From patchwork Sat Jun 27 00:10:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 191931 Delivered-To: patch@linaro.org Received: by 2002:a92:d244:0:0:0:0:0 with SMTP id v4csp945305ilg; Fri, 26 Jun 2020 17:10:22 -0700 (PDT) X-Google-Smtp-Source: ABdhPJx/4SKeRslvIykcKCG0t1ri/rS/p6WOqsmD3Ixoq0wwVSeUCDzWISTEuI0vrhFEXc9o+ggA X-Received: by 2002:a17:906:b292:: with SMTP id q18mr4969940ejz.253.1593216622071; Fri, 26 Jun 2020 17:10:22 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1593216622; cv=none; d=google.com; s=arc-20160816; b=BeOOr08cF4ohGlubwQqbunbk9c7Kg3iMehAv4NZE/nZmcTIfsWoC1fct2pjfgdhVnV ltrUmXUuXAhC0Hu+41jyx6Z430yBUP8q9UBb1EYeUR07wZRrBe6GWFwwuNnFGT3PEXVI Syw7tGF6QdCvyBdo7tcu26hdD2/U6qMJIX30Snk7XCEAbNTiUCHmpB2PjJxG2JOpmf/E WmtfHPkn1VXTktZMmH3qdcJuEKTT31TT7ee1PG2YW0ZWQwqvpVjpm3r6Kntbxr4VOoy/ EsWUa91wTh9jXds1rvVMyv9gMZg/VfeQ0l6u/9HDz88JG9Lm7dZCtqx6+wDE5MzM51IC NEPg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :message-id:date:subject:cc:to:from:dkim-signature; bh=Ld5PGWaH8xtpVt5DTCi9Hfpk3jUZ1QbhkvNzqqXUeK0=; b=Q0tYKErTN6riqO6sEFVAIg/RsW8lW3cXohxc5N5ohx298xkCG5BcuL9T3T/y38lwFP 4n2RqeTpOaLpIFxrsiueHLraf6K+IXmvVLkdl396bLLtevfvdV3i6g7AXd9IkSwvHlRD PiaNFm6ln3iPORPzEI3fJFTzaU3KoDxIIIVmMiVk+CgQIL2aPLE1Y3bREBqOVF2T941M 6/gbMa1sBFIthDQgODdn8tkLCHcTxQlKtbIandfpkmsaS/PbQGA26ke9nT19QAi8nvXI DIBYITQDksWN0GqikStvwfsvBFDjs9bnRPpm/udhsmnHdH4ZTWwGordy0B3vvi0xjkE4 b5mA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=vacDk+jT; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id dr2si21773155ejc.18.2020.06.26.17.10.21; Fri, 26 Jun 2020 17:10:22 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=vacDk+jT; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726429AbgF0AKV (ORCPT + 1 other); Fri, 26 Jun 2020 20:10:21 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48380 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726079AbgF0AKU (ORCPT ); Fri, 26 Jun 2020 20:10:20 -0400 Received: from mail-lj1-x243.google.com (mail-lj1-x243.google.com [IPv6:2a00:1450:4864:20::243]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 42CFDC03E979 for ; Fri, 26 Jun 2020 17:10:20 -0700 (PDT) Received: by mail-lj1-x243.google.com with SMTP id i3so12091714ljg.3 for ; Fri, 26 Jun 2020 17:10:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=Ld5PGWaH8xtpVt5DTCi9Hfpk3jUZ1QbhkvNzqqXUeK0=; b=vacDk+jTBNIWAzAKlAsufWBgrEFVMZeLbynkOBA7XbLEoDQ2JkdqjtoMPzqFNp9ylv fcKnC8K0BjpN98gdQr+bvdXA9KXEpVHJnB+VTtaKq0Rs2oVW2BOcppHojC3mRRGVvmFW 8SDm8YzQJrTV6rhSkkvE9alLS9qucPM29f+q55hINQQmt+CnouTtV96Cn+OUyIIVW33L xWAUM6LXui/AmnyBADn41DD5yUmI8kx8O9YN7PPLOvDgKpX0XhyTpuad7xdVxMUf1EJH fj9dPDQN1hDWd57CQSyryYqZrvRElduUnR31BQB5sWxNKfrCM881KcQFFoP67i+fF2i+ fyPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=Ld5PGWaH8xtpVt5DTCi9Hfpk3jUZ1QbhkvNzqqXUeK0=; b=SZXnEhF5c4ZccHXpvKDCt+kGv9DQlJF0sPQ2j6d8+Mrqd5M4Y/4T5FZdCtdZ1z4X8A 81YtkO1A/S4R+uDuxdIxylPj5DxqPz5ejymQyzdyCPIDwr5JWQR7aatqHtdB3f0UwBzn bD6GzEFdasVljLZKt6TwdSo2AmG7ZGATPv/1CpFG2+E3bgV07jEkjvsNLb0cxlOt6sQs N0yEphtevLYMuhEICJXIWIslhxN6FcNAtKx2g4zPKuJiOdG1+jMMol9ZBh/30hfrUxsG +tzOeui0hQuvap/L4nP8vBBoYh3kOL62VR8Ejv1uola5taxtDHTsWQzNTeX/NchQGWXf cXqA== X-Gm-Message-State: AOAM530BQIVuHo3rgyNfDYPz/UXZj5xPfDsdHMFBv8Wk9oyFceKv5LGA RnJ83KySLnL+O6HrxjNKzPkLBw== X-Received: by 2002:a05:651c:1193:: with SMTP id w19mr2744874ljo.121.1593216618548; Fri, 26 Jun 2020 17:10:18 -0700 (PDT) Received: from genomnajs.lan (c-d63ee155.152980-0-69706f6e6c79.bbcust.telenor.se. [85.225.62.214]) by smtp.gmail.com with ESMTPSA id f129sm7084043lfd.6.2020.06.26.17.10.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 26 Jun 2020 17:10:17 -0700 (PDT) From: Linus Walleij To: Jacek Anaszewski , Pavel Machek , Dan Murphy Cc: linux-leds@vger.kernel.org, Linus Walleij , Ben Dooks , Sylwester Nawrocki , Krzysztof Kozlowski Subject: [PATCH] leds: s3c24xx: Convert to use GPIO descriptors Date: Sat, 27 Jun 2020 02:10:15 +0200 Message-Id: <20200627001015.427376-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.25.4 MIME-Version: 1.0 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org This converts the s3c24xx LED driver to use GPIO descriptors and also modify all board files to account for these changes by registering the appropriate GPIO tables for each board. The driver was using a custom flag to indicate open drain (tristate) but