From patchwork Thu Nov 23 08:36:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 746608 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="mlN8icQW" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 578A2D41; Thu, 23 Nov 2023 00:36:45 -0800 (PST) Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN5VaqD014987; Thu, 23 Nov 2023 08:36:32 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=mP3Zh3ghe1QobYCFwkdhcpkOdhL0iT2Q9aPGVoVes/U=; b=mlN8icQW1SBwkV11Nv/PpT3023DZumixwDZwnctBAtcEZXKbIesFQ3efR1eTS7T5OzcW F5UxLwPli9dET/LIdJWk7FIrELPgE3/r9VuGc39RwRGpVq6XVssXgWu4mTFJa80rjS/f Jw2xS1w1mIg6GEUwTJzcsTYNwW7cfyNk3VBwIs5SxNa3lUsSrpS7H3tg8dk4Cojn2kX2 ZYbptRRxFw/VICAPhJnplpgt8uhatl4oIGxv5sUk65/kNLTIdMVcSMu0ULBTgaAseobw zC8iHGaDpK3zhI/GAXcNpUsQa/2+St4bcQ9na1bDRm+IA4EmhgAPRp2y0tKghP4NFMjI Bw== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhkfnt4ha-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:36:32 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8L3v5005972; Thu, 23 Nov 2023 08:36:31 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3uj1yvrv66-1; Thu, 23 Nov 2023 08:36:31 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8Z82A024683; Thu, 23 Nov 2023 08:36:31 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3AN8aUoV025933; Thu, 23 Nov 2023 08:36:30 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id B9F1220A68; Thu, 23 Nov 2023 00:36:30 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-arm-msm@vger.kernel.org (open list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param() Date: Thu, 23 Nov 2023 00:36:08 -0800 Message-Id: <1700728577-14729-3-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> References: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: zMRIhwht2_57gNLlgbHZ9SVAuWn2ukGa X-Proofpoint-ORIG-GUID: zMRIhwht2_57gNLlgbHZ9SVAuWn2ukGa X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 impostorscore=0 mlxscore=0 clxscore=1015 spamscore=0 lowpriorityscore=0 adultscore=0 bulkscore=0 suspectscore=0 malwarescore=0 mlxlogscore=999 priorityscore=1501 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230060 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only used here. Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 1 - drivers/ufs/host/ufs-qcom.h | 2 -- 2 files changed, 3 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index aee66a3..cc30ad9 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -909,7 +909,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: ufshcd_init_host_param(&host_params); - host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 9950a00..82cd143 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -27,8 +27,6 @@ #define SLOW 1 #define FAST 2 -#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B - /* QCOM UFS host controller vendor specific registers */ enum { REG_UFS_SYS1CLK_1US = 0xC0, From patchwork Thu Nov 23 08:36:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 746605 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Upufy/fB" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E33D8BC; Thu, 23 Nov 2023 00:40:27 -0800 (PST) Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN8QkJq001065; Thu, 23 Nov 2023 08:36:35 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=ZhwV3737hVFopoyIktTqMRJOFfXUF17oXq/72ZAucXQ=; b=Upufy/fBEtFgRuCqG+0SwyuXicJIxFaWWHvfHrBWPy1d20LIVdnGV0ZcsfPNeiwNoQ9e X1VZY6cC8cyhP3AReyxwgtp3AIwtOnjRsIPbotLMiHgc4eVGqvjX4V4iSAqpUdxnEquo ZXK7L7PgBCg8d0zpJy+df+IQ6YdkT4ZVcSnoJgWKw+S4sLNOJwUCQ3RrumhrZbFES1H4 rI9TyKTQ/9XUJRa0YFLJQPE4ogFf1WJ32usFHtcB8I4vrFV3EQjuMBc1y+IslMrWXc8N hzV3hmDe3rDcQLZ8z681Hm8owi/nKXnGHkdqI0vEDC9Dv9IklVWqKTYwN85A69t0uGJR vw== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhwme8uhj-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:36:34 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8LL2g019770; Thu, 23 Nov 2023 08:36:34 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3uhcusvqnf-1; Thu, 23 Nov 2023 08:36:34 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8aX8d008214; Thu, 23 Nov 2023 08:36:33 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3AN8aX1Z008212; Thu, 23 Nov 2023 08:36:33 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 87B8E20A68; Thu, 23 Nov 2023 00:36:33 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-arm-msm@vger.kernel.org (open list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 05/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear Date: Thu, 23 Nov 2023 00:36:11 -0800 Message-Id: <1700728577-14729-6-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> References: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 7oJLL7zhWEiqbqyFCp0XRre_3zXYrbSW X-Proofpoint-ORIG-GUID: 7oJLL7zhWEiqbqyFCp0XRre_3zXYrbSW X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 clxscore=1015 priorityscore=1501 malwarescore=0 mlxlogscore=999 lowpriorityscore=0 impostorscore=0 mlxscore=0 adultscore=0 bulkscore=0 spamscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230060 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: During host driver init, the phy_gear is set to the minimum supported gear (HS_G2). Then, during the first power mode change, the negotiated gear, say HS-G4, is updated to the phy_gear variable so that in the second init the updated phy_gear can be used to program the PHY. But the current code only allows update the phy_gear to a higher value. If one wants to start the first init with the maximum support gear, say HS-G4, the phy_gear is not updated to HS-G3 if the device only supports HS-G3. The original check added there is intend to make sure the phy_gear won't be updated when gear is scaled down (during clock scaling). Update the check so that one can start the first init with the maximum support gear without breaking the original fix by checking the ufshcd_state, that is, allow update to phy_gear only if power mode change is invoked from ufshcd_probe_hba(). This change is a preparation patch for the next patches in the same series. Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index d4edf58..9613ad9 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -916,16 +916,19 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, } /* - * Update phy_gear only when the gears are scaled to a higher value. This is - * because, the PHY gear settings are backwards compatible and we only need to - * change the PHY gear settings while scaling to higher gears. + * During UFS driver probe, always update the PHY gear to match the negotiated + * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, + * the second init can program the optimal PHY settings. This allows one to start + * the first init with either the minimum or the maximum support gear. */ - if (dev_req_params->gear_tx > host->phy_gear) { + if (hba->ufshcd_state == UFSHCD_STATE_RESET) { u32 old_phy_gear = host->phy_gear; host->phy_gear = dev_req_params->gear_tx; - dev_req_params->gear_tx = old_phy_gear; - dev_req_params->gear_rx = old_phy_gear; + if (dev_req_params->gear_tx > old_phy_gear) { + dev_req_params->gear_tx = old_phy_gear; + dev_req_params->gear_rx = old_phy_gear; + } } /* enable the device ref clock before changing to HS mode */ From patchwork Thu Nov 23 08:36:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 746607 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Uzxf7202" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4F82E1BF; Thu, 23 Nov 2023 00:36:48 -0800 (PST) Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN0nq9O030861; Thu, 23 Nov 2023 08:36:36 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=bOrJSSNFsLGbiSSB8YF589JZQLsAbNb5oTKc3fog6kw=; b=Uzxf7202hSQYatvU+tTDFf1DUzSmnGKuB2xYPa9oNHjoXBRT3CleDLn33hbvcKJMaHsr Mbyf0nBbvuwjWPvZIY5YMHkWe8FsfmrcZ6OrIjtFdb0equtLL+RpxP7ie35kbNSmASww +4Tx/oXLMHm02ARkT0DIc3zZMrlat3GsG4e3pa0b1AOThgni9xaXZvBpNiMyuN4Kf5fK 7BbDsMgQqp91I7ge2Oo0J2vebrPSZpdIuIbyC1o8uRlmDZkyOI+DNbciwt1szPNlI4x6 +x/1pFpW/uEctS85tO4l5DUWPijgQ2mI8SxHb6dvt9RUjhKMA+7aNFBex9Oh3S8brDUA Hg== Received: from nasanppmta01.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhf66au4q-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:36:36 +0000 Received: from pps.filterd (NASANPPMTA01.qualcomm.com [127.0.0.1]) by NASANPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8YNkp014146; Thu, 23 Nov 2023 08:36:35 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3ughrmnvd9-1; Thu, 23 Nov 2023 08:36:35 +0000 Received: from NASANPPMTA01.qualcomm.com (NASANPPMTA01.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8aYUZ016859; Thu, 23 Nov 2023 08:36:34 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3AN8aYsD016858; Thu, 23 Nov 2023 08:36:34 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 6796220A68; Thu, 23 Nov 2023 00:36:34 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-arm-msm@vger.kernel.org (open list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5 Date: Thu, 23 Nov 2023 00:36:12 -0800 Message-Id: <1700728577-14729-7-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> References: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: C7syce5Qj9Wt339Wd1S4ailIKGMx3eVK X-Proofpoint-GUID: C7syce5Qj9Wt339Wd1S4ailIKGMx3eVK X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 adultscore=0 clxscore=1015 bulkscore=0 mlxlogscore=747 lowpriorityscore=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 impostorscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230060 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, so that the subsequent power mode changes shall stick to Rate-A. Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 9613ad9..6756f8d 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -442,9 +442,25 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_host_params *host_params = &host->host_params; struct phy *phy = host->generic_phy; + enum phy_mode mode; int ret; + /* + * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. + * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, + * so that the subsequent power mode change shall stick to Rate-A. + */ + if (host->hw_ver.major == 0x5) { + if (host->phy_gear == UFS_HS_G5) + host_params->hs_rate = PA_HS_MODE_A; + else + host_params->hs_rate = PA_HS_MODE_B; + } + + mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; + /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); if (ret) @@ -459,7 +475,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return ret; } - phy_set_mode_ext(phy, PHY_MODE_UFS_HS_B, host->phy_gear); + phy_set_mode_ext(phy, mode, host->phy_gear); /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); From patchwork Thu Nov 23 08:36:15 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 746606 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="DTmqprWC" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9DC4310CB; Thu, 23 Nov 2023 00:37:03 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN4Jbew027190; Thu, 23 Nov 2023 08:36:40 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=RK+ISXtFwgjPlNSziPYs8fChGhU8NEaiHWu0bD88e7M=; b=DTmqprWCZR7DsDZJEEP1FlPY+qWC4thraAyabfgCXegfIjO7BKH4SSh8WU6hWIKhex3a DgkOiaHmNNcip2kAxf4cE83Ue8nFV5YK5pXdLHrCyPHZ0OX71aEEpfwdNL/n5JZk/c06 yFJWhq668tsQ4ltfsXZcHWtPA3qKUlvuyA7iRbloQu8vDB6L2WU+k+u6/TfOiMTZMiL2 ztcqS1oXdrrWSxRqIfVQ+TFF/sYVGc6+sg6zerIvvd5rnaYYlJhSQjOGKeM+Nc90LVPp PEAeZKqMBudX3RF3n8q1T2uVALB6JlNzNAwlx+xMThqIfvFzxMsiuqXKZSz3RS3fQeCU OQ== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhvm0rwwe-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:36:39 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8WJTo002919; Thu, 23 Nov 2023 08:36:38 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3uhcusvqny-1; Thu, 23 Nov 2023 08:36:38 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8aIen008030; Thu, 23 Nov 2023 08:36:38 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3AN8ac85008623; Thu, 23 Nov 2023 08:36:38 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 1AF2B20A68; Thu, 23 Nov 2023 00:36:38 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Vinod Koul , Kishon Vijay Abraham I , linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT), linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Date: Thu, 23 Nov 2023 00:36:15 -0800 Message-Id: <1700728577-14729-10-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> References: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 1k3bRFyA2Dnp3tfB2DHH1Xp3C5viIR_T X-Proofpoint-ORIG-GUID: 1k3bRFyA2Dnp3tfB2DHH1Xp3C5viIR_T X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 phishscore=0 clxscore=1015 priorityscore=1501 spamscore=0 impostorscore=0 lowpriorityscore=0 mlxlogscore=999 mlxscore=0 adultscore=0 malwarescore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230060 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: On SM8550, two sets of UFS PHY settings are provided, one set is to support HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY settings are programming different values to different registers, mixing the two sets and/or overwriting one set with another set is definitely not blessed by UFS PHY designers. To add HS-G5 support for SM8550, split the two sets of PHY settings into their dedicated overlay tables, only the common parts of the two sets of PHY settings are left in the .tbls. Consider we are going to add even higher gear support in future, to avoid adding more tables with different names, rename the .tbls_hs_g4 and make it an array, a size of 2 is enough as of now. In this case, .tbls alone is not a complete set of PHY settings, so either tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the .tbls to become a complete set of PHY settings. Signed-off-by: Can Guo --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 2 + .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 9 ++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 180 ++++++++++++++++++--- 4 files changed, 172 insertions(+), 21 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h index c23d5e4..e563af5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -18,6 +18,7 @@ #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY 0x12c #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 #define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 @@ -27,5 +28,6 @@ #define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h index f420f8f..ef392ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -56,6 +56,8 @@ #define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 #define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_CMN_IETRIM 0xfc +#define QSERDES_V6_COM_CMN_IPTRIM 0x100 #define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 #define QSERDES_V6_COM_RESETSM_CNTRL 0x118 #define QSERDES_V6_COM_LOCK_CMP_EN 0x120 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 674f158..48f31c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -15,8 +15,15 @@ #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x24 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4 0x54 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0xdc +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0 +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 @@ -28,6 +35,8 @@ #define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL 0x2f8 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index ad91f92..b4cfc1a 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -41,6 +41,8 @@ #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define NUM_OVERLAY 2 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -649,15 +651,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), @@ -666,19 +675,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), }; -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), @@ -694,16 +708,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), - QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e), +}; + struct qmp_ufs_offsets { u16 serdes; u16 pcs; @@ -723,6 +766,8 @@ struct qmp_phy_cfg_tbls { int rx_num; const struct qmp_phy_init_tbl *pcs; int pcs_num; + /* Maximum supported Gear of this tbls */ + u32 max_gear; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -730,13 +775,15 @@ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; + /* Maximum supported Gear of this config */ + u32 max_supported_gear; /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_cfg_tbls tbls; /* Additional sequence for HS Series B */ const struct qmp_phy_cfg_tbls tbls_hs_b; - /* Additional sequence for HS G4 */ - const struct qmp_phy_cfg_tbls tbls_hs_g4; + /* Additional sequence for different HS Gears */ + const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY]; /* clock ids to be requested */ const char * const *clk_list; @@ -839,6 +886,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = msm8996_ufsphy_serdes, @@ -864,6 +912,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -879,13 +928,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -898,6 +948,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -913,13 +964,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -932,6 +984,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -960,6 +1013,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sm6115_ufsphy_serdes, @@ -988,6 +1042,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1016,6 +1071,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1031,13 +1087,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8150_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), .rx = sm8150_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1050,6 +1107,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1065,13 +1123,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sm8250_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1084,6 +1143,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1099,13 +1159,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1118,6 +1179,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1133,13 +1195,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1152,6 +1215,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8550_ufsphy_serdes, @@ -1167,6 +1231,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .serdes = sm8550_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), }, + .tbls_hs_overlay[0] = { + .serdes = sm8550_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8550_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .tbls_hs_overlay[1] = { + .serdes = sm8550_ufsphy_g5_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g5_serdes), + .rx = sm8550_ufsphy_g5_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g5_rx), + .pcs = sm8550_ufsphy_g5_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g5_pcs), + .max_gear = UFS_HS_G5, + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, @@ -1229,17 +1313,69 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); } -static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +static bool qmp_ufs_match_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg, int *i) { + u32 max_gear, floor_max_gear = cfg->max_supported_gear; + bool found = false; + int j; + + for (j = 0; j < NUM_OVERLAY; j ++) { + max_gear = cfg->tbls_hs_overlay[j].max_gear; + + if (max_gear == 0) + continue; + + /* Direct matching, bail */ + if (qmp->submode == max_gear) { + *i = j; + return true; + } + + /* If no direct matching, the lowest gear is the best matching */ + if (max_gear < floor_max_gear) { + *i = j; + found = true; + floor_max_gear = max_gear; + } + } + + return found; +} + +static int qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +{ + bool apply_overlay; + int i; + + if (qmp->submode > cfg->max_supported_gear || qmp->submode == 0) { + dev_err(qmp->dev, "Invalid PHY submode %u\n", qmp->submode); + return -EINVAL; + } + + pr_err("[DEBUG]%s: qmp->submode = %u, cfg->max_support_gear = %u\n", + __func__, qmp->submode, cfg->max_supported_gear); + + apply_overlay = qmp_ufs_match_gear_overlay(qmp, cfg, &i); + + pr_err("[DEBUG]%s: apply_overlay = %d, overlay index = %d\n", + __func__, apply_overlay, i); + qmp_ufs_serdes_init(qmp, &cfg->tbls); + if (apply_overlay) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[i]); + if (qmp->mode == PHY_MODE_UFS_HS_B) qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); + qmp_ufs_lanes_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_pcs_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_overlay[i]); + + return 0; } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -1331,7 +1467,9 @@ static int qmp_ufs_power_on(struct phy *phy) unsigned int val; int ret; - qmp_ufs_init_registers(qmp, cfg); + ret = qmp_ufs_init_registers(qmp, cfg); + if (ret) + return ret; ret = reset_control_deassert(qmp->ufs_reset); if (ret) From patchwork Thu Nov 23 08:36:16 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 746604 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="OpIA9zbx" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EE6BCD56; Thu, 23 Nov 2023 00:41:11 -0800 (PST) Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN5uFG9020347; Thu, 23 Nov 2023 08:36:41 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=DFF6SBown3zJI3vv5koqMtjckFgbW+mpaijN5lmrUrY=; b=OpIA9zbxNYBAFNRyegAJN0ZYE0fVwHTkkoybSVka+t4dGPDLnQ1ANWKQPVmPJmSPFn/n EqtZYFYeTklHBP1CVRvugmHUlB3oecQ0UbbH7GIUscniuApWLZLvT09W9xkCr5Lha8f7 CEtH+sc4UKqqZHk1LsFo7VL7n6wQlugVZVJ3Yw22t92/t6+aTlMBCIHG9pWYAsPUBP3j VNlAQh12t6iyfvfqkna78MkFe4JXhL5GOAgJoHI9UvkEz0AqSESlhapuFx2ZuOIwZ0me 8krMNiFblYLtz4sRk1nuycYzpe6gW50lZQouQnyADcq+xvvU251hb4KXADL70zw7diAS Ag== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhf6ktt5g-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:36:40 +0000 Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8Woqr021515; Thu, 23 Nov 2023 08:36:39 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3uhpmqphf1-1; Thu, 23 Nov 2023 08:36:39 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8YmAt023558; Thu, 23 Nov 2023 08:36:39 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3AN8adNT025579; Thu, 23 Nov 2023 08:36:39 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 1F5CC20A68; Thu, 23 Nov 2023 00:36:39 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, "Bao D. Nguyen" , Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v4 10/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection Date: Thu, 23 Nov 2023 00:36:16 -0800 Message-Id: <1700728577-14729-11-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> References: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: sarxo_8PsrxAcwn7jT4nyfLh0nNpcGjK X-Proofpoint-ORIG-GUID: sarxo_8PsrxAcwn7jT4nyfLh0nNpcGjK X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 lowpriorityscore=0 bulkscore=0 phishscore=0 priorityscore=1501 clxscore=1015 adultscore=0 mlxlogscore=999 spamscore=0 suspectscore=0 impostorscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230060 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: From: "Bao D. Nguyen" A spare register in UFS host controller is used to indicate the UFS device version. The spare register is populated by bootloader for now, but in future it will be populated by HW automatically during link startup with its best efforts in any boot stages prior to Linux. During host driver init, read the spare register, if it is not populated with a UFS device version, go ahead with the dual init mechanism. If a UFS device version is in there, use the UFS device version together with host controller's HW version to decide the proper PHY gear which should be used to configure the UFS PHY without going through the second init. Signed-off-by: Bao D. Nguyen Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 23 ++++++++++++++++++----- drivers/ufs/host/ufs-qcom.h | 2 ++ 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 7bbccf4..70bedd9 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -1070,15 +1070,28 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) { struct ufs_host_params *host_params = &host->host_params; + u32 val, dev_major = 0; host->phy_gear = host_params->hs_tx_gear; - /* - * Power up the PHY using the minimum supported gear (UFS_HS_G2). - * Switching to max gear will be performed during reinit if supported. - */ - if (host->hw_ver.major < 0x5) + if (host->hw_ver.major < 0x5) { + /* + * Power up the PHY using the minimum supported gear (UFS_HS_G2). + * Switching to max gear will be performed during reinit if supported. + */ host->phy_gear = UFS_HS_G2; + } else { + val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); + dev_major = FIELD_GET(GENMASK(7, 4), val); + + /* UFS device version populated, no need to do init twice */ + if (dev_major != 0) + host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; + + /* For UFS 3.1 and older, apply HS-G4 PHY gear to save power */ + if (dev_major < 0x4 && dev_major > 0) + host->phy_gear = UFS_HS_G4; + } } static void ufs_qcom_set_host_params(struct ufs_hba *hba) diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 11419eb..d12fc5a 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -54,6 +54,8 @@ enum { UFS_AH8_CFG = 0xFC, REG_UFS_CFG3 = 0x271C, + + REG_UFS_DEBUG_SPARE_CFG = 0x284C, }; /* QCOM UFS host controller vendor specific debug registers */