From patchwork Mon Nov 21 01:48:00 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kunihiko Hayashi X-Patchwork-Id: 627771 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 13341C4321E for ; Mon, 21 Nov 2022 01:48:26 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229617AbiKUBsY (ORCPT ); Sun, 20 Nov 2022 20:48:24 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60438 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229762AbiKUBsW (ORCPT ); Sun, 20 Nov 2022 20:48:22 -0500 Received: from mx.socionext.com (mx.socionext.com [202.248.49.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 78CAB17425; Sun, 20 Nov 2022 17:48:20 -0800 (PST) Received: from unknown (HELO kinkan2-ex.css.socionext.com) ([172.31.9.52]) by mx.socionext.com with ESMTP; 21 Nov 2022 10:48:19 +0900 Received: from mail.mfilter.local (m-filter-1 [10.213.24.61]) by kinkan2-ex.css.socionext.com (Postfix) with ESMTP id D34F92059054; Mon, 21 Nov 2022 10:48:19 +0900 (JST) Received: from 172.31.9.51 (172.31.9.51) by m-FILTER with ESMTP; Mon, 21 Nov 2022 10:48:19 +0900 Received: from plum.e01.socionext.com (unknown [10.212.243.119]) by kinkan2.css.socionext.com (Postfix) with ESMTP id 3F74EB62A4; Mon, 21 Nov 2022 10:48:19 +0900 (JST) From: Kunihiko Hayashi To: Mark Brown , Rob Herring , Krzysztof Kozlowski Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Kunihiko Hayashi Subject: [PATCH v2 2/2] spi: Add Socionext F_OSPI SPI flash controller driver Date: Mon, 21 Nov 2022 10:48:00 +0900 Message-Id: <20221121014800.13989-3-hayashi.kunihiko@socionext.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221121014800.13989-1-hayashi.kunihiko@socionext.com> References: <20221121014800.13989-1-hayashi.kunihiko@socionext.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Introduce Socionext F_OSPI controller driver. This controller is used to communicate with slave devices such as SPI Flash memories. It supports 4 slave devices and up to 8-bit wide bus, but supports master mode only. This driver uses spi-mem framework for SPI flash memory access, and can only operate indirect access mode and single data rate mode. Signed-off-by: Kunihiko Hayashi --- drivers/spi/Kconfig | 9 + drivers/spi/Makefile | 1 + drivers/spi/spi-sn-f-ospi.c | 703 ++++++++++++++++++++++++++++++++++++ 3 files changed, 713 insertions(+) create mode 100644 drivers/spi/spi-sn-f-ospi.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index cb7e3a8ef3a5..c6fb8cd6d2ae 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -906,6 +906,15 @@ config SPI_SLAVE_MT27XX say Y or M here.If you are not sure, say N. SPI slave drivers for Mediatek MT27XX series ARM SoCs. +config SPI_SN_F_OSPI + tristate "Socionext F_OSPI SPI flash controller" + depends on OF && HAS_IOMEM + depends on SPI_MEM + help + This enables support for the Socionext F_OSPI controller + for connecting an SPI Flash memory over up to 8-bit wide bus. + It supports indirect access mode only. + config SPI_SPRD tristate "Spreadtrum SPI controller" depends on ARCH_SPRD || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 60d0b2f611f1..971bd62e4481 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -121,6 +121,7 @@ obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o +obj-$(CONFIG_SPI_SN_F_OSPI) += spi-sn-f-ospi.o obj-$(CONFIG_SPI_SPRD) += spi-sprd.o obj-$(CONFIG_SPI_SPRD_ADI) += spi-sprd-adi.o obj-$(CONFIG_SPI_STM32) += spi-stm32.o diff --git a/drivers/spi/spi-sn-f-ospi.c