From patchwork Mon Jul 22 06:51:46 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 169340 Delivered-To: patch@linaro.org Received: by 2002:a92:4782:0:0:0:0:0 with SMTP id e2csp7138349ilk; Sun, 21 Jul 2019 23:53:53 -0700 (PDT) X-Google-Smtp-Source: APXvYqwZuYm3Nfo7ztfnkRtEw9x+NBi2aCHVapumbTmcneXlTwiCYcJZCwBUhr6Nbm57goTX54FE X-Received: by 2002:a17:90a:2ec1:: with SMTP id h1mr75990541pjs.119.1563778433426; Sun, 21 Jul 2019 23:53:53 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1563778433; cv=none; d=google.com; s=arc-20160816; b=J89mZ4zirj8mGm6CXTNKbyrJ6wN9L4WMwGvTtjeFKGKUYYYDuFa/y21fIusXpQREng kUS3dXU2YQ/BCJB1iCzpQ8edq0ZYX3K9OQ/HvrOzCLO3aoSi+IR+kuxTeHQtYIYPTRjj +1qVjr4SD0xgalE8fP776pKSsxxo58vwwGD/Cw3YhajQzAQUi0pk38TMF4r15Fveu8TQ 7YWhL+hqwiP+k/JwUQSywwrBCdr1bC3iIPV2rGCOEykdZAeVU0uYBCmfvEkTieG6bnrD Y4ZMUdxhOG5WChxd/LdwVI+ePj6tazxVnoG92iObeNjkxcGCwHzI+H5wbHkuCbR3sq70 tYbg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :message-id:date:subject:cc:to:from:dkim-signature; bh=LwLF82In7bsHKqLg2IPqa3lCzGDshcxlFU0D0U8su3I=; b=Y9YbCe2XXdOxQo+Np2H4u+lb77SQZbRcK90yMVFl36dE5aJSd16to4FnHigkyIGtmR 7SwxBPXmHj3HkqW1Q1Ou1aC4WZRaxmzEMoB/ZmgU7w0HqRvh867QeB5mHZ0NQ5WfccZ3 c6VhpYKmodI/k6jgYzHJ1+1WL4OlmGx3IJdEwwiFdRGqQYsMb4/RdsXm/FwIvYjIRiJU 6THPrAcRBnqxG1S7fIGux2wj2bscvpchjj1fL1ndHmoN6jF0G0u8Ne50jdcrwo1vBSCt PFgfSKKLxeE29o+CbJZgru+ZsVsTfUl9ZhXaZ0hAG9aG6R0uzunwj9FKj2MvRDEVD8Xp wxyQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=hJDEXFnz; spf=pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-serial-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id n6si11262086pgl.419.2019.07.21.23.53.53; Sun, 21 Jul 2019 23:53:53 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=hJDEXFnz; spf=pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-serial-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726440AbfGVGxw (ORCPT + 1 other); Mon, 22 Jul 2019 02:53:52 -0400 Received: from mail-lj1-f194.google.com ([209.85.208.194]:39753 "EHLO mail-lj1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725920AbfGVGxw (ORCPT ); Mon, 22 Jul 2019 02:53:52 -0400 Received: by mail-lj1-f194.google.com with SMTP id v18so36408279ljh.6 for ; Sun, 21 Jul 2019 23:53:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=LwLF82In7bsHKqLg2IPqa3lCzGDshcxlFU0D0U8su3I=; b=hJDEXFnzArXhqJqxtaKByLuQMzeYkBdfUW11JqdKroRNc/rObLk4jE0+URH/zIvbxK VxuC2ItHUt6SbfF6t53dg3Lup+b0uOq/rQLgySI2TS/SHPzi3iph6sYQ6s46leTTSPxF ZsLTBxi53qPQsFZooWQdSMnNY0HcvAEwI+6OVuh4lWSWkALmC8FsRQjS5l2uNyUQTF75 ike/mMGfAWlH2Vy++vtvsoaiVt3p4mXN64fOETKlyhTSqXIApD+VSD42NdsHzz2egQaG T91VMPn/nKilTU5w7SQww66IJljRxGnUVK0CFftPKcL6ueXNX6twNV/1DO2xF4PzZcPB zSEA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=LwLF82In7bsHKqLg2IPqa3lCzGDshcxlFU0D0U8su3I=; b=TYo2wCbLpWhNHfsQ2c1LzM0MK+pxfhNlblu4Xo79R4id2nLGXTcpC9hT0gyVlDcBHf hKuoua1X5Y+WGcGgsoDyl1qXsKHZwoMlWgGfRTCi1tIrOFtZJGl2Tr73pt7NBz4eRFgz r9t2lNhXkE2zKnPHdi024Ujy4sACM3xno7+AVOxmYvIUt/1ae4nmv0ck6bfOS6oiMfsp OSN+NgrpDXEL+lwjrZfn3d6j6AK0Dkdi6WzgYF42Hir+CV1caNjiBZa3qweovWMvmjwc XEX2VbXr0mAHtS52hxNHlYZqU8zgIPhBEhCPigmf5xyM8C9OSWiuU1ojKH5c0D0EFqDf pXaw== X-Gm-Message-State: APjAAAVQb9pfBLjA1Jitxs87lCobwujGIUQ4c1s1yVufl2XPE+6HDgjJ dZ1382RKCDhgx34uiByGvepqf5BehSY= X-Received: by 2002:a2e:9bc6:: with SMTP id w6mr36366551ljj.156.1563778429294; Sun, 21 Jul 2019 23:53:49 -0700 (PDT) Received: from localhost.localdomain (c-22cd225c.014-348-6c756e10.bbcust.telenor.se. [92.34.205.34]) by smtp.gmail.com with ESMTPSA id v15sm5903028lfd.53.2019.07.21.23.53.47 (version=TLS1_3 cipher=AEAD-AES256-GCM-SHA384 bits=256/256); Sun, 21 Jul 2019 23:53:48 -0700 (PDT) From: Linus Walleij To: linux-serial@vger.kernel.org, Greg Kroah-Hartman Cc: Linus Walleij , Robert Schwebel , Sascha Hauer Subject: [PATCH v2] tty: serial: netx: Delete driver Date: Mon, 22 Jul 2019 08:51:46 +0200 Message-Id: <20190722065146.4844-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.21.0 MIME-Version: 1.0 Sender: