: Imagination Technologies Ltd. "^imi,.*": description: Integrated Micro-Electronics Inc. + "^immersion,.*": + description: Immersion Corporation "^incircuit,.*": description: In-Circuit GmbH "^inet-tek,.*": From patchwork Tue Mar 15 23:35:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 552387 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E018C433FE for ; Tue, 15 Mar 2022 23:37:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238451AbiCOXix (ORCPT ); Tue, 15 Mar 2022 19:38:53 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41158 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239050AbiCOXix (ORCPT ); Tue, 15 Mar 2022 19:38:53 -0400 Received: from mail-lj1-x235.google.com (mail-lj1-x235.google.com [IPv6:2a00:1450:4864:20::235]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7E6F95AEC8 for ; Tue, 15 Mar 2022 16:37:39 -0700 (PDT) Received: by mail-lj1-x235.google.com with SMTP id z26so983426lji.8 for ; Tue, 15 Mar 2022 16:37:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=CVYvPzoQuTQyndX1sO520v6sFtpGIbDv7RumAhcyv2A=; b=Hzg2wl7SbKznScvVlXeaddmwXlGOSp7nosJ4XUzteDjw4daQ1l6NST8ZzfTr/T0FYO 1qTYRdYORB6kQLeToFoT5sBKgF6d5kHOhae5KrOLNCAl7py81vUXDN4qDB04U48UxHa8 R909eC5MLgENOvgXHycN4gW8kyXAmx5cZNG74mUpprzkhgI07wKRDyZnkgXfd8haY76S kZSSkLmB4oJCAJYz5nGIXmImXNErQo9uWg8vas9rReXIrPIPizJV63bw83T1SV0FYWH5 CrA/Y4IrPIzIdsdUSLic2pb5PonKPp0V0mMQFNgabZA7tTYC8S8Q6TGcRFPf3HQyElCL 5jNQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=CVYvPzoQuTQyndX1sO520v6sFtpGIbDv7RumAhcyv2A=; b=IV/3vwPLSQ3zmFty2bAC8CBEXqiwkCgOS0X31/2rgPI6ukM/lCPU8zI4pwtJiwqrGC uCtj6/uywPQHaYW0EPKdQV1vNG5UhEIQLa32V2HK7sjhC6swBCXrLyXzwSSZ6kDaHqCs /jT7QLRh5dLA/4AHKA7JW/Gl/wvflhhHd8xAiDfFypLiqlSY8X5ypC31jaq8SKOFU5Lm 7CZNi1X0JMYtnMMf27geiKieTtrNCR/t9ZejgXvWNVGZg7PN5m4ah/H0lnsWgusaDTn2 ocHyQNoF4xkLUUfFU70E353flI87wu0VFXUP5vZiEcXmv4g41OQGTJSXMIZqBxiN3QjA JvVA== X-Gm-Message-State: AOAM530XiNVY1+RlZCDbTqnM4R26DIq3Vqz7P3/HzTvvF0jltXGv4WCm 4D/+1TB0Aok7/Drz5Y3R4mujGnVkcnWbsA== X-Google-Smtp-Source: ABdhPJzTDJkb6i3IKFf4Ji4ubPl1ltJQWL+VjUDM0nLokqlIQHMD6dDKhRdjBZRDKijzr0CcZraT7g== X-Received: by 2002:a05:651c:11ca:b0:247:f32e:10ba with SMTP id z10-20020a05651c11ca00b00247f32e10bamr19080547ljo.208.1647387457752; Tue, 15 Mar 2022 16:37:37 -0700 (PDT) Received: from localhost.localdomain (c-fdcc225c.014-348-6c756e10.bbcust.telenor.se. [92.34.204.253]) by smtp.gmail.com with ESMTPSA id w10-20020ac2442a000000b0044835a52a08sm29543lfl.163.2022.03.15.16.37.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 15 Mar 2022 16:37:37 -0700 (PDT) From: Linus Walleij To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Linus Walleij , phone-devel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH 2/3] dt-bindings: input: Add bindings for Immersion ISA1200 Date: Wed, 16 Mar 2022 00:35:27 +0100 Message-Id: <20220315233528.1204930-2-linus.walleij@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220315233528.1204930-1-linus.walleij@linaro.org> References: <20220315233528.1204930-1-linus.walleij@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This adds device tree bindings for the Immersion ISA1200 haptic feedback unit. Cc: phone-devel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij --- .../bindings/input/immersion,isa1200.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/immersion,isa1200.yaml diff --git a/Documentation/devicetree/bindings/input/immersion,isa1200.yaml b/Documentation/devicetree/bindings/input/immersion,isa1200.yaml new file mode 100644 index 000000000000..e6bbefce74a8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/immersion,isa1200.