Toggle navigation
Patchwork
linux-usb
Patches
Bundles
About this project
Login
Register
Mail settings
Show patches with
: Submitter =
Frank Li
| State =
Action Required
| Archived =
No
| 44 patches
Series
Submitter
State
any
Action Required
New
Under Review
Accepted
Rejected
RFC
Not Applicable
Changes Requested
Awaiting Upstream
Superseded
Deferred
Search
Archived
No
Yes
Both
Delegate
------
Nobody
andy.doan@linaro.org
andy.doan@linaro.org
Apply
Patch
Series
S/W/F
Date
Submitter
Delegate
State
[v5,3/3] usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
usb: imx8mp: collect some improvement
-
-
-
2024-09-06
Frank Li
New
[v5,2/3] usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: imx8mp: collect some improvement
-
-
-
2024-09-06
Frank Li
New
[v5,1/3] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
usb: imx8mp: collect some improvement
-
-
-
2024-09-06
Frank Li
New
[v4,2/3] usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: imx8mp: collect some improvement
-
-
-
2024-09-05
Frank Li
New
[1/1] dt-bindings: usb: add layerscape super speed usb support
[1/1] dt-bindings: usb: add layerscape super speed usb support
-
-
-
2024-08-15
Frank Li
New
[3/4] usb: dwc3: core: add a core init flag for device mode resume
[1/4] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
-
-
-
2024-07-12
Frank Li
New
[3/3] arm64: dts: layerscape: move dwc3 usb under glue layer node
usb: dwc3: add fsl,ls-dwc3 glue layer support
-
-
-
2024-07-10
Frank Li
New
[2/3] usb: dwc3: of-simple: Add compatible string fsl,ls1028a-dwc3
usb: dwc3: add fsl,ls-dwc3 glue layer support
-
-
-
2024-07-10
Frank Li
New
[1/3] dt-bindings: usb: Add fsl,ls-dwc3.yaml for layerscape usb3 glue layer
usb: dwc3: add fsl,ls-dwc3 glue layer support
-
-
-
2024-07-10
Frank Li
New
[2/2] usb: dwc3: Set cache type to 'snoop' for freescale layerscape chip
usb: dwc3: Add cache type configuration support for freescale layerscape
-
-
-
2024-07-03
Frank Li
New
[1/2] dt-bindings: usb: Add chip-specific compatible string 'fsl,ls-dwc3'
usb: dwc3: Add cache type configuration support for freescale layerscape
-
-
-
2024-07-03
Frank Li
New
[v2,1/1] dt-bindings: usb: Convert fsl-usb to yaml
[v2,1/1] dt-bindings: usb: Convert fsl-usb to yaml
-
-
-
2024-06-27
Frank Li
New
[1/1] dt-bindings: usb: Convert fsl-usb to yaml
[1/1] dt-bindings: usb: Convert fsl-usb to yaml
-
-
-
2024-06-25
Frank Li
New
[v2,1/1] dt-bindings: usb: cdns,usb3: use common usb-drd yaml
[v2,1/1] dt-bindings: usb: cdns,usb3: use common usb-drd yaml
-
-
-
2024-06-07
Frank Li
New
[1/1] dt-bindings: usb: cdns,usb3: use common usb-drd yaml
[1/1] dt-bindings: usb: cdns,usb3: use common usb-drd yaml
-
-
-
2024-06-06
Frank Li
New
[v2,2/2] usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally
usb: dwc3: drop 'snps,host-vbus-glitches-quirk'
-
-
-
2024-02-12
Frank Li
New
[1/2] dt-bindings: usb: dwc3: drop 'quirk' suffix at snps,host-vbus-glitches-quirk
[1/2] dt-bindings: usb: dwc3: drop 'quirk' suffix at snps,host-vbus-glitches-quirk
-
-
-
2024-02-07
Frank Li
New
[2/2] usb: cdns3: fix memory double free when handle zero package
[1/2] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
-
-
-
2024-02-02
Frank Li
New
[1/2] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
[1/2] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
-
-
-
2024-02-02
Frank Li
New
[2/2] usb: dwc3: core: allow overwrite reqinfo in GSBUSCFG0 by dts
Untitled series #233386
-
-
-
2024-01-23
Frank Li
New
[v3,3/3] usb: dwc3: Add workaround for host mode VBUS glitch when boot
[v3,1/3] XHCI: Separate PORT and CAPs macros into dedicated file
-
-
-
2024-01-23
Frank Li
New
[v3,1/3] XHCI: Separate PORT and CAPs macros into dedicated file