linux-serial-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org The Netx ARM machine was deleted from the kernel. This driver had no users and has to go. Cc: Robert Schwebel Cc: Sascha Hauer Signed-off-by: Linus Walleij --- ChangeLog v1->v2: - Found a two-liner in the UAPI serial file that I forgot. --- drivers/tty/serial/Kconfig | 19 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/netx-serial.c | 733 ------------------------------- include/uapi/linux/serial_core.h | 3 - 4 files changed, 756 deletions(-) delete mode 100644 drivers/tty/serial/netx-serial.c -- 2.21.0 diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index fd385c8c53a5..3083dbae35f7 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1035,25 +1035,6 @@ config SERIAL_VT8500_CONSOLE depends on SERIAL_VT8500=y select SERIAL_CORE_CONSOLE -config SERIAL_NETX - tristate "NetX serial port support" - depends on ARCH_NETX - select SERIAL_CORE - help - If you have a machine based on a Hilscher NetX SoC you - can enable its onboard serial port by enabling this option. - - To compile this driver as a module, choose M here: the - module will be called netx-serial. - -config SERIAL_NETX_CONSOLE - bool "Console on NetX serial port" - depends on SERIAL_NETX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Hilscher NetX SoC - you can make it the console by answering Y to this option. - config SERIAL_OMAP tristate "OMAP serial port support" depends on ARCH_OMAP2PLUS diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 7cd7cabfa6c4..15a0fccadf7e 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -59,7 +59,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o -obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c deleted file mode 100644 index b3556863491f..000000000000 --- a/drivers/tty/serial/netx-serial.c +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2005 Sascha Hauer , Pengutronix - */ - -#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_NX_MAJOR 204 -#define MINOR_START 170 - -enum uart_regs { - UART_DR = 0x00, - UART_SR = 0x04, - UART_LINE_CR = 0x08, - UART_BAUDDIV_MSB = 0x0c, - UART_BAUDDIV_LSB = 0x10, - UART_CR = 0x14, - UART_FR = 0x18, - UART_IIR = 0x1c, - UART_ILPR = 0x20, - UART_RTS_CR = 0x24, - UART_RTS_LEAD = 0x28, - UART_RTS_TRAIL = 0x2c, - UART_DRV_ENABLE = 0x30, - UART_BRM_CR = 0x34, - UART_RXFIFO_IRQLEVEL = 0x38, - UART_TXFIFO_IRQLEVEL = 0x3c, -}; - -#define SR_FE (1<<0) -#define SR_PE (1<<1) -#define SR_BE (1<<2) -#define SR_OE (1<<3) - -#define LINE_CR_BRK (1<<0) -#define LINE_CR_PEN (1<<1) -#define LINE_CR_EPS (1<<2) -#define LINE_CR_STP2 (1<<3) -#define LINE_CR_FEN (1<<4) -#define LINE_CR_5BIT (0<<5) -#define LINE_CR_6BIT (1<<5) -#define LINE_CR_7BIT (2<<5) -#define LINE_CR_8BIT (3<<5) -#define LINE_CR_BITS_MASK (3<<5) - -#define CR_UART_EN (1<<0) -#define CR_SIREN (1<<1) -#define CR_SIRLP (1<<2) -#define CR_MSIE (1<<3) -#define CR_RIE (1<<4) -#define CR_TIE (1<<5) -#define CR_RTIE (1<<6) -#define CR_LBE (1<<7) - -#define FR_CTS (1<<0) -#define FR_DSR (1<<1) -#define FR_DCD (1<<2) -#define FR_BUSY (1<<3) -#define FR_RXFE (1<<4) -#define FR_TXFF (1<<5) -#define FR_RXFF (1<<6) -#define FR_TXFE (1<<7) - -#define IIR_MIS (1<<0) -#define IIR_RIS (1<<1) -#define IIR_TIS (1<<2) -#define IIR_RTIS (1<<3) -#define IIR_MASK 0xf - -#define RTS_CR_AUTO (1<<0) -#define RTS_CR_RTS (1<<1) -#define RTS_CR_COUNT (1<<2) -#define RTS_CR_MOD2 (1<<3) -#define RTS_CR_RTS_POL (1<<4) -#define RTS_CR_CTS_CTR (1<<5) -#define RTS_CR_CTS_POL (1<<6) -#define RTS_CR_STICK (1<<7) - -#define UART_PORT_SIZE 0x40 -#define DRIVER_NAME "netx-uart" - -struct netx_port { - struct uart_port port; -}; - -static void netx_stop_tx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_TIE, port->membase + UART_CR); -} - -static void netx_stop_rx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_RIE, port->membase + UART_CR); -} - -static void netx_enable_ms(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val | CR_MSIE, port->membase + UART_CR); -} - -static inline void netx_transmit_buffer(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - writel(port->x_char, port->membase + UART_DR); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - netx_stop_tx(port); - return; - } - - do { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], port->membase + UART_DR); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (!(readl(port->membase + UART_FR) & FR_TXFF)); - - if (uart_circ_empty(xmit)) - netx_stop_tx(port); -} - -static void netx_start_tx(struct uart_port *port) -{ - writel( - readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); - - if (!(readl(port->membase + UART_FR) & FR_TXFF)) - netx_transmit_buffer(port); -} - -static unsigned int netx_tx_empty(struct uart_port *port) -{ - return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; -} - -static void netx_txint(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - netx_stop_tx(port); - return; - } - - netx_transmit_buffer(port); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void netx_rxint(struct uart_port *port, unsigned long *flags) -{ - unsigned char rx, flg, status; - - while (!(readl(port->membase + UART_FR) & FR_RXFE)) { - rx = readl(port->membase + UART_DR); - flg = TTY_NORMAL; - port->icount.rx++; - status = readl(port->membase + UART_SR); - if (status & SR_BE) { - writel(0, port->membase + UART_SR); - if (uart_handle_break(port)) - continue; - } - - if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { - - if (status & SR_PE) - port->icount.parity++; - else if (status & SR_FE) - port->icount.frame++; - if (status & SR_OE) - port->icount.overrun++; - - status &= port->read_status_mask; - - if (status & SR_BE) - flg = TTY_BREAK; - else if (status & SR_PE) - flg = TTY_PARITY; - else if (status & SR_FE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, rx)) - continue; - - uart_insert_char(port, status, SR_OE, rx, flg); - } - - spin_unlock_irqrestore(&port->lock, *flags); - tty_flip_buffer_push(&port->state->port); - spin_lock_irqsave(&port->lock, *flags); -} - -static irqreturn_t netx_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long flags; - unsigned char status; - - spin_lock_irqsave(&port->lock,flags); - - status = readl(port->membase + UART_IIR) & IIR_MASK; - while (status) { - if (status & IIR_RIS) - netx_rxint(port, &flags); - if (status & IIR_TIS) - netx_txint(port); - if (status & IIR_MIS) { - if (readl(port->membase + UART_FR) & FR_CTS) - uart_handle_cts_change(port, 1); - else - uart_handle_cts_change(port, 0); - } - writel(0, port->membase + UART_IIR); - status = readl(port->membase + UART_IIR) & IIR_MASK; - } - - spin_unlock_irqrestore(&port->lock,flags); - return IRQ_HANDLED; -} - -static unsigned int netx_get_mctrl(struct uart_port *port) -{ - unsigned int ret = TIOCM_DSR | TIOCM_CAR; - - if (readl(port->membase + UART_FR) & FR_CTS) - ret |= TIOCM_CTS; - - return ret; -} - -static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - /* FIXME: Locking needed ? */ - if (mctrl & TIOCM_RTS) { - val = readl(port->membase + UART_RTS_CR); - writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); - } -} - -static void netx_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int line_cr; - spin_lock_irq(&port->lock); - - line_cr = readl(port->membase + UART_LINE_CR); - if (break_state != 0) - line_cr |= LINE_CR_BRK; - else - line_cr &= ~LINE_CR_BRK; - writel(line_cr, port->membase + UART_LINE_CR); - - spin_unlock_irq(&port->lock); -} - -static int netx_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, netx_int, 0, - DRIVER_NAME, port); - if (ret) { - dev_err(port->dev, "unable to grab irq%d\n",port->irq); - goto exit; - } - - writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, - port->membase + UART_LINE_CR); - - writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, - port->membase + UART_CR); - -exit: - return ret; -} - -static void netx_shutdown(struct uart_port *port) -{ - writel(0, port->membase + UART_CR) ; - - free_irq(port->irq, port); -} - -static void -netx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud, quot; - unsigned char old_cr; - unsigned char line_cr = LINE_CR_FEN; - unsigned char rts_cr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS5: - line_cr |= LINE_CR_5BIT; - break; - case CS6: - line_cr |= LINE_CR_6BIT; - break; - case CS7: - line_cr |= LINE_CR_7BIT; - break; - case CS8: - line_cr |= LINE_CR_8BIT; - break; - } - - if (termios->c_cflag & CSTOPB) - line_cr |= LINE_CR_STP2; - - if (termios->c_cflag & PARENB) { - line_cr |= LINE_CR_PEN; - if (!(termios->c_cflag & PARODD)) - line_cr |= LINE_CR_EPS; - } - - if (termios->c_cflag & CRTSCTS) - rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = baud * 4096; - quot /= 1000; - quot *= 256; - quot /= 100000; - - spin_lock_irq(&port->lock); - - uart_update_timeout(port, termios->c_cflag, baud); - - old_cr = readl(port->membase + UART_CR); - - /* disable interrupts */ - writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), - port->membase + UART_CR); - - /* drain transmitter */ - while (readl(port->membase + UART_FR) & FR_BUSY); - - /* disable UART */ - writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); - - /* modem status interrupts */ - old_cr &= ~CR_MSIE; - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= CR_MSIE; - - writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); - writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); - writel(line_cr, port->membase + UART_LINE_CR); - - writel(rts_cr, port->membase + UART_RTS_CR); - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= SR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - } - - port->read_status_mask = 0; - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= SR_BE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= SR_PE | SR_FE; - - writel(old_cr, port->membase + UART_CR); - - spin_unlock_irq(&port->lock); -} - -static const char *netx_type(struct uart_port *port) -{ - return port->type == PORT_NETX ? "NETX" : NULL; -} - -static void netx_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -static int netx_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - DRIVER_NAME) != NULL ? 0 : -EBUSY; -} - -static void netx_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) - port->type = PORT_NETX; -} - -static int -netx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) - ret = -EINVAL; - - return ret; -} - -static struct uart_ops netx_pops = { - .tx_empty = netx_tx_empty, - .set_mctrl = netx_set_mctrl, - .get_mctrl = netx_get_mctrl, - .stop_tx = netx_stop_tx, - .start_tx = netx_start_tx, - .stop_rx = netx_stop_rx, - .enable_ms = netx_enable_ms, - .break_ctl = netx_break_ctl, - .startup = netx_startup, - .shutdown = netx_shutdown, - .set_termios = netx_set_termios, - .type = netx_type, - .release_port = netx_release_port, - .request_port = netx_request_port, - .config_port = netx_config_port, - .verify_port = netx_verify_port, -}; - -static struct netx_port netx_ports[] = { - { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART0), - .mapbase = NETX_PA_UART0, - .irq = NETX_IRQ_UART0, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 0, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART1), - .mapbase = NETX_PA_UART1, - .irq = NETX_IRQ_UART1, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 1, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART2), - .mapbase = NETX_PA_UART2, - .irq = NETX_IRQ_UART2, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 2, - }, - } -}; - -#ifdef CONFIG_SERIAL_NETX_CONSOLE - -static void netx_console_putchar(struct uart_port *port, int ch) -{ - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(ch, port->membase + UART_DR); -} - -static void -netx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &netx_ports[co->index].port; - unsigned char cr_save; - - cr_save = readl(port->membase + UART_CR); - writel(cr_save | CR_UART_EN, port->membase + UART_CR); - - uart_console_write(port, s, count, netx_console_putchar); - - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(cr_save, port->membase + UART_CR); -} - -static void __init -netx_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits, int *flow) -{ - unsigned char line_cr; - - *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | - readl(port->membase + UART_BAUDDIV_LSB); - *baud *= 1000; - *baud /= 4096; - *baud *= 1000; - *baud /= 256; - *baud *= 100; - - line_cr = readl(port->membase + UART_LINE_CR); - *parity = 'n'; - if (line_cr & LINE_CR_PEN) { - if (line_cr & LINE_CR_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - switch (line_cr & LINE_CR_BITS_MASK) { - case LINE_CR_8BIT: - *bits = 8; - break; - case LINE_CR_7BIT: - *bits = 7; - break; - case LINE_CR_6BIT: - *bits = 6; - break; - case LINE_CR_5BIT: - *bits = 5; - break; - } - - if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) - *flow = 'r'; -} - -static int __init -netx_console_setup(struct console *co, char *options) -{ - struct netx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) - co->index = 0; - sport = &netx_ports[co->index]; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - /* if the UART is enabled, assume it has been correctly setup - * by the bootloader and get the options - */ - if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { - netx_console_get_options(&sport->port, &baud, - &parity, &bits, &flow); - } - - } - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver netx_reg; -static struct console netx_console = { - .name = "ttyNX", - .write = netx_console_write, - .device = uart_console_device, - .setup = netx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &netx_reg, -}; - -static int __init netx_console_init(void) -{ - register_console(&netx_console); - return 0; -} -console_initcall(netx_console_init); - -#define NETX_CONSOLE &netx_console -#else -#define NETX_CONSOLE NULL -#endif - -static struct uart_driver netx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = "ttyNX", - .major = SERIAL_NX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(netx_ports), - .cons = NETX_CONSOLE, -}; - -static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_suspend_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_resume(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_resume_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_probe(struct platform_device *pdev) -{ - struct uart_port *port = &netx_ports[pdev->id].port; - - dev_info(&pdev->dev, "initialising\n"); - - port->dev = &pdev->dev; - - writel(1, port->membase + UART_RXFIFO_IRQLEVEL); - uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); - platform_set_drvdata(pdev, &netx_ports[pdev->id]); - - return 0; -} - -static int serial_netx_remove(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_remove_one_port(&netx_reg, &sport->port); - - return 0; -} - -static struct platform_driver serial_netx_driver = { - .probe = serial_netx_probe, - .remove = serial_netx_remove, - - .suspend = serial_netx_suspend, - .resume = serial_netx_resume, - - .driver = { - .name = DRIVER_NAME, - }, -}; - -static int __init netx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: NetX driver\n"); - - ret = uart_register_driver(&netx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_netx_driver); - if (ret != 0) - uart_unregister_driver(&netx_reg); - - return 0; -} - -static void __exit netx_serial_exit(void) -{ - platform_driver_unregister(&serial_netx_driver); - uart_unregister_driver(&netx_reg); -} - -module_init(netx_serial_init); -module_exit(netx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("NetX serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 5642c05e0da0..3cc3af1c2ee1 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -150,9 +150,6 @@ #define PORT_PNX8XXX 70 -/* Hilscher netx */ -#define PORT_NETX 71 - /* SUN4V Hypervisor Console */ #define PORT_SUNHV 72