this can be handled by standard descriptor machine tables. The driver was setting non-pull-up for the pin using the custom S3C24xx GPIO API, but this is a custom pin control system used by the S3C24xx and no generic GPIO function, so this has simply been pushed back into the respective board files. Cc: Ben Dooks Cc: Sylwester Nawrocki Cc: Krzysztof Kozlowski Signed-off-by: Linus Walleij --- arch/arm/mach-s3c24xx/common-smdk.c | 67 +++++++++++++++------- arch/arm/mach-s3c24xx/mach-mini2440.c | 63 +++++++++++++++++--- arch/arm/mach-s3c24xx/mach-n30.c | 54 +++++++++++++++-- arch/arm/mach-s3c24xx/mach-qt2410.c | 12 +++- arch/arm/mach-s3c24xx/mach-vr1000.c | 38 +++++++++++- drivers/leds/leds-s3c24xx.c | 37 +++--------- include/linux/platform_data/leds-s3c24xx.h | 6 -- 7 files changed, 200 insertions(+), 77 deletions(-) -- 2.25.4 diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 58e30cad386c..10fc804c4ec5 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -44,29 +45,53 @@ /* LED devices */ +static struct gpiod_lookup_table smdk_led4_gpio_table = { + .dev_id = "s3c24xx_led.0", + .table = { + GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table smdk_led5_gpio_table = { + .dev_id = "s3c24xx_led.1", + .table = { + GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table smdk_led6_gpio_table = { + .dev_id = "s3c24xx_led.2", + .table = { + GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table smdk_led7_gpio_table = { + .dev_id = "s3c24xx_led.3", + .table = { + GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .gpio = S3C2410_GPF(4), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led4", .def_trigger = "timer", }; static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .gpio = S3C2410_GPF(5), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led5", .def_trigger = "nand-disk", }; static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .gpio = S3C2410_GPF(6), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led6", }; static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .gpio = S3C2410_GPF(7), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led7", }; @@ -179,27 +204,25 @@ static struct platform_device __initdata *smdk_devs[] = { &smdk_led7, }; -static const struct gpio smdk_led_gpios[] = { - { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, - { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, - { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, - { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL }, -}; - void __init smdk_machine_init(void) { - /* Configure the LEDs (even if we have no LED support)*/ - - int ret = gpio_request_array(smdk_led_gpios, - ARRAY_SIZE(smdk_led_gpios)); - if (!WARN_ON(ret < 0)) - gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios)); - if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; s3c_nand_set_platdata(&smdk_nand_info); + /* Disable pull-up on the LED lines */ + s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE); + + /* Add lookups for the lines */ + gpiod_add_lookup_table(&smdk_led4_gpio_table); + gpiod_add_lookup_table(&smdk_led5_gpio_table); + gpiod_add_lookup_table(&smdk_led6_gpio_table); + gpiod_add_lookup_table(&smdk_led7_gpio_table); + platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); s3c_pm_init(); diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9035f868fb34..11add63b79c2 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -402,37 +402,68 @@ static struct platform_device mini2440_button_device = { /* LEDS */ +static struct gpiod_lookup_table mini2440_led1_gpio_table = { + .dev_id = "s3c24xx_led.1", + .table = { + GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table mini2440_led2_gpio_table = { + .dev_id = "s3c24xx_led.2", + .table = { + GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table mini2440_led3_gpio_table = { + .dev_id = "s3c24xx_led.3", + .table = { + GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table mini2440_led4_gpio_table = { + .dev_id = "s3c24xx_led.4", + .table = { + GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + +static struct gpiod_lookup_table mini2440_led5_gpio_table = { + .dev_id = "s3c24xx_led.5", + .table = { + GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct s3c24xx_led_platdata mini2440_led1_pdata = { .name = "led1", - .gpio = S3C2410_GPB(5), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "heartbeat", }; static struct s3c24xx_led_platdata mini2440_led2_pdata = { .name = "led2", - .gpio = S3C2410_GPB(6), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "nand-disk", }; static struct s3c24xx_led_platdata mini2440_led3_pdata = { .name = "led3", - .gpio = S3C2410_GPB(7), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "mmc0", }; static struct s3c24xx_led_platdata mini2440_led4_pdata = { .name = "led4", - .gpio = S3C2410_GPB(8), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "", }; static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { .name = "backlight", - .gpio = S3C2410_GPG(4), .def_trigger = "backlight", }; @@ -714,6 +745,20 @@ static void __init mini2440_init(void) i2c_register_board_info(0, mini2440_i2c_devs, ARRAY_SIZE(mini2440_i2c_devs)); + /* Disable pull-up on the LED lines */ + s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE); + + /* Add lookups for the lines */ + gpiod_add_lookup_table(&mini2440_led1_gpio_table); + gpiod_add_lookup_table(&mini2440_led2_gpio_table); + gpiod_add_lookup_table(&mini2440_led3_gpio_table); + gpiod_add_lookup_table(&mini2440_led4_gpio_table); + gpiod_add_lookup_table(&mini2440_led5_gpio_table); + platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices)); if (features.count) /* the optional features */ diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index d856f23939af..58a64f6d5fd0 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,6 +45,7 @@ #include #include +#include #include #include #include @@ -246,17 +247,33 @@ static struct platform_device n35_button_device = { }; /* This is the bluetooth LED on the device. */ + +static struct gpiod_lookup_table n30_blue_led_gpio_table = { + .dev_id = "s3c24xx_led.1", + .table = { + GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct s3c24xx_led_platdata n30_blue_led_pdata = { .name = "blue_led", - .gpio = S3C2410_GPG(6), .def_trigger = "", }; /* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ + +static struct gpiod_lookup_table n35_blue_led_gpio_table = { + .dev_id = "s3c24xx_led.1", + .table = { + GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", - .gpio = S3C2410_GPD(8), .def_trigger = "", }; @@ -264,17 +281,30 @@ static struct s3c24xx_led_platdata n35_blue_led_pdata = { * red, blinking green or solid green when the battery is low, * charging or full respectively. By driving GPD9 low, it's possible * to force the LED to blink red, so call that warning LED. */ + +static struct gpiod_lookup_table n30_warning_led_gpio_table = { + .dev_id = "s3c24xx_led.2", + .table = { + GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct s3c24xx_led_platdata n30_warning_led_pdata = { .name = "warning_led", - .flags = S3C24XX_LEDF_ACTLOW, - .gpio = S3C2410_GPD(9), .def_trigger = "", }; +static struct gpiod_lookup_table n35_warning_led_gpio_table = { + .dev_id = "s3c24xx_led.2", + .table = { + GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + static struct s3c24xx_led_platdata n35_warning_led_pdata = { .name = "warning_led", - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .gpio = S3C2410_GPD(9), .def_trigger = "", }; @@ -577,6 +607,12 @@ static void __init n30_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); + /* Disable pull-up and add GPIO tables */ + s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(&n30_blue_led_gpio_table); + gpiod_add_lookup_table(&n30_warning_led_gpio_table); + platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices)); } @@ -594,6 +630,12 @@ static void __init n30_init(void) S3C2410_MISCCR_USBSUSPND1, S3C2410_MISCCR_USBSUSPND0); + /* Disable pull-up and add GPIO tables */ + s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(&n35_blue_led_gpio_table); + gpiod_add_lookup_table(&n35_warning_led_gpio_table); + platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } } diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 5d48e5b6e738..ff9e3197309b 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -177,9 +177,15 @@ static struct platform_device qt2410_cs89x0 = { /* LED */ +static struct gpiod_lookup_table qt2410_led_gpio_table = { + .dev_id = "s3c24xx_led.0", + .table = { + GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), + { }, + }, +}; + static struct