[v3,1/3] XHCI: Separate PORT and CAPs macros into dedicated file
-
-
-
2024-01-23
Frank Li
New
[2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
[1/2] dt-bindings: usb: dwc3: Add snps,host-vbus-glitches avoiding vbus glitch
-
-
-
2024-01-19
Frank Li
New
[1/2] dt-bindings: usb: dwc3: Add snps,host-vbus-glitches avoiding vbus glitch
[1/2] dt-bindings: usb: dwc3: Add snps,host-vbus-glitches avoiding vbus glitch
-
-
-
2024-01-19
Frank Li
New
[v2,4/4] Revert "usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()"
usb: cdns3: usb uvc iso transfer fix
-
-
-
2023-12-24
Frank Li
New
[v2,3/4] usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled
usb: cdns3: usb uvc iso transfer fix
-
-
-
2023-12-24
Frank Li
New
[v2,2/4] usb: cdns3: fix iso transfer error when mult is not zero
usb: cdns3: usb uvc iso transfer fix
-
-
-
2023-12-24
Frank Li
New
[v2,1/4] usb: cdns3: fix uvc failure work since sg support enabled
usb: cdns3: usb uvc iso transfer fix
-
-
-
2023-12-24
Frank Li
New
[4/4] Revert "usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()"
usb: cdns3: usb uvc iso transfer fix
-
-
-
2023-12-21
Frank Li
New
[v2,2/2] usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
[v2,1/2] usb: gadget: call usb_gadget_check_config() to verify UDC capability
-
-
-
2023-07-07
Frank Li
New
[v2,1/2] usb: gadget: call usb_gadget_check_config() to verify UDC capability
[v2,1/2] usb: gadget: call usb_gadget_check_config() to verify UDC capability
-
-
-
2023-07-07
Frank Li
New
[2/2] usb: cdns3: optimize OUT transfer by copying only actual received data
Untitled series #210043
-
-
-
2023-05-18
Frank Li
New
[v2,1/2] dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
[v2,1/2] dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
-
-
-
2023-05-15
Frank Li
New
[1/1] usb: cdns3: fix super speed mass storage gadget device failure at imx8qm
[1/1] usb: cdns3: fix super speed mass storage gadget device failure at imx8qm
-
-
-
2023-03-21
Frank Li
New
[v2,1/1] usb: gadget: Assign an unique name for each configfs driver
[v2,1/1] usb: gadget: Assign an unique name for each configfs driver
-
-
-
2022-12-13
Frank Li
New
[v2,1/1] usb: cdns3: host: fix endless superspeed hub port reset
[v2,1/1] usb: cdns3: host: fix endless superspeed hub port reset
-
-
-
2022-10-26
Frank Li
New
[v1,1/1] usb: phy: mxs: apply board calibration value base on chip trim value
[v1,1/1] usb: phy: mxs: apply board calibration value base on chip trim value
-
-
-
2022-08-30
Frank Li
New
[v1,1/2] doc: dt-binding: mxs-usb-phy: fix fsl,tx-cal-45-dn-ohms max and min value
[v1,1/2] doc: dt-binding: mxs-usb-phy: fix fsl,tx-cal-45-dn-ohms max and min value
-
-
-
2022-08-29
Frank Li
New
[1/1] usb: cdns3: fix random warning message when driver load
[1/1] usb: cdns3: fix random warning message when driver load
-
-
-
2022-06-09
Frank Li
New
[1/1] usb: cdns3 fix use-after-free at workaround 2
[1/1] usb: cdns3 fix use-after-free at workaround 2
-
-
-
2022-06-08
Frank Li
New
[v9,1/1] usb: cdns3: allocate TX FIFO size according to composite EP number
[v9,1/1] usb: cdns3: allocate TX FIFO size according to composite EP number
-
-
-
2022-05-09
Frank Li
New
[1/1] usb: xhci-plat: fix crash when suspend if remote wake enable
[1/1] usb: xhci-plat: fix crash when suspend if remote wake enable
-
-
-
2022-01-10
Frank Li
New
[v2,1/1] usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
[v2,1/1] usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
-
-
-
2021-11-30
Frank Li
New
[v2,1/1] usb: cdns3: add power lost support for system resume
[v2,1/1] usb: cdns3: add power lost support for system resume
-
-
-
2021-02-08
Frank Li
New