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/immersion,isa1200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Immersion ISA1200 Haptic Feedback Unit + +maintainers: + - Linus Walleij + +description: + The Immersion ISA1200 is a haptic feedback chip using two motors of + LRA or ERM type. It can generate a PWM signal to control the motors from + a fixed input clock, or it can amplify and modify an existing PWM + input. It is communicating with the host system using I2C. + +properties: + compatible: + description: One compatible per product using this chip. Each product + need deliberate custom values for things such as LRA resonance + frequency and these are not stored in the device tree, rather we + let the operating system look up the appropriate parameters from a + table. + enum: + - immersion,isa1200-janice + - immersion,isa1200-gavini + + reg: + description: I2C address for the ISA1200 + + hen-gpios: + description: GPIO line that drives the HEN (Motor Hardware Enable) pin + on the chip. + maxItems: 1 + + len-gpios: + description: GPIO line that drives the LEN (LDO Enable) pin on the chip. + maxItems: 1 + + clocks: + description: Clock that drives the chip if using the chip to generate a + PWM from a clock. Either clocks or pwms must be defined. + maxItems: 1 + + pwms: + description: PWM that drives the chip if using an external PWM generator. + Either pwms or clocks must be defined. + maxItems: 1 + +required: + - compatible + - reg + - hen-gpios + - len-gpios + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptic@49 { + compatible = "immersion,isa1200-janice"; + reg = <0x49>; + hen-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + len-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + clocks = <&clkout_clk>; + }; + }; From patchwork Tue Mar 15 23:35:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 551517 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CA8E9C4332F for ; Tue, 15 Mar 2022 23:37:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1344673AbiCOXi5 (ORCPT ); Tue, 15 Mar 2022 19:38:57 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41196 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S245117AbiCOXiz (ORCPT ); Tue, 15 Mar 2022 19:38:55 -0400 Received: from mail-lj1-x231.google.com (mail-lj1-x231.google.com [IPv6:2a00:1450:4864:20::231]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 45BA9574A5 for ; Tue, 15 Mar 2022 16:37:41 -0700 (PDT) Received: by mail-lj1-x231.google.com with SMTP id bn33so1002922ljb.6 for ; Tue, 15 Mar 2022 16:37:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=ufNWNXL+hnkWD10DMnaNtl85CsHUW4oMweOqNJZ88TU=; b=Cox5x569iddMVVizgBcI8WPAksdJM7vNLEUlWvAhUSSwddX5jqahmRE0K5OPU18iQb WX9AxMx3W6SlGJ0qOr9hEEYZwvIDJMpJz6HVvhhGA4GyP0nVSAXOq1qGqp7RkdCX2qcC rA+oovIqbHcyITRdZriK0IRh+wf0/TkKrGWQbQmIzyvoVfIrHHQV6k97JhFwy/g7Xm9B rSRBn5AUt5aLLjHhkUPRccq0da4kc/yQJ00tZ+XCGzOUxk5bQsB7RauuBo6SQxw5kAVr VeL3fd725fWeAGSiguGZEqRc2uxy9C+Z3RWlVRUOVhjIwPTE14Mnedr+WlonZiW7eHMU eb3Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=ufNWNXL+hnkWD10DMnaNtl85CsHUW4oMweOqNJZ88TU=; b=FbP0RDF52Iw++f+4srMtbuTlhVHwzJiejEu2j9JFm4HFkwPn0TNWQ4KiJ5NA8/PVqP 0RrI3lo96pjEc879dPJHTM9WsT7Om3KApXC/fOfTOdD0Tpt5RJBhG2EniYYiaAfSQyV3 4ygNBlWDM5SjF24i/kRQRlkpc3qXM8GuAtxC3KuBb6/6wp+jzHUJSpbe6FmpBsBqGLxZ qs1muiDlq/NwOoujEYLOnGGPjjsDYgI5dIJ1fqOBSbGE6WvmHNG0CnzTCPNGoLaIoOfa 8Nt7OvAvs7S09ydNeSpaCPJ5GejiCiFmx8crQBEQZ7RhvuWHeaq5ZwfHpifpC7hdpYku V3kA== X-Gm-Message-State: AOAM5329W5Tiyqck3knoU7TI3PLdc0X3j3yaplAH6wLpJBXvSZyTe3Od /BGiF2RyHyCM8FOg9iu/oqZWaLE01gTgQA== X-Google-Smtp-Source: ABdhPJwZo9UkFkLyXUIDL9Z1AUK2h3F2pNSJXbIsJA2He5faX6H9ECedN8OxAkqTS2qCvVpJpRqY1g== X-Received: by 2002:a2e:808b:0:b0:238:ea7c:faf8 with SMTP id i11-20020a2e808b000000b00238ea7cfaf8mr18576016ljg.513.1647387459543; Tue, 15 Mar 2022 16:37:39 -0700 (PDT) Received: from localhost.localdomain (c-fdcc225c.014-348-6c756e10.bbcust.telenor.se. [92.34.204.253]) by smtp.gmail.com with ESMTPSA id w10-20020ac2442a000000b0044835a52a08sm29543lfl.163.2022.03.15.16.37.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 15 Mar 2022 16:37:39 -0700 (PDT) From: Linus Walleij To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Linus Walleij , phone-devel@vger.kernel.org Subject: [PATCH 3/3] Input: isa1200 - new driver for Immersion ISA1200 Date: Wed, 16 Mar 2022 00:35:28 +0100 Message-Id: <20220315233528.1204930-3-linus.walleij@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220315233528.1204930-1-linus.walleij@linaro.org> References: <20220315233528.1204930-1-linus.walleij@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org The ISA1200 is a haptic feedback unit from Immersion Corporation using two motors for haptic feedback in mobile phones. It is used in Samsung Galxy S Advance GT-I9070 (Janice) and Samsung Beam GT-I8350 (Gavini). Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij --- MAINTAINERS | 6 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/isa1200.c | 429 +++++++++++++++++++++++++++++++++++ 4 files changed, 447 insertions(+) create mode 100644 drivers/input/misc/isa1200.c diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..439bb72c9468 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9363,6 +9363,12 @@ IMGTEC IR DECODER DRIVER S: Orphan F: drivers/media/rc/img-ir/ +IMMERSION ISA1200 HAPTIC FEEDBACK CHIP +M: Linus Walleij +L: linux-input@vger.kernel.org +F: Documentation/devicetree/bindings/input/immersion,isa1200.yaml +F: drivers/input/misc/isa1200.c + IMON SOUNDGRAPH USB IR RECEIVER M: Sean Young L: linux-media@vger.kernel.org diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index dd5227cf8696..3a0e371a6579 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -762,6 +762,17 @@ config INPUT_IQS626A To compile this driver as a module, choose M here: the module will be called iqs626a. +config INPUT_ISA1200_HAPTIC + tristate "Immersion ISA1200 haptic feedback unit" + depends on I2C + select REGMAP_I2C + help + Say Y to enable support for the Immersion ISA1200 haptic + feedback unit. + + To compile this driver as a module, choose M here: the + module will be called isa1200. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index b92c53a6b5ae..f6987c20e516 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c new file mode 100644 index 000000000000..472058c32d42 --- /dev/null +++ b/drivers/input/misc/isa1200.c @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Immersion Corporation ISA1200 haptic feedback unit + * This chip controls two force-feedback motors + * + * This chip can use either an external clock or an external PWM + * to drive the PWM. If a clock is used, the chip will generate the + * PWM for the motor. If a PWM input is used, the chip will act as + * an amplifier for the PWM input. + * + * No datasheet exists, registers and values extracted from GPL + * code drops from various Samsung mobile phones: + * + * - Galaxy S Advance GT-I9070 + * - Galaxy Beam GT-I8350 + * + * Copyright (C) 2022 Linus Walleij + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* System control (LDO regulator) */ +#define ISA1200_SCTRL 0x00 + +#define ISA1200_LDO_VOLTAGE_23V 0x08 +#define ISA1200_LDO_VOLTAGE_24V 0x09 +#define ISA1200_LDO_VOLTAGE_25V 0x0A +#define ISA1200_LDO_VOLTAGE_26V 0x0B +#define ISA1200_LDO_VOLTAGE_27V 0x0C +#define ISA1200_LDO_VOLTAGE_28V 0x0D +#define ISA1200_LDO_VOLTAGE_29V 0x0E +#define ISA1200_LDO_VOLTAGE_30V 0x0F +#define ISA1200_LDO_VOLTAGE_31V 0x00 +#define ISA1200_LDO_VOLTAGE_32V 0x01 +#define ISA1200_LDO_VOLTAGE_33V 0x02 +#define ISA1200_LDO_VOLTAGE_34V 0x03 +#define ISA1200_LDO_VOLTAGE_35V 0x04 +#define ISA1200_LDO_VOLTAGE_36V 0x05 +#define ISA1200_LDO_VOLTAGE_37V 0x06 +#define ISA1200_LDO_VOLTAGE_38V 0x07 + +/* + * The vendor source code for the GT-I9070 states that the output + * frequency is calculated like this: + * + * base clock frequency + * fout = ----------------------------------------- + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD + * + * The base clock frequency is the clock frequency provided on the + * clock input to the chip, divided by the value in HCTRL0 + * + * PWM_FREQ is configured in register HCTRL4, it is common to set this + * to 0 to get only two variables to calculate. + * + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15) + * PWM_PERIOD is configured in register HCTRL6 + * Further the duty cycle can be configured in HCTRL5 + */ + +/* + * HCTRL0 configures clock or PWM input and selects the divider for + * the clock input. + * + * Code comments says that bits [1..0] gives the division factor. + * If the input clock is 44.8 kHz, writing 0x11 into this register + * sets the div_factor to 256 and the resulting frequency will be + * 44800/256 = 175Hz. + * + * If the PWM input mode is set the input on the clock/PWM pin is + * assumed to be a PWM already rather than a regular clock pulse. + */ +#define ISA1200_HCTRL0 0x30 +#define ISA1200_HCTRL0_PWM_GEN_ENABLE BIT(7) +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4) +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3) +#define ISA1200_HCTRL0_DIV_512 0x00 +#define ISA1200_HCTRL0_DIV_256 0x01 + +/* + * HCTRL1 configures the motor type(s) + * ERM = Excentric rotating mass + * LRA = Linear Resonant Actuator + * + * Bits [0..1] are set to 1 when using PWM input, we don't know + * why. + */ +#define ISA1200_HCTRL1 0x31 +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7) /* Else PWM in is assumed */ +#define ISA1200_HCTRL1_DAC_INVERT BIT(6) +#define ISA1200_HCTRL1_ERM BIT(5) /* Else LRA is assumed */ + +/* HCTRL2 controls software reset of the chip */ +#define ISA1200_HCTRL2 0x32 +#define ISA1200_HCTRL2_SW_RESET BIT(0) + +/* + * HCTRL3 controls the PLL divisor + * + * Bits [0,1] are always set to 1 (we don't know what they are + * used for) and bit 4 and upward control the PLL divisor. + */ +#define ISA1200_HCTRL3 0x33 +#define ISA1200_HCTRL3_DEFAULT 0x03 +#define ISA1200_HCTRL3_PLLDIV_SHIFT 4 + +/* + * HCTRL4 controls the PWM frequency + * + * Set this to 0 and ignore the duty cycle and period registers if + * PWM input mode is used. + */ +#define ISA1200_HCTRL4 0x34 + +/* HCTRL5 controls the PWM high duty cycle */ +#define ISA1200_HCTRL5 0x35 + +/* HCTRL6 controls the PWM period */ +#define ISA1200_HCTRL6 0x36 + +/* The use for these registers is unknown but they exist */ +#define ISA1200_HCTRL7 0x37 +#define ISA1200_HCTRL8 0x38 +#define ISA1200_HCTRL9 0x39 +#define ISA1200_HCTRLA 0x3A +#define ISA1200_HCTRLB 0x3B +#define ISA1200_HCTRLC 0x3C +#define ISA1200_HCTRLD 0x3D + +struct