s3c24xx_led_platdata qt2410_pdata_led = { - .gpio = S3C2410_GPB(0), - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led", .def_trigger = "timer", }; @@ -338,6 +344,8 @@ static void __init qt2410_machine_init(void) s3c_i2c0_set_platdata(NULL); gpiod_add_lookup_table(&qt2410_spi_gpiod_table); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(&qt2410_led_gpio_table); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); } diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 853e74f9b8b5..6a3fb2becc7c 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -40,6 +41,7 @@ #include #include +#include #include #include "bast.h" @@ -223,21 +225,42 @@ static struct platform_device vr1000_dm9k1 = { /* LEDS */ +static struct gpiod_lookup_table vr1000_led1_gpio_table = { + .dev_id = "s3c24xx_led.1", + .table = { + GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table vr1000_led2_gpio_table = { + .dev_id = "s3c24xx_led.2", + .table = { + GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table vr1000_led3_gpio_table = { + .dev_id = "s3c24xx_led.3", + .table = { + GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct s3c24xx_led_platdata vr1000_led1_pdata = { .name = "led1", - .gpio = S3C2410_GPB(0), .def_trigger = "", }; static struct s3c24xx_led_platdata vr1000_led2_pdata = { .name = "led2", - .gpio = S3C2410_GPB(1), .def_trigger = "", }; static struct s3c24xx_led_platdata vr1000_led3_pdata = { .name = "led3", - .gpio = S3C2410_GPB(2), .def_trigger = "", }; @@ -317,6 +340,15 @@ static void __init vr1000_init_time(void) static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); + + /* Disable pull-up on LED lines and register GPIO lookups */ + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(&vr1000_led1_gpio_table); + gpiod_add_lookup_table(&vr1000_led2_gpio_table); + gpiod_add_lookup_table(&vr1000_led3_gpio_table); + platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); i2c_register_board_info(0, vr1000_i2c_devs, diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c index f8b8d6e313ee..3734173596bf 100644 --- a/drivers/leds/leds-s3c24xx.c +++ b/drivers/leds/leds-s3c24xx.c @@ -11,19 +11,19 @@ #include #include #include -#include +#include #include #include #include #include -#include /* our context */ struct s3c24xx_gpio_led { struct led_classdev cdev; struct s3c24xx_led_platdata *pdata; + struct gpio_desc *gpiod; }; static inline struct s3c24xx_gpio_led *to_gpio(struct led_classdev *led_cdev) @@ -35,20 +35,9 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev, enum led_brightness value) { struct s3c24xx_gpio_led *led = to_gpio(led_cdev); - struct s3c24xx_led_platdata *pd = led->pdata; - int state = (value ? 1 : 0) ^ (pd->flags & S3C24XX_LEDF_ACTLOW); + int state = (value ? 1 : 0); - /* there will be a short delay between setting the output and - * going from output to input when using tristate. */ - - gpio_set_value(pd->gpio, state); - - if (pd->flags & S3C24XX_LEDF_TRISTATE) { - if (value) - gpio_direction_output(pd->gpio, state); - else - gpio_direction_input(pd->gpio); - } + gpiod_set_value(led->gpiod, state); } static int s3c24xx_led_probe(struct platform_device *dev) @@ -69,22 +58,12 @@ static int s3c24xx_led_probe(struct platform_device *dev) led->pdata = pdata; - ret = devm_gpio_request(&dev->dev, pdata->gpio, "S3C24XX_LED"); - if (ret < 0) - return ret; - - /* no point in having a pull-up if we are always driving */ - - s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE); - - if (pdata->flags & S3C24XX_LEDF_TRISTATE) - gpio_direction_input(pdata->gpio); - else - gpio_direction_output(pdata->gpio, - pdata->flags & S3C24XX_LEDF_ACTLOW ? 1 : 0); + /* Default to off */ + led->gpiod = devm_gpiod_get(&dev->dev, NULL, GPIOD_OUT_LOW); + if (IS_ERR(led->gpiod)) + return PTR_ERR(led->gpiod); /* register our new led device */ - ret = devm_led_classdev_register(&dev->dev, &led->cdev); if (ret < 0) dev_err(&dev->dev, "led_classdev_register failed\n"); diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h index 5bbae85811e2..64f8d14876e0 100644 --- a/include/linux/platform_data/leds-s3c24xx.h +++ b/include/linux/platform_data/leds-s3c24xx.h @@ -10,13 +10,7 @@ #ifndef __LEDS_S3C24XX_H #define __LEDS_S3C24XX_H -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - char *name; char *def_trigger; };