From patchwork Tue Jun 30 16:56:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 243146 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Tue, 30 Jun 2020 12:56:47 -0400 Subject: [PATCH 1/4] am335x: Update list of defconfigs Message-ID: <20200630165650.9540-1-trini@konsulko.com> Both the am335x_boneblack and am335x_evm_usbspl configs have been gone for a while, remove their entries from MAINTAINERS. Signed-off-by: Tom Rini --- board/ti/am335x/MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/board/ti/am335x/MAINTAINERS b/board/ti/am335x/MAINTAINERS index 565f7055cdd3..e100adfd68ec 100644 --- a/board/ti/am335x/MAINTAINERS +++ b/board/ti/am335x/MAINTAINERS @@ -3,7 +3,5 @@ M: Tom Rini S: Maintained F: board/ti/am335x/ F: include/configs/am335x_evm.h -F: configs/am335x_boneblack_defconfig F: configs/am335x_boneblack_vboot_defconfig F: configs/am335x_evm_defconfig -F: configs/am335x_evm_usbspl_defconfig From patchwork Tue Jun 30 16:56:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 243147 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Tue, 30 Jun 2020 12:56:48 -0400 Subject: [PATCH 2/4] omap3_beagle: Disable USB support In-Reply-To: <20200630165650.9540-1-trini@konsulko.com> References: <20200630165650.9540-1-trini@konsulko.com> Message-ID: <20200630165650.9540-2-trini@konsulko.com> Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline. Cc: Adam Ford Signed-off-by: Tom Rini --- configs/omap3_beagle_defconfig | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index ed7cb8f2ff63..236a4f4f5f5a 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_SPL=y CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start" @@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_UUID=y @@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1 @@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_OMAP2PLUS=y -CONFIG_TWL4030_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="TI" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y CONFIG_VIDEO_OMAP3=y CONFIG_FAT_WRITE=y CONFIG_BCH=y From patchwork Tue Jun 30 16:56:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 243148 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Tue, 30 Jun 2020 12:56:49 -0400 Subject: [PATCH 3/4] ti816x_evm: Enable DM_MMC In-Reply-To: <20200630165650.9540-1-trini@konsulko.com> References: <20200630165650.9540-1-trini@konsulko.com> Message-ID: <20200630165650.9540-3-trini@konsulko.com> This platform is already using DM in general and the MMC controller is the early generation of what is compatible with "ti,omap4-hsmmc" so enable DM_MMC (which in turn gets BLK enabled). Signed-off-by: Tom Rini --- configs/ti816x_evm_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 17aa6a02067c..033d35df4d02 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -47,6 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_OMAP24XX=y +CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y From patchwork Tue Jun 30 16:56:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 243149 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Tue, 30 Jun 2020 12:56:50 -0400 Subject: [PATCH 4/4] ti814x: Remove platform In-Reply-To: <20200630165650.9540-1-trini@konsulko.com> References: <20200630165650.9540-1-trini@konsulko.com> Message-ID: <20200630165650.9540-4-trini@konsulko.com> The TI814x (DM814x) platform is rather old and in need of a lot of migration work. As much of that work is well past the deadline, remove this platform. Signed-off-by: Tom Rini --- arch/arm/mach-omap2/Kconfig | 1 - board/ti/ti814x/Kconfig | 15 --- board/ti/ti814x/MAINTAINERS | 6 -- board/ti/ti814x/Makefile | 11 -- board/ti/ti814x/evm.c | 190 ----------------------------------- board/ti/ti814x/evm.h | 8 -- board/ti/ti814x/mux.c | 86 ---------------- configs/ti814x_evm_defconfig | 45 --------- 8 files changed, 362 deletions(-) delete mode 100644 board/ti/ti814x/Kconfig delete mode 100644 board/ti/ti814x/MAINTAINERS delete mode 100644 board/ti/ti814x/Makefile delete mode 100644 board/ti/ti814x/evm.c delete mode 100644 board/ti/ti814x/evm.h