b/drivers/spi/spi-sn-f-ospi.c new file mode 100644 index 000000000000..348c6e1edd38 --- /dev/null +++ b/drivers/spi/spi-sn-f-ospi.c @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Socionext SPI flash controller F_OSPI driver + * Copyright (C) 2021 Socionext Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Registers */ +#define OSPI_PROT_CTL_INDIR 0x00 +#define OSPI_PROT_MODE_DATA_MASK GENMASK(31, 30) +#define OSPI_PROT_MODE_ALT_MASK GENMASK(29, 28) +#define OSPI_PROT_MODE_ADDR_MASK GENMASK(27, 26) +#define OSPI_PROT_MODE_CODE_MASK GENMASK(25, 24) +#define OSPI_PROT_MODE_SINGLE 0 +#define OSPI_PROT_MODE_DUAL 1 +#define OSPI_PROT_MODE_QUAD 2 +#define OSPI_PROT_MODE_OCTAL 3 +#define OSPI_PROT_DATA_RATE_DATA BIT(23) +#define OSPI_PROT_DATA_RATE_ALT BIT(22) +#define OSPI_PROT_DATA_RATE_ADDR BIT(21) +#define OSPI_PROT_DATA_RATE_CODE BIT(20) +#define OSPI_PROT_SDR 0 +#define OSPI_PROT_DDR 1 +#define OSPI_PROT_BIT_POS_DATA BIT(19) +#define OSPI_PROT_BIT_POS_ALT BIT(18) +#define OSPI_PROT_BIT_POS_ADDR BIT(17) +#define OSPI_PROT_BIT_POS_CODE BIT(16) +#define OSPI_PROT_SAMP_EDGE BIT(12) +#define OSPI_PROT_DATA_UNIT_MASK GENMASK(11, 10) +#define OSPI_PROT_DATA_UNIT_1B 0 +#define OSPI_PROT_DATA_UNIT_2B 1 +#define OSPI_PROT_DATA_UNIT_4B 3 +#define OSPI_PROT_TRANS_DIR_WRITE BIT(9) +#define OSPI_PROT_DATA_EN BIT(8) +#define OSPI_PROT_ALT_SIZE_MASK GENMASK(7, 5) +#define OSPI_PROT_ADDR_SIZE_MASK GENMASK(4, 2) +#define OSPI_PROT_CODE_SIZE_MASK GENMASK(1, 0) + +#define OSPI_CLK_CTL 0x10 +#define OSPI_CLK_CTL_BOOT_INT_CLK_EN BIT(16) +#define OSPI_CLK_CTL_PHA BIT(12) +#define OSPI_CLK_CTL_PHA_180 0 +#define OSPI_CLK_CTL_PHA_90 1 +#define OSPI_CLK_CTL_DIV GENMASK(9, 8) +#define OSPI_CLK_CTL_DIV_1 0 +#define OSPI_CLK_CTL_DIV_2 1 +#define OSPI_CLK_CTL_DIV_4 2 +#define OSPI_CLK_CTL_DIV_8 3 +#define OSPI_CLK_CTL_INT_CLK_EN BIT(0) + +#define OSPI_CS_CTL1 0x14 +#define OSPI_CS_CTL2 0x18 +#define OSPI_SSEL 0x20 +#define OSPI_CMD_IDX_INDIR 0x40 +#define OSPI_ADDR 0x50 +#define OSPI_ALT_INDIR 0x60 +#define OSPI_DMY_INDIR 0x70 +#define OSPI_DAT 0x80 +#define OSPI_DAT_SWP_INDIR 0x90 + +#define OSPI_DAT_SIZE_INDIR 0xA0 +#define OSPI_DAT_SIZE_EN BIT(15) +#define OSPI_DAT_SIZE_MASK GENMASK(10, 0) +#define OSPI_DAT_SIZE_MAX (OSPI_DAT_SIZE_MASK + 1) + +#define OSPI_TRANS_CTL 0xC0 +#define OSPI_TRANS_CTL_STOP_REQ BIT(1) /* RW1AC */ +#define OSPI_TRANS_CTL_START_REQ BIT(0) /* RW1AC */ + +#define OSPI_ACC_MODE 0xC4 +#define OSPI_ACC_MODE_BOOT_DISABLE BIT(0) + +#define OSPI_SWRST 0xD0 +#define OSPI_SWRST_INDIR_WRITE_FIFO BIT(9) /* RW1AC */ +#define OSPI_SWRST_INDIR_READ_FIFO BIT(8) /* RW1AC */ + +#define OSPI_STAT 0xE0 +#define OSPI_STAT_IS_AXI_WRITING BIT(10) +#define OSPI_STAT_IS_AXI_READING BIT(9) +#define OSPI_STAT_IS_SPI_INT_CLK_STOP BIT(4) +#define OSPI_STAT_IS_SPI_IDLE BIT(3) + +#define OSPI_IRQ 0xF0 +#define OSPI_IRQ_CS_DEASSERT BIT(8) +#define OSPI_IRQ_WRITE_BUF_READY BIT(2) +#define OSPI_IRQ_READ_BUF_READY BIT(1) +#define OSPI_IRQ_CS_TRANS_COMP BIT(0) +#define OSPI_IRQ_ALL \ + (OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_WRITE_BUF_READY \ + | OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP) + +#define OSPI_IRQ_STAT_EN 0xF4 +#define OSPI_IRQ_SIG_EN 0xF8 + +/* Parameters */ +#define OSPI_NUM_CS 4 +#define OSPI_DUMMY_CYCLE_MAX 255 +#define OSPI_WAIT_MAX_MSEC 100 + +struct f_ospi { + void __iomem *base; + struct device *dev; + struct clk *clk; + struct mutex mlock; +}; + +static