isa1200_config { + u8 ldo_voltage; + bool pwm_in; + bool erm; + u8 clkdiv; + u8 plldiv; + u8 freq; + u8 duty; + u8 period; +}; + +struct isa1200 { + const struct isa1200_config *conf; + struct input_dev *input; + struct device *dev; + struct regmap *map; + struct clk *clk; + struct gpio_desc *hen; + struct gpio_desc *len; + struct work_struct play_work; + int level; +}; + +static const struct regmap_config isa1200_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x3d, +}; + +void isa1200_start(struct isa1200 *isa) +{ + const struct isa1200_config *cfg = isa->conf; + u8 hctrl0; + u8 hctrl1; + u8 hctrl3; + + clk_prepare_enable(isa->clk); + gpiod_set_value(isa->hen, 1); + gpiod_set_value(isa->len, 1); + + udelay(200); + + regmap_write(isa->map, ISA1200_SCTRL, cfg->ldo_voltage); + + if (!cfg->pwm_in) { + hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE; + hctrl1 = ISA1200_HCTRL1_EXT_CLOCK; + } else { + hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE; + hctrl1 = 0; + } + hctrl0 |= cfg->clkdiv; + hctrl1 |= ISA1200_HCTRL1_DAC_INVERT; + if (cfg->erm) + hctrl1 |= ISA1200_HCTRL1_ERM; + + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); + regmap_write(isa->map, ISA1200_HCTRL1, hctrl1); + + /* Make sure to de-assert software reset */ + regmap_write(isa->map, ISA1200_HCTRL2, 0x00); + + /* PLL divisor */ + hctrl3 = ISA1200_HCTRL3_DEFAULT; + hctrl3 |= (cfg->plldiv << ISA1200_HCTRL3_PLLDIV_SHIFT); + regmap_write(isa->map, ISA1200_HCTRL3, hctrl3); + + /* Frequency */ + regmap_write(isa->map, ISA1200_HCTRL4, cfg->freq); + /* Duty cycle */ + regmap_write(isa->map, ISA1200_HCTRL5, cfg->duty); + /* Period */ + regmap_write(isa->map, ISA1200_HCTRL6, cfg->period); + + /* Turn on PWM generation in BIT(7) */ + hctrl0 |= ISA1200_HCTRL0_PWM_GEN_ENABLE; + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); + + /* + * This is done in the vendor tree with the commment + * "Duty 0x64 == nForce 90", and no force feedback happens + * unless we do this. + */ + regmap_write(isa->map, ISA1200_HCTRL5, 0x64); +} + +void isa1200_stop(struct isa1200 *isa) +{ + regmap_write(isa->map, ISA1200_HCTRL0, 0); + gpiod_set_value(isa->len, 0); + gpiod_set_value(isa->hen, 0); + clk_disable_unprepare(isa->clk); +} + +static void isa1200_play_work(struct work_struct *work) +{ + struct isa1200 *isa = + container_of(work, struct isa1200, play_work); + + if (isa->level) + isa1200_start(isa); + else + isa1200_stop(isa); +} + +static int isa1200_vibrator_play_effect(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct isa1200 *isa = input_get_drvdata(input); + int level; + + /* + * TODO: we currently only support rumble. + * The ISA1200 can control two motors and some devices + * also have two motors mounted. + */ + level = effect->u.rumble.strong_magnitude; + if (!level) + level = effect->u.rumble.weak_magnitude; + + dev_dbg(&input->dev, "FF effect type %d level %d\n", + effect->type, level); + + if (isa->level != level) { + isa->level = level; + schedule_work(&isa->play_work); + } + + return 0; +} + +static void isa1200_vibrator_close(struct input_dev *input) +{ + struct isa1200 *isa = input_get_drvdata(input); + + cancel_work_sync(&isa->play_work); + if (isa->level) + isa1200_stop(isa); + isa->level = 0; +} + +static int isa1200_probe(struct i2c_client *client) +{ + struct isa1200 *isa; + struct device *dev = &client->dev; + u32 val; + int ret; + + isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL); + if (!isa) + return -ENOMEM; + + isa->input = devm_input_allocate_device(dev); + if (!isa->input) + return -ENOMEM; + + i2c_set_clientdata(client, isa); + isa->dev = dev; + isa->conf = device_get_match_data(dev); + + /* + * TODO: we currently only support using a clock, but the device + * and the device tree bindings support feeding the chip with a + * PWM instead. If you need this and can test it, implement it. + */ + isa->clk = devm_clk_get(dev, NULL); + if (IS_ERR(isa->clk)) { + ret = PTR_ERR(isa->clk); + return dev_err_probe(dev, ret, "failed to get clock\n"); + } + + isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config); + if (IS_ERR(isa->map)) { + ret = PTR_ERR(isa->map); + return dev_err_probe(dev, ret, "failed to initialize register map\n"); + } + + /* Read a register so we know that regmap and I2C transport works */ + ret = regmap_read(isa->map, ISA1200_SCTRL, &val); + if (ret) { + dev_info(dev, "failed to read SCTRL: %d\n", ret); + return ret; + } + + isa->hen = devm_gpiod_get(dev, "hen", GPIOD_OUT_LOW); + if (IS_ERR(isa->hen)) { + ret = PTR_ERR(isa->map); + return dev_err_probe(dev, ret, "failed to get HEN GPIO\n"); + } + isa->len = devm_gpiod_get(dev, "len", GPIOD_OUT_LOW); + if (IS_ERR(isa->hen)) { + ret = PTR_ERR(isa->map); + return dev_err_probe(dev, ret, "failed to get LEN GPIO\n"); + } + + INIT_WORK(&isa->play_work, isa1200_play_work); + + isa->input->name = "isa1200-haptic"; + isa->input->id.bustype = BUS_HOST; + isa->input->dev.parent = dev; + isa->input->close = isa1200_vibrator_close; + + input_set_drvdata(isa->input, isa); + /* TODO: this hardware can likely support more than rumble */ + input_set_capability(isa->input, EV_FF, FF_RUMBLE); + + ret = input_ff_create_memless(isa->input, NULL, + isa1200_vibrator_play_effect); + if (ret) + return dev_err_probe(dev, ret, "couldn't create FF dev\n"); + + ret = input_register_device(isa->input); + if (ret) + return dev_err_probe(dev, ret, "couldn't register input dev\n"); + + return ret; +} + +static int __maybe_unused isa1200_suspend(struct device *dev) +{ + struct isa1200 *isa = dev_get_drvdata(dev); + + if (isa->level) + isa1200_stop(isa); + + return 0; +} + +static int __maybe_unused isa1200_resume(struct device *dev) +{ + struct isa1200 *isa = dev_get_drvdata(dev); + + if (isa->level) + isa1200_start(isa); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(isa1200_pm, isa1200_suspend, isa1200_resume); + +/* Configuration for Janice, Samsung Galaxy S Advance GT-I9070 */ +static const struct isa1200_config isa1200_janice = { + .ldo_voltage = ISA1200_LDO_VOLTAGE_30V, + .pwm_in = false, + .clkdiv = ISA1200_HCTRL0_DIV_256, + .plldiv = 2, + .freq = 0, + .duty = 0x3b, + .period = 0x77, +}; + +/* Configuration for Gavini, Samsung Galaxy Beam GT-I8350 */ +static const struct isa1200_config isa1200_gavini = { + .ldo_voltage = ISA1200_LDO_VOLTAGE_27V, + .pwm_in = false, + .clkdiv = ISA1200_HCTRL0_DIV_256, + .plldiv = 2, + .freq = 0, + .duty = 0x46, + .period = 0x8c, +}; + +static const struct of_device_id isa1200_of_match[] = { + { + .compatible = "immersion,isa1200-janice", + .data = &isa1200_janice, + }, + { + .compatible = "immersion,isa1200-gavini", + .data = &isa1200_gavini, + }, + { } +}; +MODULE_DEVICE_TABLE(of, isa1200_of_match); + +static struct i2c_driver isa1200_i2c_driver = { + .driver = { + .name = "isa1200", + .of_match_table = isa1200_of_match, + .pm = &isa1200_pm, + }, + .probe_new = isa1200_probe, +}; +module_i2c_driver(isa1200_i2c_driver); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_DESCRIPTION("Immersion ISA1200 haptic feedback unit"); +MODULE_LICENSE("GPL");