delete mode 100644 board/ti/ti814x/mux.c delete mode 100644 configs/ti814x_evm_defconfig diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4c87cbc00f74..48bc80a6390a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -181,7 +181,6 @@ source "board/BuR/brppt1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" -source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig" diff --git a/board/ti/ti814x/Kconfig b/board/ti/ti814x/Kconfig deleted file mode 100644 index 2960099a8e5b..000000000000 --- a/board/ti/ti814x/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TI814X_EVM - -config SYS_BOARD - default "ti814x" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "ti814x_evm" - -endif diff --git a/board/ti/ti814x/MAINTAINERS b/board/ti/ti814x/MAINTAINERS deleted file mode 100644 index b2ee39e8a339..000000000000 --- a/board/ti/ti814x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TI814X BOARD -M: Tom Rini -S: Maintained -F: board/ti/ti814x/ -F: include/configs/ti814x_evm.h -F: configs/ti814x_evm_defconfig diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile deleted file mode 100644 index c5ff8d072851..000000000000 --- a/board/ti/ti814x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - -ifdef CONFIG_SPL_BUILD -obj-y := mux.o -endif - -obj-y += evm.o diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c deleted file mode 100644 index 8ed80d2f4627..000000000000 --- a/board/ti/ti814x/evm.c +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * evm.c - * - * Board functions for TI814x EVM - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "evm.h" - -DECLARE_GLOBAL_DATA_PTR; - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -/* UART Defines */ -#ifdef CONFIG_SPL_BUILD -static const struct cmd_control evm_ddr2_cctrl_data = { - .cmd0csratio = 0x80, - .cmd0iclkout = 0x00, - - .cmd1csratio = 0x80, - .cmd1iclkout = 0x00, - - .cmd2csratio = 0x80, - .cmd2iclkout = 0x00, -}; - -static const struct emif_regs evm_ddr2_emif0_regs = { - .sdram_config = 0x40801ab2, - .ref_ctrl = 0x10000c30, - .sdram_tim1 = 0x0aaaf552, - .sdram_tim2 = 0x043631d2, - .sdram_tim3 = 0x00000327, - .emif_ddr_phy_ctlr_1 = 0x00000007 -}; - -static const struct emif_regs evm_ddr2_emif1_regs = { - .sdram_config = 0x40801ab2, - .ref_ctrl = 0x10000c30, - .sdram_tim1 = 0x0aaaf552, - .sdram_tim2 = 0x043631d2, - .sdram_tim3 = 0x00000327, - .emif_ddr_phy_ctlr_1 = 0x00000007 -}; - -const struct dmm_lisa_map_regs evm_lisa_map_regs = { - .dmm_lisa_map_0 = 0x00000000, - .dmm_lisa_map_1 = 0x00000000, - .dmm_lisa_map_2 = 0x806c0300, - .dmm_lisa_map_3 = 0x806c0300, -}; - -static const struct ddr_data evm_ddr2_data = { - .datardsratio0 = ((0x35<<10) | (0x35<<0)), - .datawdsratio0 = ((0x20<<10) | (0x20<<0)), - .datawiratio0 = ((0<<10) | (0<<0)), - .datagiratio0 = ((0<<10) | (0<<0)), - .datafwsratio0 = ((0x90<<10) | (0x90<<0)), - .datawrsratio0 = ((0x50<<10) | (0x50<<0)), -}; - -void set_uart_mux_conf(void) -{ - /* Set UART pins */ - enable_uart0_pin_mux(); -} - -void set_mux_conf_regs(void) -{ - /* Set MMC pins */ - enable_mmc1_pin_mux(); - - /* Set Ethernet pins */ - enable_enet_pin_mux(); -} - -void sdram_init(void) -{ - config_dmm(&evm_lisa_map_regs); - - config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data, - &evm_ddr2_emif0_regs, 0); - config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data, - &evm_ddr2_emif1_regs, 1); -} -#endif - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - return 0; -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(1, 0, 0, -1, -1); - - return 0; -} -#endif - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x50, - .sliver_reg_ofs = 0x700, - .phy_addr = 1, - }, - { - .slave_reg_ofs = 0x90, - .sliver_reg_ofs = 0x740, - .phy_addr = 0, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x100, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0x600, - .ale_entries = 1024, - .host_port_reg_ofs = 0x28, - .hw_stats_reg_ofs = 0x400, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_1, -}; -#endif - -int board_eth_init(bd_t *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - printf(" not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - else - printf("Unable to read MAC address. Set \n"); - } - - return cpsw_register(&cpsw_data); -} diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h deleted file mode 100644 index 6aebec62d4a4..000000000000 --- a/board/ti/ti814x/evm.