u32 f_ospi_get_dummy_cycle(const struct spi_mem_op *op) +{ + return (op->dummy.nbytes * 8) / op->dummy.buswidth; +} + +static void f_ospi_clear_irq(struct f_ospi *ospi) +{ + writel(OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_CS_TRANS_COMP, + ospi->base + OSPI_IRQ); +} + +static void f_ospi_enable_irq_status(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_STAT_EN); + val |= irq_bits; + writel(val, ospi->base + OSPI_IRQ_STAT_EN); +} + +static void f_ospi_disable_irq_status(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_STAT_EN); + val &= ~irq_bits; + writel(val, ospi->base + OSPI_IRQ_STAT_EN); +} + +static void f_ospi_disable_irq_output(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_SIG_EN); + val &= ~irq_bits; + writel(val, ospi->base + OSPI_IRQ_SIG_EN); +} + +static int f_ospi_prepare_config(struct f_ospi *ospi) +{ + u32 val, stat0, stat1; + + /* G4: Disable internal clock */ + val = readl(ospi->base + OSPI_CLK_CTL); + val &= ~(OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN); + writel(val, ospi->base + OSPI_CLK_CTL); + + /* G5: Wait for stop */ + stat0 = OSPI_STAT_IS_AXI_WRITING | OSPI_STAT_IS_AXI_READING; + stat1 = OSPI_STAT_IS_SPI_IDLE | OSPI_STAT_IS_SPI_INT_CLK_STOP; + + return readl_poll_timeout(ospi->base + OSPI_STAT, + val, (val & (stat0 | stat1)) == stat1, + 0, OSPI_WAIT_MAX_MSEC); +} + +static int f_ospi_unprepare_config(struct f_ospi *ospi) +{ + u32 val; + + /* G11: Enable internal clock */ + val = readl(ospi->base + OSPI_CLK_CTL); + val |= OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN; + writel(val, ospi->base + OSPI_CLK_CTL); + + /* G12: Wait for clock to start */ + return readl_poll_timeout(ospi->base + OSPI_STAT, + val, !(val & OSPI_STAT_IS_SPI_INT_CLK_STOP), + 0, OSPI_WAIT_MAX_MSEC); +} + +static void f_ospi_config_clk(struct f_ospi *ospi, u32 device_hz) +{ + long rate_hz = clk_get_rate(ospi->clk); + u32 div = DIV_ROUND_UP(rate_hz, device_hz); + u32 div_reg; + u32 val; + + if (rate_hz < device_hz) { + dev_warn(ospi->dev, "Device frequency too large: %d\n", + device_hz); + div_reg = OSPI_CLK_CTL_DIV_1; + } else { + if (div == 1) { + div_reg = OSPI_CLK_CTL_DIV_1; + } else if (div == 2) { + div_reg = OSPI_CLK_CTL_DIV_2; + } else if (div <= 4) { + div_reg = OSPI_CLK_CTL_DIV_4; + } else if (div <= 8) { + div_reg = OSPI_CLK_CTL_DIV_8; + } else { + dev_warn(ospi->dev, "Device frequency too small: %d\n", + device_hz); + div_reg = OSPI_CLK_CTL_DIV_8; + } + } + + /* + * G7: Set clock mode + * clock phase is fixed at 180 degrees and configure edge direction + * instead. + */ + val = readl(ospi->base + OSPI_CLK_CTL); + + val &= ~(OSPI_CLK_CTL_PHA | OSPI_CLK_CTL_DIV); + val |= FIELD_PREP(OSPI_CLK_CTL_PHA, OSPI_CLK_CTL_PHA_180) + | FIELD_PREP(OSPI_CLK_CTL_DIV, div_reg); + + writel(val, ospi->base + OSPI_CLK_CTL); +} + +static void f_ospi_config_dll(struct f_ospi *ospi) +{ + /* G8: Configure DLL, nothing */ +} + +static u8 f_ospi_get_mode(struct f_ospi *ospi, int width, int data_size) +{ + u8 mode = OSPI_PROT_MODE_SINGLE; + + switch (width) { + case 1: + mode = OSPI_PROT_MODE_SINGLE; + break; + case 2: + mode = OSPI_PROT_MODE_DUAL; + break; + case 4: + mode = OSPI_PROT_MODE_QUAD; + break; + case 8: + mode = OSPI_PROT_MODE_OCTAL; + break; + default: + if (data_size) + dev_err(ospi->dev, "Invalid buswidth: %d\n", width); + break; + } + + return mode; +} + +static void f_ospi_config_indir_protocol(struct f_ospi *ospi, + struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct spi_device *spi = mem->spi; + u8 mode; + u32 prot = 0, val; + int unit; + + /* Set one chip select */ + writel(BIT(spi->chip_select), ospi->base + OSPI_SSEL); + + mode = f_ospi_get_mode(ospi, op->cmd.buswidth, 1); + prot |= FIELD_PREP(OSPI_PROT_MODE_CODE_MASK, mode); + + mode = f_ospi_get_mode(ospi, op->addr.buswidth, op->addr.nbytes); + prot |= FIELD_PREP(OSPI_PROT_MODE_ADDR_MASK, mode); + + mode = f_ospi_get_mode(ospi, op->data.buswidth, op->data.nbytes); + prot |= FIELD_PREP(OSPI_PROT_MODE_DATA_MASK, mode); + + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_DATA, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ALT, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ADDR, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_CODE, OSPI_PROT_SDR); + + if (spi->mode & SPI_LSB_FIRST) + prot |= OSPI_PROT_BIT_POS_DATA | OSPI_PROT_BIT_POS_ALT + | OSPI_PROT_BIT_POS_ADDR | OSPI_PROT_BIT_POS_CODE; + + if (spi->mode & SPI_CPHA) + prot |= OSPI_PROT_SAMP_EDGE; + + /* Examine nbytes % 4 */ + switch (op->data.nbytes & 0x3) { + case 0: + unit = OSPI_PROT_DATA_UNIT_4B; + val = 0; + break; + case 2: + unit = OSPI_PROT_DATA_UNIT_2B; + val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1); + break; + default: + unit = OSPI_PROT_DATA_UNIT_1B; + val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1); + break; + } + prot |= FIELD_PREP(OSPI_PROT_DATA_UNIT_MASK, unit); + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + prot |= OSPI_PROT_DATA_EN; + break; + + case SPI_MEM_DATA_OUT: + prot |= OSPI_PROT_TRANS_DIR_WRITE | OSPI_PROT_DATA_EN; + break; + + case SPI_MEM_NO_DATA: + prot |= OSPI_PROT_TRANS_DIR_WRITE; + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + break; + } + + prot |= FIELD_PREP(OSPI_PROT_ADDR_SIZE_MASK, op->addr.nbytes); + prot |= FIELD_PREP(OSPI_PROT_CODE_SIZE_MASK, 1); /* 1byte */ + + writel(prot, ospi->base + OSPI_PROT_CTL_INDIR); + writel(val, ospi->base + OSPI_DAT_SIZE_INDIR); +} + +static int f_ospi_indir_prepare_op(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct spi_device *spi = mem->spi; + u32 irq_stat_en; + int ret; + + ret = f_ospi_prepare_config(ospi); + if (ret) + return ret; + + f_ospi_config_clk(ospi, spi->max_speed_hz); + + f_ospi_config_indir_protocol(ospi, mem, op); + + writel(f_ospi_get_dummy_cycle(op), ospi->base + OSPI_DMY_INDIR); + writel(op->addr.val, ospi->base + OSPI_ADDR); + writel(op->cmd.opcode, ospi->base + OSPI_CMD_IDX_INDIR); + + f_ospi_clear_irq(ospi); + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + irq_stat_en = OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP; + break; + + case SPI_MEM_DATA_OUT: + irq_stat_en = OSPI_IRQ_WRITE_BUF_READY | OSPI_IRQ_CS_TRANS_COMP; + break; + + case SPI_MEM_NO_DATA: + irq_stat_en = OSPI_IRQ_CS_TRANS_COMP; + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + irq_stat_en = 0; + } + + f_ospi_disable_irq_status(ospi, ~irq_stat_en); + f_ospi_enable_irq_status(ospi, irq_stat_en); + + return f_ospi_unprepare_config(ospi); +} + +static void f_ospi_indir_start_xfer(struct f_ospi *ospi) +{ + /* Write only 1, auto cleared */ + writel(OSPI_TRANS_CTL_START_REQ, ospi->base + OSPI_TRANS_CTL); +} + +static void f_ospi_indir_stop_xfer(struct f_ospi *ospi) +{ + /* Write only 1, auto cleared */ + writel(OSPI_TRANS_CTL_STOP_REQ, ospi->base + OSPI_TRANS_CTL); +} + +static int f_ospi_indir_wait_xfer_complete(struct f_ospi *ospi) +{ + u32 val; + + return readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_CS_TRANS_COMP, + 0, OSPI_WAIT_MAX_MSEC); +} + +static int f_ospi_indir_read(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 *buf = op->data.buf.in; + u32 val; + int i, ret; + + mutex_lock(&ospi->mlock); + + /* E1-2: Prepare transfer operation */ + ret = f_ospi_indir_prepare_op(ospi, mem, op); + if (ret) + goto out; + + f_ospi_indir_start_xfer(ospi); + + /* E3-4: Wait for ready and read data */ + for (i = 0; i < op->data.nbytes; i++) { + ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_READ_BUF_READY, + 0, OSPI_WAIT_MAX_MSEC); + if (ret) + goto out; + + buf[i] = readl(ospi->base + OSPI_DAT) & 0xFF; + } + + /* E5-6: Stop transfer if data size is nothing */ + if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN)) + f_ospi_indir_stop_xfer(ospi); + + /* E7-8: Wait for completion and clear */ + ret = f_ospi_indir_wait_xfer_complete(ospi); + if (ret) + goto out; + + writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ); + + /* E9: Do nothing if data size is valid */ + if (readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN) + goto out; + + /* E10-11: Reset and check read fifo */ + writel(OSPI_SWRST_INDIR_READ_FIFO, ospi->base + OSPI_SWRST); + + ret = readl_poll_timeout(ospi->base + OSPI_SWRST, val, + !(val & OSPI_SWRST_INDIR_READ_FIFO), + 0, OSPI_WAIT_MAX_MSEC); +out: + mutex_unlock(&ospi->mlock); + + return ret; +} + +static int f_ospi_indir_write(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 *buf = (u8 *)op->data.buf.out; + u32 val; + int i, ret; + + mutex_lock(&ospi->mlock); + + /* F1-3: Prepare transfer operation */ + ret = f_ospi_indir_prepare_op(ospi, mem, op); + if (ret) + goto out; + + f_ospi_indir_start_xfer(ospi); + + if (!(readl(ospi->base + OSPI_PROT_CTL_INDIR) & OSPI_PROT_DATA_EN)) + goto nodata; + + /* F4-5: Wait for buffer ready and write data */ + for (i = 0; i < op->data.nbytes; i++) { + ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_WRITE_BUF_READY, + 0, OSPI_WAIT_MAX_MSEC); + if (ret) + goto out; + + writel(buf[i], ospi->base + OSPI_DAT); + } + + /* F6-7: Stop transfer if data size is nothing */ + if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN)) + f_ospi_indir_stop_xfer(ospi); + +nodata: + /* F8-9: Wait for completion and clear */ + ret = f_ospi_indir_wait_xfer_complete(ospi); + if (ret) + goto out; + + writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ); +out: + mutex_unlock(&ospi->mlock); + + return ret; +} + +static int f_ospi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct f_ospi *ospi = spi_controller_get_devdata(mem->spi->master); + int err = 0; + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + err = f_ospi_indir_read(ospi, mem, op); + break; + + case SPI_MEM_DATA_OUT: + fallthrough; + case SPI_MEM_NO_DATA: + err = f_ospi_indir_write(ospi, mem, op); + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + err = -EOPNOTSUPP; + } + + return err; +} + +static bool f_ospi_supports_op_width(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 width_available[] = { 0, 1, 2, 4, 8 }; + u8 width_op[] = { op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth }; + bool is_match_found; + int i, j; + + for (i = 0; i < ARRAY_SIZE(width_op); i++) { + is_match_found = false; + + for (j = 0; j < ARRAY_SIZE(width_available); j++) { + if (width_op[i] == width_available[j]) { + is_match_found = true; + break; + } + } + + if (!is_match_found) + return false; + } + + return true; +} + +static bool f_ospi_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (f_ospi_get_dummy_cycle(op) > OSPI_DUMMY_CYCLE_MAX) + return false; + + if (op->addr.nbytes > 4) + return false; + + if (!f_ospi_supports_op_width(mem, op)) + return false; + + return true; +} + +static int f_ospi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + op->data.nbytes = min((int)op->data.nbytes, (int)(OSPI_DAT_SIZE_MAX)); + + return 0; +} + +static const struct spi_controller_mem_ops f_ospi_mem_ops = { + .adjust_op_size = f_ospi_adjust_op_size, + .supports_op = f_ospi_supports_op, + .exec_op = f_ospi_exec_op, +}; + +static int f_ospi_init(struct f_ospi *ospi) +{ + int ret; + + ret = f_ospi_prepare_config(ospi); + if (ret) + return ret; + + /* Disable boot signal */ + writel(OSPI_ACC_MODE_BOOT_DISABLE, ospi->base + OSPI_ACC_MODE); + + f_ospi_config_dll(ospi); + + /* Disable IRQ */ + f_ospi_clear_irq(ospi); + f_ospi_disable_irq_status(ospi, OSPI_IRQ_ALL); + f_ospi_disable_irq_output(ospi, OSPI_IRQ_ALL); + + return f_ospi_unprepare_config(ospi); +} + +static int f_ospi_probe(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct device *dev = &pdev->dev; + struct f_ospi *ospi; + u32 num_cs = OSPI_NUM_CS; + int ret; + + ctlr = spi_alloc_master(dev, sizeof(*ospi)); + if (!ctlr) + return -ENOMEM; + + ctlr->mode_bits = SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL + | SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_OCTAL + | SPI_MODE_0 | SPI_MODE_1 | SPI_LSB_FIRST; + ctlr->mem_ops = &f_ospi_mem_ops; + ctlr->bus_num = -1; + of_property_read_u32(dev->of_node, "num-cs", &num_cs); + if (num_cs > OSPI_NUM_CS) { + dev_err(dev, "num-cs too large: %d\n", num_cs); + return -ENOMEM; + } + ctlr->num_chipselect = num_cs; + ctlr->dev.of_node = dev->of_node; + + ospi = spi_controller_get_devdata(ctlr); + ospi->dev = dev; + + platform_set_drvdata(pdev, ospi); + + ospi->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ospi->base)) { + ret = PTR_ERR(ospi->base); + goto err_put_ctlr; + } + + ospi->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ospi->clk)) { + ret = PTR_ERR(ospi->clk); + goto err_put_ctlr; + } + + ret = clk_prepare_enable(ospi->clk); + if (ret) { + dev_err(dev, "Failed to enable the clock\n"); + goto err_disable_clk; + } + + mutex_init(&ospi->mlock); + + ret = f_ospi_init(ospi); + if (ret) + goto err_destroy_mutex; + + ret = devm_spi_register_controller(dev, ctlr); + if (ret) + goto err_destroy_mutex; + + return 0; + +err_destroy_mutex: + mutex_destroy(&ospi->mlock); + +err_disable_clk: + clk_disable_unprepare(ospi->clk); + +err_put_ctlr: + spi_controller_put(ctlr); + + return ret; +} + +static int f_ospi_remove(struct platform_device *pdev) +{ + struct f_ospi *ospi = platform_get_drvdata(pdev); + + clk_disable_unprepare(ospi->clk); + + mutex_destroy(&ospi->mlock); + + return 0; +} + +static const struct of_device_id f_ospi_dt_ids[] = { + { .compatible = "socionext,f-ospi" }, + {} +}; +MODULE_DEVICE_TABLE(of, f_ospi_dt_ids); + +static struct platform_driver f_ospi_driver = { + .driver = { + .name = "socionext,f-ospi", + .of_match_table = f_ospi_dt_ids, + }, + .probe = f_ospi_probe, + .remove = f_ospi_remove, +}; +module_platform_driver(f_ospi_driver); + +MODULE_DESCRIPTION("Socionext F_OSPI controller driver"); +MODULE_AUTHOR("Socionext Inc."); +MODULE_AUTHOR("Kunihiko Hayashi "); +MODULE_LICENSE("GPL");