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _EVM_H -#define _EVM_H - -void enable_uart0_pin_mux(void); -void enable_mmc1_pin_mux(void); -void enable_enet_pin_mux(void); - -#endif /* _EVM_H */ diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c deleted file mode 100644 index fd9f36451158..000000000000 --- a/board/ti/ti814x/mux.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * mux.c - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include "evm.h" - -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */ - {OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */ - {-1}, -}; - -static struct module_pin_mux mmc1_pin_mux[] = { - {OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */ - {OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */ - {OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */ - {OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */ - {OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */ - {OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */ - {OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */ - {OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */ - {OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */ - {-1}, -}; - -static struct module_pin_mux enet_pin_mux[] = { - {OFFSET(pincntl232), MODE(0x01)}, /* EMAC_RMREFCLK */ - {OFFSET(pincntl233), PULLUP_EN | MODE(0x01)}, /* MDCLK */ - {OFFSET(pincntl234), PULLUP_EN | MODE(0x01)}, /* MDIO */ - {OFFSET(pincntl235), MODE(0x01)}, /* EMAC[0]_MTCLK */ - {OFFSET(pincntl236), MODE(0x01)}, /* EMAC[0]_MCOL */ - {OFFSET(pincntl237), MODE(0x01)}, /* EMAC[0]_MCRS */ - {OFFSET(pincntl238), MODE(0x01)}, /* EMAC[0]_MRXER */ - {OFFSET(pincntl239), MODE(0x01)}, /* EMAC[0]_MRCLK */ - {OFFSET(pincntl240), MODE(0x01)}, /* EMAC[0]_MRXD[0] */ - {OFFSET(pincntl241), MODE(0x01)}, /* EMAC[0]_MRXD[1] */ - {OFFSET(pincntl242), MODE(0x01)}, /* EMAC[0]_MRXD[2] */ - {OFFSET(pincntl243), MODE(0x01)}, /* EMAC[0]_MRXD[3] */ - {OFFSET(pincntl244), MODE(0x01)}, /* EMAC[0]_MRXD[4] */ - {OFFSET(pincntl245), MODE(0x01)}, /* EMAC[0]_MRXD[5] */ - {OFFSET(pincntl246), MODE(0x01)}, /* EMAC[0]_MRXD[6] */ - {OFFSET(pincntl247), MODE(0x01)}, /* EMAC[0]_MRXD[7] */ - {OFFSET(pincntl248), MODE(0x01)}, /* EMAC[0]_MRXDV */ - {OFFSET(pincntl249), MODE(0x01)}, /* EMAC[0]_GMTCLK */ - {OFFSET(pincntl250), MODE(0x01)}, /* EMAC[0]_MTXD[0] */ - {OFFSET(pincntl251), MODE(0x01)}, /* EMAC[0]_MTXD[1] */ - {OFFSET(pincntl252), MODE(0x01)}, /* EMAC[0]_MTXD[2] */ - {OFFSET(pincntl253), MODE(0x01)}, /* EMAC[0]_MTXD[3] */ - {OFFSET(pincntl254), MODE(0x01)}, /* EMAC[0]_MTXD[4] */ - {OFFSET(pincntl255), MODE(0x01)}, /* EMAC[0]_MTXD[5] */ - {OFFSET(pincntl256), MODE(0x01)}, /* EMAC[0]_MTXD[6] */ - {OFFSET(pincntl257), MODE(0x01)}, /* EMAC[0]_MTXD[7] */ - {OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */ -}; - -void enable_uart0_pin_mux(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void enable_mmc1_pin_mux(void) -{ - configure_module_pin_mux(mmc1_pin_mux); -} - -void enable_enet_pin_mux(void) -{ - configure_module_pin_mux(enet_pin_mux); -} diff --git a/configs/ti814x_evm_defconfig b/configs/ti814x_evm_defconfig deleted file mode 100644 index 71c9119c7d06..000000000000 --- a/configs/ti814x_evm_defconfig +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TI814X=y -CONFIG_TARGET_TI814X_EVM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_BOOTDELAY=1 -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_MISC_INIT_R is not set -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_HUSH_PARSER=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="U-Boot# " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_PHY_ET1011C=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y